Gargoyle Forum

Trying to re-install a missing package (gargoyle) with OPKG, but receiving a following message: b]ONLY HAVE 0 KB AVAILABLE ON FILE SYSTEM, PKG GARGOYLE NEEDS 238 [/b] The router is a WRT54G v3.0, Gargoyle was installed before, so there should be enough room to reinstall a not installed package ! Any...

thanks for the reply modified opkg.conf , copy/paste below: src/gz snapshots http://gargoyle-router.com/packages/backfire/brcm47xx src gargoyle http://gargoyle-router.com/packages/backfire/brcm47xx dest root / dest ram /tmp lists_dir ext /var/opkg-lists option overlay_root /jffs did "opkg updat...

thanks for the reply, this is what I did: found opkg.conf in /etc here is what is in there src/gz snapshots http://downloads.openwrt.org/kamikaze/8.09.2/brcm-2.4/packages dest root / dest ram /tmp lists_dir ext /var/opkg-lists option overlay_root /jffs changed to src/gz snapshots http://gargoyle-rou...

I have removed some packages with OPKG to make some empty space, now the gargoyle login window does show up properly. I still can see "something" when go to 192.168.1.1 I believe I need to restore three packages: 1)gargoyle-1.3.16-6 2)webmon-gargoyle-1.3.16-6 3)gargoyle-firewall-util My se...

since there is no reply, I went ahead and installed gargoyle-brcm947xx on my wrt54g v3.0 router logged into with putty, and immediately saw some changes there: --/jffs is no longer there former serial ports /dev/tts/0 and 1 changed to /dev/ttyS0 and 1 , which is a standard linux designation for seri...

since I got no reply, decided to do a trial & error approach used openwrt wer gui (luci) >>>software >>>upgrade firmware page 1)selected --wrt54g file >>>received reply: not compatible format 2)selected ---bcm947xx file >>>>>upgrade went through Now I have a nice gargoyle web interface !

there is two different file which seems like would work for wrt54g v3.0 :

1)---brcm47xx (because wrt54g has a brcm4712 chip)
2)---wrt54g (because it is the model number)

Which one should I use ?
What is the difference between those two ?

Thanks

I have a modded wrt54g router with working serial ports /dev/tts/0 and /dev/tts/1 (using open-wrt kamikaze 8.09)
want to install gargoyle, probably do a clean install through tftp
wondering about if software support for these 2 serial ports will be still there after install ?
thanks