Gargoyle Forum

1.14 seems broken on WNDR3700v1. Factory img gets into bootloop, sysupgrade works but telling the storage is full, cant reset to solve this issue, any fix for v1? Unfortunately images for some of the 8MB flash routers get past the size checks in the build process but when these images are installed...

OpenWrt has iperf3 in it's package collection; you should be able to install it with opkg. I know. I wrote iperf3 app meaning a phone app, something that acts as an iperf3 server. Oops, sorry, my bad. However, as I recall running the iperf3 server on OpenWrt (or on your laptop connected to OpenWrt ...

It would be interesting to test the speed between openwrt and the phone but I don't know if there's an iperf3 app that I can use. OpenWrt has iperf3 in it's package collection; you should be able to install it with opkg. It isn't built for Gargoyle releases but as it only depends on libc it is like...

But in the connection manager of my laptop the connection speed is 144,4 Mbit/s At least your laptop is connecting at 802.11n rates so that removes that potential limit - 11n should be good for 80-90 Mb/s down. If you feel up to testing OpenWrt 22.03.6 (most recent point release of 22.03) that migh...

iwlist scan: Cell 02 - Address: 74:83:C2:12:F7:5B Channel:12 Frequency:2.467 GHz (Channel 12) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"myWifi" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s That suggests that your 2.4GHz is only configured...

- what does your laptop report about both the phone and router connections? I can connect to the phone using the 5GHz band. I can connect to the router using the 2.4GHz band, the 5GHz band is not available/visible (no SSID). Can't you get any details about the connection (e.g. signal level, SNR, &q...

There's some info you didn't give which would be helpful: - what band, channel and bandwidth is your phone hotspot on? - what band, channel and bandwidth is your router's WAN set to? - what band, channel and bandwidth is the WiFi LAN set to? - what does your laptop report about both the phone and ro...

You might like to review the Fibre connections VLAN thread, though at this stage I don't think any final conclusions have been reached. According to this article (which is contemporaneous with OpenWrt 19.07 as used by Gargoyle 1.13), my understanding would be that you should set up the PPPoE connect...

I've just been able to flash that image to my R6220 without drama, including preserving my config, so the image appears to be fine. It has been a while since I upgraded this unit to 1.14 so I don't recall exactly how it played out but I was definitely aware of the DSA transition and expecting the up...

I have an R6220 in service at the moment with a personal build of 1.14 without problems. Did you try and keep the configuration? I ask because the MT7621 sub-target had a major change to how the ethernet switch is managed at 1.14 (known in OpenWrt as the transition from "swconfig" to "...