Gargoyle 1.5.1 is not working in Client+AP mode

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by DoesItMatter »

ofib - are you able to do a little more testing?

I notice your main AP is a D-Link DIR-524?

Can you reverse the config?

Have the TP-Link as the main AP - and see if you can get the
D-Link 524 to connect to the TP-Link router?
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

Hi DoesItMatter,

D-Link 524 is not capable to connect to other routers or even to receive other firmware version such as OPEN-WRT.. It´s a cheap router (laughing) :D ...

I´ll now check out logs from console... if I can detect anything telling causes from this error....

I guess ispyisail is more able to do this test with his router, cause He could simulate this same error... It´s good because it shows not being only an error mine!!

Keep us posted! :!:

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

So, log captured.... By the way using now Gargoyle 1.4.4 version, and notting has changed. It means not only on 1.5.1 it happens...

I didn´t find out anything on it, but maybe you can find out causes. :lol:

See below when I hit "Save changes" what says:

Jan 1 00:00:14 Gargoyle user.info kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:15 Gargoyle user.debug kernel: ath: EEPROM regdomain: 0x0
Jan 1 00:00:15 Gargoyle user.debug kernel: ath: EEPROM indicates default country code should be used
Jan 1 00:00:15 Gargoyle user.debug kernel: ath: doing EEPROM country->regdmn map search
Jan 1 00:00:15 Gargoyle user.debug kernel: ath: country maps to regdmn code: 0x3a
Jan 1 00:00:15 Gargoyle user.debug kernel: ath: Country alpha2 being used: US
Jan 1 00:00:15 Gargoyle user.debug kernel: ath: Regpair used: 0x3a
Jan 1 00:00:15 Gargoyle user.debug kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jan 1 00:00:15 Gargoyle user.info kernel: ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Jan 1 00:00:15 Gargoyle user.info kernel: cfg80211: Calling CRDA for country: US
Jan 1 00:00:16 Gargoyle user.info kernel: RPC: Registered udp transport module.
Jan 1 00:00:16 Gargoyle user.info kernel: RPC: Registered tcp transport module.
Jan 1 00:00:16 Gargoyle user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 00:00:17 Gargoyle user.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: Regulatory domain changed to country: US
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:18 Gargoyle user.info kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 1 00:00:18 Gargoyle user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 00:00:18 Gargoyle user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:19 Gargoyle user.info kernel: NET: Registered protocol family 24
Jan 1 00:00:19 Gargoyle user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 00:00:19 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
Jan 1 00:00:19 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
Jan 1 00:00:19 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
Jan 1 00:00:19 Gargoyle user.info kernel: ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
Jan 1 00:00:19 Gargoyle user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 00:00:19 Gargoyle user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 00:00:19 Gargoyle user.info kernel: hub 1-0:1.0: 1 port detected
Jan 1 00:00:19 Gargoyle user.warn kernel: nf_conntrack version 0.5.0 (460 buckets, 1840 max)
Jan 1 00:00:19 Gargoyle user.warn kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jan 1 00:00:19 Gargoyle user.warn kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Jan 1 00:00:19 Gargoyle user.warn kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jan 1 00:00:20 Gargoyle user.info kernel: xt_time: kernel timezone is -0000
Jan 1 00:00:21 Gargoyle user.info kernel: Hooked IMQ after mangle on PREROUTING
Jan 1 00:00:21 Gargoyle user.info kernel: Hooked IMQ after nat on POSTROUTING
Jan 1 00:00:21 Gargoyle user.info kernel: IMQ driver loaded successfully.
Jan 1 00:00:21 Gargoyle user.info kernel: Ebtables v2.0 registered
Jan 1 00:00:22 Gargoyle user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 00:00:22 Gargoyle user.info kernel: Initializing USB Mass Storage driver...
