Gargoyle Forum

My apologies for that , here is my traceroute on 8.8.8.8 as shown below.
http://prntscr.com/2nx2es

I have tried setting at 60ms and it seems the link limit is playing
around 21Mbps or 24 Mbps, Also tried 40ms and the link goes down to 12 Mbps.

Hi pbix, I have tried to reset my router to default settings and manually configured everything. And manually set non-standard ping target to 8.8.8.8 and ping limit to auto. under acc mode downloading iso and torrent: http://prntscr.com/2nq8pc as you can see the link limit is 19.7 Mbps when on this ...

fyi,

Issue resolved by rebooting the router.

thanks

Hi,

do you have a solution for this error? I have the same problem right now. I still have an internet but the router doesn't reboot by itself, please advise.

Thanks

Hi pbix, Thanks for your reply. I have tried to manually set non-standard ping target to the following dns: 208.67.220.220 208.67.222.222 8.8.8.8 8.8.4.4 but, still after 8 hours of observation, I lost half of my bandwidth and the link limit does not rolled back to it's available bandwidth even thou...

Hi All, Update after 5 hours of manually setting "the non-standard ping target:8.8.8.8" and leave "custom ping limit to auto". With the ACC idle, my link load is 9.5 Mbps, double check that with speedtest and it's 9.5 Mbps. so I lost almost 12-14 Mbps as I have 24 Mbps when doing...

My QoS works but after a couple of days the link limit goes down to 3Mbps even though there is no load on the link, it doesn't dynamically rolled back to the previous link limit. I have asked this question on the forum (http://www.gargoyle-router.com/phpbb/viewtopic.php?f=11&t=4949) and was able...

FYI,

Confirmed preserving settings from 1.5.11 to 1.6.0 works.

Thank you all.

For those users that have already installed this 1.6.0 firmware, Does preserving configuration from 1.5.11 to 1.6.0 will not cause any problem, please advise?

I will try to flash it tonight when I get home from work.

Thanks to gargoyle dev for this awesome firmware.

Thanks pbix, I will try vnstat as well.