Gargoyle Forum

In my case, possibly problems with the power supply. It's a 2,5" HDD (Toshiba 2TB) that pulls 500mA upon startup, which might be a bit much for the Archer C7 it's attached to. I've since added a powered hub in between, so will have to keep watching. Anyway, hitting save without having changed a...

Could you simply add a "restart samba/cifs/ftp/whatever" button on the usb storage page? I've been hitting the same problem, and solved it by issuing /etc/init.d/samba reload from the web shell. Found that one here on the forums in https://www.gargoyle-router.com/phpbb/viewtopic.php?t=2483...

v4 - v5 WPS/Reset Button: Short Press = Toggle wifi on/off Long Press = Factory reset Reset Button: Short Press = Reboot router/reset Long Press = Factory reset Wouldn't it be better to have an "erase usage data" for long press on the WPS button? That way, if there were a reboot loop due ...

The C7 should have a reset button on the back. At least mine has. It's not recessed, but very tiny. It's labeled WPS/RESET. With stock firmware, it initiates WPS if pressed briefly and reset if pressed for more than 5 seconds. The power button is a physical switch that interrupts the power supply. R...

I want to prevent 192.168.0.13 from having any internet access (except DNS and NTP, if I can't redirect the latter to my local time server). If you want IP 192.168.0.13 to only have access to DNS and NTP, the rule should look like this: https://i.imgur.com/QVIO3Gr.png The firewall works well, but i...

I want to block some devices, but if I do so, save the setting and open it up again for editing, it switches back from "nothing allowed" to "everything allowed". A screenshot and a more detailed description will help us. Even with a setting to block everything but the global DNS...

In language manager, when a second language is installed, the default language (english) can be selected, but the name isn't displayed in the list.

Installed on my Archer C7 V2. Configured from scratch (well, mostly, copied over dhcp config and hosts), but am running into a problem with the firewall configuration. I want to block some devices, but if I do so, save the setting and open it up again for editing, it switches back from "nothing...

I did issue the firstboot command, which didn't finish. After that, I tried mounting /dev/mtdblock3 to overlay but was lacking the necessary "-t jffs2" parameter. Adding that one, the partition is mounted but seems to have been erased as announced by jffs2reset. Okay, will try another reb...

mount_root takes a second or two, but seems to do nothing. Yes, it just happens, but the command will be executed in the background. a) FAILSAFE MODE is very limited. b) mount_root gives you access to the "/overlay" folder (in this directory is all configuration) after entering "moun...