I have a similar problem, but with the TL-WR1043ND V2, and I insist on my answers: viewtopic.php?f=14&t=11829&start=110#p51805RonV wrote:I have a similar issue with 2.4G WIFI. What appears to happen is that the WIFI signal is still there but the authentication is lost (I am unsure if the WIFI signal drops out then comes back). Clients trying to connect get "Invalid password" even though the password is correct. This only happens on 2.4G, using 5G is working perfectly. After a reboot 2.4G works fine for a while then for an unknown reason stops working again.
As all my lights and TV remote use 2.4G I've hooked the TPG supplied router back up until I can get this fixed. I will have a go at the "Gargoyle Factory Reset" tomorrow.
Ron
Edit: Gargoyle version is v1.11
Wifi connection lost
Moderator: Moderators
Re: Wifi connection lost
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users