Guest networks connects, but the normal one won't

[Lantis]

Thanks, good investigation on the quotes.
I slightly changed the solution to be a one liner anyway but as long as it is working that’s good.

Rog66 do you mind opening a new thread with the details you just posted and a copy of “iw phy0 info” and “iw phy1 info” and “cat /tmp/cached_basic_vars” and I’ll take a look? DFS works fine on my device but it’s also a special case because the driver doesn’t properly load any power tables for me.

[RomanHK]

Here you can try a fix and a new build from @ispyisail: viewtopic.php?f=14&t=11965

[he0960]

I had the same problem with version 1.11.0 as carverofchoice. After testing with the build 20190424 I can confirm that wlan 2+5GHz and guest network 2+5GHz with build 20190424 works correctly. A small limitation in the guest network, here it was necessary if you e.g. only 2G wanted to save once with 2g + 5g (enabled) and then in the second step to set (enabled 2GHz only). After that, everything worked as desired. Also the shutdown of the SSiD transmission was tested.
Thank you for the great work here!

[Lantis]

There shouldn’t be a need to “save twice”.
What issue were you experiencing without doing this?

[he0960]

Even with several attempts, I could not adjust the error of yesterday. Yesterday the message "Please Wait Settings Are Applied" was frozen. Unfortunately, maybe my mistake ?. Anyway, currently everything works as expected.