Gargoyle Forum

Router Model: Ubiquiti EdgeRouter X (ER-X) Link to Openwrt wiki: https://wiki.openwrt.org/toh/ubiquiti/ubiquiti_edgerouter_x_er-x_ka Is it supported in Openwrt Chaos_Calmer Branch? NO. https://downloads.lede-project.org/snapshots/targets/ramips/mt7621/lede-ramips-mt7621-ubnt-erx-squashfs-sysupgrade....

That is an openwrt function, not Gargoyle. If it isn't working i don't believe it is through fault of Gargoyle. Maybe your expectations of what it does are not aligned with its actual purpose? But i wouldn't know, because you still haven't explained exactly what you're trying to achieve. There's a ...

Lantis wrote:What do you mean by isolation?
Isolation from what?
Each wireless client? The LAN? The WAN?

Guest Network
Wireless Client Isolation

Hi all: Guests with 5G can visit Gateway. Isolation with 2.4G is OK. /etc/config/wireless: config wifi-iface 'ap_gn_g' option device 'radio0' option mode 'ap' option network 'lan' option disassoc_low_ack '0' option is_guest_network '1' option macaddr 'bc:01:**:**:71:23' option ssid 'CMCC-**' option ...

Please try http://lantisproject.com/gargoyle_custom/x86/ Thx a lot. log: [ 6.150364] mount_root: mounting /dev/root [ 6.160809] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended [ 6.167627] EXT4-fs (sda2): re-mounted. Opts: (null) [ 6.185524] mount_root: loading kmods fr...

x86 gargoyle boot from usbdisk error gargoyle_1.9.1-x86-geode-combined-jffs2-128k.img log: [ 5.721698] block2mtd: error: cannot open device PARTUUID=71e002f1-02 [ 5.734979] rtc_cmos rtc_cmos: setting system clock to 2016-07-08 04:37:49 UTC (1467952669) [ 5.741018] Waiting for root device /dev/mtdblo...

plugin email send tester reports an error. Sun Mar 6 00:41:21 2016 user.err msmtp: host=smtp.yyy.com tls=off auth=on user=fengchen_bbb@yyy.com from=fengchen_bbb@yyy.com fengchen_aaa@xxx.com recipients=fengchen_aaa@xxx.com smtpstatus=500 smtpmsg='500 Error: bad syntax' errormsg='envelope from address...

Lantis wrote:I don't understand why the wan port would just change config unless the firmware was corrupt or something else bizarre.

Something like this post http://www.gargoyle-router.com/phpbb/vi ... =11&t=8356.
I know the modem ip is also 192.168.1.1.

Lantis wrote:Regardless, whichever version you are on now, did you get there by preserving settings?

I don't know how to restore the factory settings, but it seems to be invalid on the web page.
I did not restore the previous settings

Lantis wrote:That sounds like a case of attempting to preserve settings?

No,that is being after power up again.