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 00:00:22 Gargoyle user.info kernel: USB Mass Storage support registered.
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-alauda
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-cypress
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-datafab
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-freecom
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-isd200
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-jumpshot
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-karma
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-sddr09
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-sddr55
Jan 1 00:00:22 Gargoyle user.info kernel: usbcore: registered new interface driver ums-usbat
Jan 1 00:00:22 Gargoyle user.info kernel: fuse init (API version 7.13)
Jan 1 00:00:25 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Jan 1 00:00:25 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering forwarding state
Jan 1 00:00:28 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Jan 1 00:00:28 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering disabled state
Jan 1 00:00:28 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Jan 1 00:00:28 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering forwarding state
Jan 1 00:00:28 Gargoyle user.info sysinit: l2_packet_init: ioctl[SIOCGIFINDEX]: No such device
Jan 1 00:00:28 Gargoyle user.info sysinit: wlan0-1: Failed to open l2_packet connection for the bridge interface 'br-wan'
Jan 1 00:00:28 Gargoyle user.info sysinit: enable_mac80211(radio0): Failed to set up wpa_supplicant for interface wlan0-1
Jan 1 00:00:28 Gargoyle user.info sysinit: configuring empty bridge
Jan 1 00:00:28 Gargoyle user.info sysinit: ifconfig: SIOCSIFADDR: No such device
Jan 1 00:00:28 Gargoyle user.info sysinit: interface none does not exist!
Jan 1 00:00:29 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Jan 1 00:00:29 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering disabled state
Jan 1 00:00:30 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Jan 1 00:00:30 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering forwarding state
Jan 1 00:00:32 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Jan 1 00:00:32 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering disabled state
Jan 1 00:00:32 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Jan 1 00:00:32 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering forwarding state
Jan 1 00:00:34 Gargoyle user.info kernel: device wlan0-1 entered promiscuous mode
Jan 1 00:00:35 Gargoyle user.debug kernel: wlan0-1: authenticate with XX:XX:XX:XX:XX:XX (try 1)
Jan 1 00:00:35 Gargoyle user.debug kernel: wlan0-1: authenticated
Jan 1 00:00:35 Gargoyle user.debug kernel: wlan0-1: associate with XX:XX:XX:XX:XX:XX (try 1)
Jan 1 00:00:35 Gargoyle user.debug kernel: wlan0-1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2)
Jan 1 00:00:35 Gargoyle user.debug kernel: wlan0-1: associated
Jan 1 00:00:35 Gargoyle user.info kernel: br-wan: port 1(wlan0-1) entering forwarding state
Dec 17 00:00:01 Gargoyle user.info sysinit: Error 1 looking up hostname 0.pool.ntp.org
Dec 17 00:00:01 Gargoyle user.info sysinit: Error 1 looking up hostname 1.pool.ntp.org
Dec 17 00:00:01 Gargoyle user.info sysinit: Error 1 looking up hostname 2.pool.ntp.org
Dec 17 00:00:02 Gargoyle user.info sysinit: Loading defaults
Dec 17 00:00:03 Gargoyle user.info kernel: device wlan0-1 left promiscuous mode
Dec 17 00:00:03 Gargoyle user.info kernel: br-wan: port 1(wlan0-1) entering disabled state
Dec 17 00:00:03 Gargoyle user.info kernel: device wlan0-1 entered promiscuous mode
Dec 17 00:00:03 Gargoyle user.info kernel: br-wan: port 1(wlan0-1) entering forwarding state
Dec 17 00:00:03 Gargoyle user.info sysinit: Loading synflood protection
Dec 17 00:00:03 Gargoyle user.info sysinit: Adding custom chains
Dec 17 00:00:04 Gargoyle user.info sysinit: Loading zones
Dec 17 00:00:05 Gargoyle user.info sysinit: Loading forwardings
Dec 17 00:00:05 Gargoyle user.info sysinit: Loading redirects
Dec 17 00:00:05 Gargoyle user.info sysinit: Loading rules
Dec 17 00:00:05 Gargoyle user.info sysinit: Loading includes
