Gargoyle Forum

Hi

What about Restore Old Configuration and Attempt to Preserve Settings from 1.5.7 to 1.5.8 ?

Any success for TL MR3420 ?

Hi,

http://bikemike.webnode.com/products/se ... le-router/

This tutor have instructions to configure OpenDNS and blocking access.

Should it really work or there is any bug in 1.5.7?

Hi any know inssue with Opendns DDNS server ? I cant config router / opendns to block sites Router is logged in opendns, I can see networkip there. Configured as: to force clients to use router dns server WAN DNS Server(s):208.67.220.220 208.67.222.222 208.67.220.220 208.67.222.222 192.168.25.1 ( th...

0% CPU load ?

Connections:940/4096
CPU Load Averages:0.00 / 0.02 / 0.08 (1/5/15 minutes)

If it is upload, then the source should be your local computer, not the destination - of course it won't work this way.

You are right,
I was confused cause there was some default rules using ports and destination there.
thanks

jorgemiguel4, About password: - Remove power from router, then reconnect and start clicking fast on QSS button until SYS Led starts blinking very fast - Set you computer IP to 192.168.1.2 - Connect your router using Telnet 192.168.1.1 with putty or whatever you use... Execute the commands: - mount_r...

Looks like there is an issue with your QoS rule and also possibly your network configuration not being ideal. e.g. why do you need another QoS rule on the wireless repeater when you already have one at the master router? Why do you set Destination: 192.168.2.100 ? This seems to be the reason why Qo...

I have 2 routers MR3420 Master router in Gateway mode - Connect Via: DHCP wired - LAN IP Address:192.168.2.1 - QoS Upload:Enabled - QoS "Normal" Rule Max BW = 700k for Destination: 192.168.2.100 Remote router in Wireless Bridge/Repeater - Connected Via:Client Bridge - Bridge IP Address:192...

Hi

Network have 2 routers, TPLINK MR3420.

What is best config. to put one router as DHCP and DNS server and second as repeater ?

thanks !