No Block MAC Address Option in gargoyle 1.10.0

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
Desert Eyes
Posts: 3
Joined: Sat Aug 11, 2018 2:20 pm

No Block MAC Address Option in gargoyle 1.10.0

Post by Desert Eyes »

I can’t find block mac address in static ip section of gargoyale 1.10.0 for tplink 841N. How can i update or use other option for fixing static ip to mac addresses because user change static ip and bypass Allocated qoutas

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: No Block MAC Address Option in gargoyle 1.10.0

Post by ispyisail »

Use fixed IP address

Image

and/or

Turn off of reduce the IP pool

Image

Desert Eyes
Posts: 3
Joined: Sat Aug 11, 2018 2:20 pm

Re: No Block MAC Address Option in gargoyle 1.10.0

Post by Desert Eyes »

When i assign static ips internet stops working over devices assigned static ips. I forcefully have to 1st assign them dhcp ips and then turn dhcp. But if i again have to add any device same procedure enabling dhcp assiging ip and turning off dhcp is to be carried out. Butt issue hard work is not but i have assigned bandwidth qouta on fixed ips but when adding new device ips shuffle and all qouta assignments are mixed up

ispyisail
Moderator
Posts: 5180
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: No Block MAC Address Option in gargoyle 1.10.0

Post by ispyisail »

When i assign static ips internet stops working over devices assigned static ips.
You need to get this working

I suspect a rule you have created is doing the blocking.

I would reset the router and start again (or something to this effect)

Post Reply