Dec 17 00:00:06 Gargoyle user.info sysinit: md5sum: can't open '/tmp/l7marker.marks.tmp': No such file or directory
Dec 17 00:00:06 Gargoyle user.info sysinit: rm: cannot remove '/tmp/l7marker.marks.tmp': No such file or directory
Dec 17 00:00:06 Gargoyle user.info sysinit: Optimizing conntrack
Dec 17 00:00:06 Gargoyle user.info sysinit: Loading interfaces
Dec 17 00:00:06 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Dec 17 00:00:07 Gargoyle cron.err crond[2132]: crond (busybox 1.15.3) started, log level 5
Dec 17 00:00:07 Gargoyle authpriv.info dropbear[2145]: Running in background
Dec 17 00:00:07 Gargoyle daemon.warn httpd_gargoyle[2166]: started as root without requesting chroot(), warning only
Dec 17 00:00:07 Gargoyle daemon.notice httpd_gargoyle[2166]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Dec 17 00:00:09 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Dec 17 00:00:09 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Dec 17 00:00:12 Gargoyle daemon.info dnsmasq[2236]: started, version 2.55 cachesize 150
Dec 17 00:00:12 Gargoyle daemon.info dnsmasq[2236]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Dec 17 00:00:12 Gargoyle daemon.info dnsmasq-dhcp[2236]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Dec 17 00:00:12 Gargoyle daemon.info dnsmasq[2236]: using local addresses only for domain lan
Dec 17 00:00:12 Gargoyle daemon.info dnsmasq[2236]: reading /tmp/resolv.conf.auto
Dec 17 00:00:12 Gargoyle daemon.warn dnsmasq[2236]: ignoring nameserver 192.168.1.1 - local interface
Dec 17 00:00:12 Gargoyle daemon.info dnsmasq[2236]: using local addresses only for domain lan
Dec 17 00:00:12 Gargoyle daemon.info dnsmasq[2236]: read /etc/hosts - 2 addresses
Dec 17 00:00:12 Gargoyle daemon.info dnsmasq-dhcp[2236]: read /etc/ethers - 0 addresses
Dec 17 00:00:13 Gargoyle daemon.warn exportfs[2252]: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Dec 17 00:00:13 Gargoyle user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Dec 17 00:00:13 Gargoyle daemon.err exportfs[2252]: can't lock /var/lib/nfs/etab for writing
Dec 17 00:00:13 Gargoyle user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Dec 17 00:00:13 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Dec 17 00:00:13 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Dec 17 00:00:13 Gargoyle user.info sysinit: setting up led WLAN
Dec 17 00:00:14 Gargoyle user.debug kernel: ar71xx-wdt: enabling watchdog timer
Dec 17 00:00:27 Gargoyle authpriv.info dropbear[2385]: Child connection from 192.168.1.8:1494
Dec 17 00:00:34 Gargoyle authpriv.notice dropbear[2385]: Password auth succeeded for 'root' from 192.168.1.8:1494
Dec 17 00:01:01 Gargoyle cron.err crond[2132]: USER root pid 2392 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Dec 17 00:01:16 Gargoyle cron.err crond[2530]: crond (busybox 1.15.3) started, log level 5
Dec 17 00:01:17 Gargoyle daemon.info dnsmasq[2236]: exiting on receipt of SIGTERM
Dec 17 00:01:18 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering disabled state
Dec 17 00:01:18 Gargoyle user.info kernel: br-lan: port 2(eth0.2) entering disabled state
Dec 17 00:01:18 Gargoyle user.info kernel: br-lan: port 1(eth0.1) entering disabled state
Dec 17 00:01:18 Gargoyle user.info kernel: device eth0 left promiscuous mode
Dec 17 00:01:18 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Dec 17 00:01:18 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering disabled state
Dec 17 00:01:18 Gargoyle user.info kernel: device eth0.2 left promiscuous mode
Dec 17 00:01:18 Gargoyle user.info kernel: br-lan: port 2(eth0.2) entering disabled state
Dec 17 00:01:18 Gargoyle user.info kernel: device eth0.1 left promiscuous mode
Dec 17 00:01:18 Gargoyle user.info kernel: br-lan: port 1(eth0.1) entering disabled state
Dec 17 00:01:19 Gargoyle user.info kernel: br-wan: port 1(wlan0-1) entering disabled state
Dec 17 00:01:19 Gargoyle user.info kernel: device wlan0-1 left promiscuous mode
Dec 17 00:01:19 Gargoyle user.info kernel: br-wan: port 1(wlan0-1) entering disabled state
Dec 17 00:01:21 Gargoyle user.notice ifup: Enabling Router Solicitations on loopback (lo)
Dec 17 00:01:22 Gargoyle user.info kernel: device eth0.1 entered promiscuous mode
