Gargoyle Forum

Next try, same outcome. At around 09:10, Delete keys, setup server and one client, 35s for the "busy" spinner to close, logfile as follows: Fri Apr 7 09:05:13 2023 daemon.notice netifd: wwan (9441): udhcpc: received SIGTERM Fri Apr 7 09:05:13 2023 daemon.notice netifd: wwan (9441): udhcpc:...

Something is proper broken there, you’ve got not config files or certificates. Disable, click clear certificates. Start from scratch. Set it up with at least 1 client. Let it finish. That is what I did prior to this last try. There may be a race condition on the network restarting which is causing ...

Hi Lantis, for the last test, I was in server mode and didn't specify a client yet. I tried again, this time with a client specified, but the logfile was again being flooded with error messages. Is it trying to start the server prior to finishing the initialization of the keys? [edit] Half an hour l...

@ektus Did you upgrade the firmware or fresh install and then re-program? No update. Fresh install on all routers as the version gap was way too large. I was coming from 1.11 and 1.12, respectively. On the main router, I did copy over some OpenVPN-related files and manually edited the dhcp file, bu...

The OpenVPN errors are flooding the logfile. Disabling the defunct OpenVPN server again solves that particular problem. This secondary Archer is running in Wireless Bridge/Repeater mode. It works, but on the System/Router Access page, I get a red warning telling me Web Access Web Admin Protocol: [ht...

Tried to copy over the existing config, but got no working openVPN Server yet. It's running, but can't decode the connection request. So I let it be, installed this version on another Archer C7 V5 and tried to setup openVPN Server from scratch on that one. Big failure at the very beginning when init...

Just a short feedback: Installed the version from February 26th, 2023 successfully on 1) one of my TP-Link TL-WR1043ND V2 routers (sysupgrade), but had to revert back due to problems with my reverse wifi bridge setup. 2) my spare Archer C7 V5 (factory) in order to prepare it for main router duty. Wo...

Okay, so I'm back on 1.7.x for the time being. The reason for this reverse setup is that while the small WR702N can operate as WiFi Client, I've had issues with the stability of the connection and no means of restarting it remotely. By moving the initiator of the bridge into the main network, I have...

It's in reverse from the diagram on the wiki page: https://www.gargoyle-router.com/wiki/doku.php?id=bridge_repeater The middle one is running Gargoyle in bridge mode. In my setup, the main router is located to the right. 192.168.0.180: Main Router, Internet Gateway. In the Diagram this would be 192....

The remote AP is a TP-Link WR702N running stock firmware. Main page see screenshot:

http://www.ektus.de/bilder/2023-04-03%2 ... WR702N.png