Gargoyle 1.5.1 is not working in Client+AP mode

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

Yes, I´ve already done it... many times!!

As bridge works I can navigate inside Ana´s range (192.168.0.X), Client works as well, everything works... just Client AP not!!

Is there any kind of log somewhere to allow me to get more details about this freaking error? Gargoyle logs ? :roll:

Regards,

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ispyisail »

I haven't been following this thread but have decided to do some tests

TP-Link TL-WR1043ND v1-1.8
1.5.1
fresh install with nothing running (e.g tor)

When setting up "Client + AP" the router did some strange things. In fact the connection to the internet stopped. I rebooted the router and every thing in running perfect.

I would like to pint out that both wireless connections are not encrypted

Will see how long "client + AP" runs for?

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

Hi ispyisail,

I changed to "No Encryptation" and nothing changed, even given a boot on router... It´s a freaking error this...

I put enclosed my configuration to you have a look at it.

Any new ideas guys? Moderators is there any Gargoyle with new drives to TPLINK 1043 that I could test?

still looking for solutions... :idea:

Regards,
Attachments
No Authe
No Authe
WirelessNoAuth.PNG (32.87 KiB) Viewed 5931 times

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ispyisail »

Mine works perfect, been working perfect for a few hours now

TP-Link TL-WR1043ND v1-1.8

Image

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ispyisail »

I changed to "No Encryptation" and nothing changed, even given a boot on router... It´s a freaking error this...

I put enclosed my configuration to you have a look at it.

Any new ideas guys? Moderators is there any Gargoyle with new drives to TPLINK 1043 that I could test?
Are both your routers on the same subnet?

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

Hi ispyisail,

So, my Ana's router is over 192.168.0.X range, and I'm creating a new LAN over 192.168.1.X, it means different networks.

I saw you got success with no encryption, could you try with WPA2 PSK and check out if it works well in both Wireless networks?

I guess that our only different point would be the router version, my is TP-Link TL-WR1043ND v1.6. May it be the cause?

Let me know for news...

Regards,

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ispyisail »

I guess that our only different point would be the router version, my is TP-Link TL-WR1043ND v1.6. May it be the cause?
True

http://www.gargoyle-router.com/wiki/dok ... nt_ap_mode

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

so, how can I solve this?

Is there any update to my version 1.6, driver etc, etc.... ?

Anyone has the same version mine to try it out and see if it happens as well ?

Let me know.

Thanks!!!
Last edited by ofbizbrazil on Sat Dec 17, 2011 5:49 pm, edited 1 time in total.

ofbizbrazil
Posts: 65
Joined: Mon Dec 05, 2011 7:56 pm

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ofbizbrazil »

ispyisail,

Could you check out if using WPA2-PSK works too ?

Maybe the problem is this....

Please try it with yours.. :D

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.5.1 is not working in Client+AP mode

Post by ispyisail »

ofbizbrazil wrote:ispyisail,

Could you check out if using WPA2-PSK works too ?

Maybe the problem is this....

Please try it with yours.. :D
I'm am trying but my router has spat the dummy when trying to reconfigure

I now need to reset the router using fail safe

Post Reply