No 5 Ghz WLAN on Archer C7V5, 1.12.0

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
LudwigX
Posts: 5
Joined: Tue Jan 07, 2014 8:08 am

No 5 Ghz WLAN on Archer C7V5, 1.12.0

Post by LudwigX »

WLAN config: https://imgur.com/8ZVOwi1


I used the router as wireless bridge, which also used 5 Ghz, so it should work.
However in AP mode the 2,4 WLAN works fine but I can't find the 5 with any devices, even after waiting a minute.

LudwigX
Posts: 5
Joined: Tue Jan 07, 2014 8:08 am

Re: No 5 Ghz WLAN on Archer C7V5, 1.12.0

Post by LudwigX »

I've reseted the router to the default settings and then tried some different channels:

36 works
52 DFS Channel doesn't work (waited 3+ mins)
100 DFS Channel doesn't work (waited 3+ mins)
116 working DFS Channel
132 working DFS Channel
149 works


There are already other WLANs on channel 52 and 100. But it should work nonetheless, shouldn't it?

RomanHK
Posts: 794
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: No 5 Ghz WLAN on Archer C7V5, 1.12.0

Post by RomanHK »

Probably a problem in WiFi drivers ? :?
(https://forum.openwrt.org/t/does-wifi-5 ... uild/55251).

:idea: You can try the v1.13.x beta from @Lantis viewtopic.php?f=14&t=12467 - then let me know if it helped.

EDIT: I've always had a problem with DFS channels (and I'm far from radars). I sacrificed power and set up channel 36 and I haven't had a problem since.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

Post Reply