WAN Speed issue on WRT32X

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
softstorm
Posts: 10
Joined: Mon Dec 23, 2019 11:47 pm

WAN Speed issue on WRT32X

Post by softstorm »

First post, long time user. My TP-Link Archer C7 v2 with 1.12.0 shows 100Mbps to fast . com. Wanting better wireless, I swapped it for a much newer Linksys WRT32X with 1.12.0 and the same config, but get less than 10Mbps. Am using a brand new Cat6 cable, the cable modem Phy LED is the same color with both, negotiated 1Gbps, and I tried inserting gigE and fast ethernet switches in the middle with no change. No QoS in my configs, tiny CPU and memory usage. Any ideas what I can check to debug this?

I have another WRT32X at another location that runs 300Mbps no problem, on 1.11.0.

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: WAN Speed issue on WRT32X

Post by Lantis »

You're confident qos isn't enabled? Because 10mbps is the default qos speed.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

softstorm
Posts: 10
Joined: Mon Dec 23, 2019 11:47 pm

Re: WAN Speed issue on WRT32X

Post by softstorm »

Sorry for the holiday delay. That was it, not sure how the upload/download QoS boxes got ticked, but it's all better now. Thanks!

Post Reply