Max 100Mbps speed on wired connection WDR4300

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
jpomykala
Posts: 1
Joined: Mon Mar 20, 2017 6:04 pm

Max 100Mbps speed on wired connection WDR4300

Post by jpomykala »

Hello,
i'm using Gargoyle 1.8.1 on WDR4300 v1.
Wired connection
Direct connection to modem i'm getting 280Mbps/480Mbps
Wired connection through WDR4300 with Gargoyle 100Mbps/100Mbps

How can I improve speed through router. I'm not using QoS

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Max 100Mbps speed on wired connection WDR4300

Post by Lantis »

You're at the maximum of your routers CPU limits.
You cannot improve it.

The stock firmware uses hardware acceleration to go faster.
Third party firmware cannot do this.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

tapper
Moderator
Posts: 1076
Joined: Sun Oct 13, 2013 5:49 pm
Location: Stoke-on-trent UK

Re: Max 100Mbps speed on wired connection WDR4300

Post by tapper »

Btw 1.9.2 is much better than 1.8.1 imo
Linksys WRT3200ACM
NETGEAR Nighthawk R7800
NETGEAR R6260

jorgecorazondeleon
Posts: 48
Joined: Tue Oct 02, 2012 5:27 pm

Re: Max 100Mbps speed on wired connection WDR4300

Post by jorgecorazondeleon »

Hi:
router: wdr4300 v1
Gargoyle version:1.9.X (Built 20170414-1611 git@c37f4bb
DHCP (wired)
QoS: NO
My internet provider has uploaded the speed at 100 Mbps.
I get that speed with the modem.
With the router I did not reach 51 Mbps.
(PING:16 ms DESCARGA:50.83 Mbps CARGA:8.30 Mbps)
I want to revert, (if there is no other solution) to the stock firmware.
Is it possible via the web?
Do I need the stock firmware to be just "up" or can it be up boot?
I only found a firmware stock up: wdr4300v1_en_3_13_31_up (130319)

jorgecorazondeleon
Posts: 48
Joined: Tue Oct 02, 2012 5:27 pm

Re: Max 100Mbps speed on wired connection WDR4300

Post by jorgecorazondeleon »

Before returning to the firmware stock, I tried
"Restore Default Configuration" and reconfigured it, without using QoS and solved the problem, now if I achieve the 100 mbps,
I like gargoyle and did not want to leave it

PING
16 ms
DESCARGA
100.44 Mbps
CARGA
8.10 Mbps

Post Reply