Gargoyle Forum

Unplug the router's power cord. Configure your PC with a static IP address between 192.168.1.2 and 192.168.1.254. E. g. 192.168.1.2 (gateway and DNS is not required). Turn Router: SYS LED begins to flash, press and hold the QSS button until the SYS LED flashes quickly telnet 192.168.1.1 mtd -r erase...

i have same issue with HP deskjet 1400 series ... printer in windows is showed as not connected / not responding ... but i first try USB on 1.5.9. I do not know if on lower firmware works. /etc/config file on p910nd, if you've upgraded, it must be adjusted manually. config p910nd option device /dev...

ispyisail wrote:

homolka wrote:

ispyisail wrote:serial cable will fix it

I have the same problem, the device can not be seen even on the serial console.

are you 100% your serial cable is connected properly?

I tried by http://wiki.openwrt.org/toh/tp-link/tl- ... ftp.method

my device is 941ND

ispyisail wrote:serial cable will fix it

I have the same problem, the device can not be seen even on the serial console.