Dec 17 00:01:22 Gargoyle user.info kernel: device eth0 entered promiscuous mode
Dec 17 00:01:22 Gargoyle user.info kernel: br-lan: port 1(eth0.1) entering forwarding state
Dec 17 00:01:22 Gargoyle user.info kernel: device eth0.2 entered promiscuous mode
Dec 17 00:01:22 Gargoyle user.info kernel: br-lan: port 2(eth0.2) entering forwarding state
Dec 17 00:01:23 Gargoyle user.debug kernel: wlan0-1: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (reason=3)
Dec 17 00:01:23 Gargoyle user.notice ifup: Enabling Router Solicitations on lan (br-lan)
Dec 17 00:01:26 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Dec 17 00:01:26 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering forwarding state
Dec 17 00:01:29 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Dec 17 00:01:29 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering disabled state
Dec 17 00:01:29 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Dec 17 00:01:29 Gargoyle user.info kernel: br-lan: port 3(wlan0) entering forwarding state
Dec 17 00:01:29 Gargoyle user.info kernel: device wlan0-1 entered promiscuous mode
Dec 17 00:01:30 Gargoyle user.debug kernel: wlan0-1: authenticate with XX:XX:XX:XX:XX:XX (try 1)
Dec 17 00:01:30 Gargoyle user.debug kernel: wlan0-1: authenticated
Dec 17 00:01:30 Gargoyle user.debug kernel: wlan0-1: associate with XX:XX:XX:XX:XX:XX (try 1)
Dec 17 00:01:30 Gargoyle user.debug kernel: wlan0-1: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=2)
Dec 17 00:01:30 Gargoyle user.debug kernel: wlan0-1: associated
Dec 17 00:01:30 Gargoyle user.info kernel: br-wan: port 1(wlan0-1) entering forwarding state
Dec 17 00:01:33 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Dec 17 00:01:34 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Dec 17 00:01:34 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Dec 17 00:01:37 Gargoyle daemon.info dnsmasq[4189]: started, version 2.55 cachesize 150
Dec 17 00:01:37 Gargoyle daemon.info dnsmasq[4189]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Dec 17 00:01:37 Gargoyle daemon.info dnsmasq-dhcp[4189]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Dec 17 00:01:37 Gargoyle daemon.info dnsmasq[4189]: using local addresses only for domain lan
Dec 17 00:01:37 Gargoyle daemon.info dnsmasq[4189]: reading /tmp/resolv.conf.auto
Dec 17 00:01:37 Gargoyle daemon.warn dnsmasq[4189]: ignoring nameserver 192.168.1.1 - local interface
Dec 17 00:01:37 Gargoyle daemon.info dnsmasq[4189]: using local addresses only for domain lan
Dec 17 00:01:37 Gargoyle daemon.info dnsmasq[4189]: read /etc/hosts - 2 addresses
Dec 17 00:01:37 Gargoyle daemon.info dnsmasq-dhcp[4189]: read /etc/ethers - 0 addresses

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ispyisail »

I guess ispyisail is more able to do this test with his router, cause He could simulate this same error... It´s good because it shows not being only an error mine!!

Keep us posted! :!:
I've done a new build from the SVN and I think the problem may be solved

for the brave

AT YOUR OWN RISK

http://goo.gl/yuya7

I'm using dropbox, I got banned for 3 days for over usage so hopefully its working again

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

Hi ispyisail,

I'll try it out... can you tell me where the problem was?

May wireless driver outdated?

Will it include in Gargoyle 1.4.5 / 1.5.2 ? :shock:

Thanks a lot!

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ispyisail »

Will it include in Gargoyle 1.4.5 / 1.5.2 ? :shock:
yes

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

Can you tell me what the problem was?

Any idea when official release will be delivered?

:D

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ispyisail »

no and no

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

I really look forward to having official release with this fix.....:mrgreen:

Come on moderators... make my Christmas better!!! :lol:

Best wishes!!

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by DoesItMatter »

ispyisail,

Was this router specific? I.e. TP-Link related?

I didn't seem to have an issue on my D-Link is why I ask.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

Post Reply