Gargoyle Forum

first bug found. I flashed my wdr3600 and under TCP Timeout it was set to 7440 Yep just saw that one of the patches didn't get added back in. Not sure if intentional or not. 02_sane_sysctl_defaults.patch If you want to change it, the value that patch uses is 600 and the max connections is 4096. Hi ...

I am trying to "Restore default configuration" but all it dos it reboots the TP-Link TL-WDR3600 v1.5 router and no changes are made.

Is there another way of restoring back to gargoyles default configuration?

There is one way for PCs/Laptops both Linux/Windows/Mac's but means all Video calls and Voice Calls :o No idea about other devices :roll: Skype > Options > Advanced > Connections Use 45532 for incoming connections Untick UPnP This would use TCP/UDP port 45532 source from you PC/Laptop example 192.16...

Unplug the WAN port from gargoyle router to the verizon homefusion router and reset the "Verizon HomeFusion router" back to factory default. On the gargoyle router only leave your PC/Laptop on LAN port 1 dont plug in your WAN port to the Verizon HomeFusion router yet! Login into Gargoyle -...

Go to Connection > Basic DHCP Start 1 end 252 bitatone modem bitatone doing DHCP and 740 too that will result in double NAT Not if the TP-Link/Gargoyle router was on 10.0.0.0/8 subnet and bitatone beening on the 192.168.1.0/24 is two separate networks :) so basicly TP-Link/Gargoyle Router = Clients...

When i had a YouView box i had to port forward 1024 and 8081 TCP to the Youview box. IGMP Proxy cant remember from the top of my head but i know is a microsoft DHCP route and enabled snooping but was on an ASUS router. You would need a router with a 8Mb flash or more, 4MB flash might not do the job....

Try this :) On the TP-Link Router Go to Connection > Basic Go to Local Network / LAN (bottom) Change Router IP: 10.0.0.254 Subnet Mask: 255.255.255.0 DNS Servers: Default DNS Servers Then Go to Connection > Basic DHCP Start 1 end 252 Save changes, Wait 10 minutes then reboot your Modem and Router. Y...

TP-LINK TL-WDR3600 v.1.5, Gargoyle 1.8.0 LAN to WAN, all ports been used but just the Xbox One and my PC rest are idle/Turned off but shows a green light. 4 android device again not been used. Also has QoS both Download and Upload. 53 Mb download 3 Mb upload ^^^ This is my ISP max speed i can grab f...

I can also confirm that i got about 22mb from LAN to WAN with a linksys wrt54gs v4, CPU is about 240 MHz, Ok for an ISDN ADSL 1 2 line been under 24mb/1.3mb, To reach 24Mb on an ADSL2 line is so lucky to be that close to the exchange point

Hello I have a D-Link DIR-615 D2 and is OpenWRT 12.09 (Had alot of bugs), 14.07 and 15.05 compatible so my question is can ths router be comptable with gargoyle? Even though is a 4MB flash chip, and also mediatek/ralink ramips? 15.05.1 http://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/rt305x/...