Gargoyle Forum

hi
i set gargoyle router it work AP WDS wireless
and other routers in other places works repeater or receive wireless from gargoyle
the problem any device connect to repeater router failed obtaining IP some times but if connect gargoyle router direct success obtaining IP
my network component
main router 192.168.1.1 (bridge) cable to wan Ethernet gargoyle router 192.168.3.1 (ap wds)
repeater (1) 192.168.3.50
repeater (2) 192.168.3.8
What solve this problem ?? i am reading in other page gargoyle soft has problem in dchp ? it realy ?

tariqissa wrote: the problem any device connect to repeater router failed obtaining IP some times but if connect gargoyle router direct success obtaining IP

Smells like your issue is not the main router. DHCP issues with gargoyle/openwrt would hit a lot of people, including developers, so I strongly believe thats not the case.

Which brand are your repeaters? I`ve seen this behavior in TPLink ones many many times already.

Yes sear
My main router is tplink 841 v5 and reapeter router also tp link 841 v5
Does changing the router model solve this problem?

Which firmware version you are using on the repeater?

original firmware from tp link Firmware Version:
3.12.5 Build 100929 Rel.57776n

tariqissa wrote:original firmware from tp link Firmware Version:
3.12.5 Build 100929 Rel.57776n

Chage it to gargoyle 1.9.2 or previous. The problem should disappear. Plz report back

I did it in last time but the problem was stayed
all repeater changing to gargoyle whithout benifits
Some time good conection and other time faild obtaining ip but if restarting main router it working well