Page 1 of 2
Port Forwarding not working.
Posted: Fri Jun 15, 2018 6:46 pm
by BTr
Guys, hello! First post here.
I'm using Gargoyle 1.10 on my Archer C7 V2 (clean installation), apparently after setting it up everything was 100%, but it looks like Port Forwarding is not working at all. All individual ports and ranges that I opened appear as closed when tested. Any light? Apparently everything is fine in settings, I do not know what to do. I need that ports.
I´m trying these 3 sites to test the ports:
yougetsignal
portchecker
canyouseeme
I did a test using UPnP. In this test i opened a UPnP port in QbitTorrent and the test was ok, so i suppose it´s working. But setting manually doesn't.
Please help me here, thanks
Re: Port Forwarding not working.
Posted: Fri Jun 15, 2018 9:37 pm
by Lantis
Do you have another modem or router in front of Gargoyle? If so, you’ll need to forward there as well, or put Gargoyle in a DMZ.
Otherwise, please share more information about your setup.
Re: Port Forwarding not working.
Posted: Fri Jun 15, 2018 10:18 pm
by BTr
Lantis wrote:Do you have another modem or router in front of Gargoyle? If so, you’ll need to forward there as well, or put Gargoyle in a DMZ.
Otherwise, please share more information about your setup.
My setup is simple. The VDSL modem connected in Archer C7 (modem is in bridge mode). I have a powerline adapter connected to it too, as a repeater.
I set the PS4 IP in DMZ . All of gadgets are using static IPs set in DHCP.
Re: Port Forwarding not working.
Posted: Sat Jun 16, 2018 4:49 am
by Lantis
You also need to have something on the other end listening, or your OS firewall is likely going to just silently drop the packet by default.
For example, i have a particular port open, but it shows as closed on all 3 of the sites you mentioned.
When i fire up sscom to listen on the particular port, it shows as open.
Re: Port Forwarding not working.
Posted: Tue Jun 19, 2018 1:52 pm
by gu3d3s
BTr wrote:
My setup is simple. The VDSL modem connected in Archer C7 (modem is in bridge mode). I have a powerline adapter connected to it too, as a repeater.
I set the PS4 IP in DMZ . All of gadgets are using static IPs set in DHCP.
Veja se realmente seu modem esta em bridge, pois ja tive problemas com a Vivo parecido com este usando um C7 e a causa era o equipamento do ISP.
Re: Port Forwarding not working.
Posted: Tue Jun 19, 2018 3:06 pm
by ispyisail
In the past Eric has deleted any post that is not in English
Re: Port Forwarding not working.
Posted: Tue Jun 19, 2018 3:07 pm
by ispyisail
See if your modem is actually in bridge, because I already had problems with Vivo similar to this using a C7 and the cause was the equipment of the ISP.
Re: Port Forwarding not working.
Posted: Tue Jun 19, 2018 5:13 pm
by BTr
gu3d3s wrote:
Veja se realmente seu modem esta em bridge, pois ja tive problemas com a Vivo parecido com este usando um C7 e a causa era o equipamento do ISP.
ispyisail wrote:
See if your modem is actually in bridge, because I already had problems with Vivo similar to this using a C7 and the cause was the equipment of the ISP.
I'm sure it is.
Router is doing PPPoE authentication, i even disabled the Vivo's Powerbox wi-fi.
The strange thing is that opening ports via uPnP are working ok.
I have deactivated uPnP and DMZ to see If one of these services are giving troubles, but nothing.
I dont know what to do anymore...
Re: Port Forwarding not working.
Posted: Tue Jun 19, 2018 8:28 pm
by Lantis
Did you read what I suggested? I expect it is working fine.
Re: Port Forwarding not working.
Posted: Tue Jun 19, 2018 8:51 pm
by fifonik
I'm also using 1.10 on C7 v2.
Port forwarding working fine in my case.