Gargoyle Forum

For any one with similar problem , a week ago I have reverted to Gargoyle 1.10.0 and tested the printer but the router didn't find the printer same as version 1.11.0 , Just bought A new Archer C7 V5 flashed it with gargoyle 1.11.0 , The router recognized the printer from the first second . So now fo...

Your config isn't supported in the GUI. You want to use wireless bridge mode, and then manually set up the 5ghz wireless at the command line. Just done it , it was so damn easy that I still don't believe that I have done it with that ease , just saved the 5Gh configuration part before switching to ...

Your config isn't supported in the GUI. You want to use wireless bridge mode, and then manually set up the 5ghz wireless at the command line. thanks for pointing me to the right direction , I will start reading and trying , I think I may success as I am playing at the root/etc/config/wireless for d...

When it comes to speed, don't expect miracles - Over 2.4 GHz it's not going fast, depending on a lot of factors (Ambient interference, Channels 20/40/(80), distance, CPU load). the 2.4GH speed is 450 Mbs for both routers , so I could get an actual Wifi speed up to 130 Mbs between the two router whe...

If you have Archer C7 V5 in BRIDGE mode, no Archer statistics work - Gargoyle doesn't allow it, WAN interface is needed and bridge WAN doesn't exist - WAN is disable or linked to bridge. So if you want the Archer to function as a monitor, it must be in GATEWAY mode, otherwise it can't be. I just wa...

I bought An Archer C7 V5 , flashed it with gargoyle 1.11.0 , I wanted to use it as Wireless AP + Wireless bridge for my main router WR1043 running gargoyle 1.11.0 , while using the DHCP/NAT only for the WR1043 router so that the WR1043 router can see the ip address of devices connected at the Archer...

Did you install the upnp plugin when using 1.11.0? yes I installed it but didn't work although I have tested it only in ( Double NAT + DMZ at modem ) as this configuration is working at gargoyle 1.8.1 for the last 3 years at my old WR841ND V9 , for 1.10.0 it's also working but in (Modem bridge + PP...

I used to connect my modem and Router in double NAT (with DMZ enabled at the modem) and Gargoyle router upnp worked with no problem at the past . But for my new TP-WR1043 V2.1 it didn't work with gargoyle 1.11.0 , searched and found that there is no workaround for now , so reverted to gargoyle 1.10....

So I got my first result. Thanks alot RomanHK for your testing and confirming that the last gargoyle version 1.11.X indeed doesn't work with the printer , may be it will be fixed at the next stable version or I hope so , for now i will attach the printer to the pc and use google print service for a...

I'm sorry, I missed the "HP Smart Install" :oops: . The driver does not look like this, the connection is cycling, and I suspected the creation of a virtual CD-ROM. Try replacing the USB cable with a short one. There may be a problem with the power or frequency between the USB port and th...