Gargoyle Forum

francisuk1989 wrote: Go to Connection > Basic
DHCP
Start 1
end 252
bitatone modem

bitatone doing DHCP and 740 too that will result in double NAT

Also notice that in my tp Link router I am connected via dynamic IP that is working perfectly. My advise, stay in Stock, no one is to confirm you any, and who ever does its a guess, every network scenario it's dif. and your issue is a miss configuration, and only you can solve it, there are lots of...

what change i should make now ?? I recreated your scenario my ISP Gateway is 192.168.1.254 and ISP DHCP is 192.168.1.50 to 192.168.1.253 see screenshot, the only issue i found is if i used ISP DNS I could not surf the web until I changed to Google DNS http://s24.postimg.org/cdeagm9ut/GARGOYLE.jpg s...

Janith wrote:I have the router TL-WR841ND but the version is 9.4 would it still work.

yes dowload Ver 9
gargoyle_1.8.0-ar71xx-generic-tl-wr841n-v9-squashfs-factory.bin

TP-WR741ND v5.0 Barrier Breaker 14.07 howto
https://forum.openwrt.org/viewtopic.php?id=58903

in this topic I posted this link ftp://tplink-forum.pl/orgin_bez_boot/ and this one too http://www.friedzombie.com/tplink-stripped-firmware/ you have lots of Tp-Link stripped firmware, all you need is to download your version and through gargoyle interface upload it

My advise, don't get desperate, wait for the answer, from someone that knows, I had read of many bricking Unifi for not loading the proper firmware, the right way, I remember reading this one been done via TFTP Ask the same question at OpenWrt, it will it be the same file, but it will give you a gre...

nworbnhoj wrote:basic QOS will operate if you tick QOS Upload, QOS Download and QOS Download Active Congestion Control.

Doesn't he has to input 95% of his download & upload

Just place it Before the AP, and yes it will work