Search found 247 matches

by tals
Fri Nov 13, 2015 6:22 pm
Forum: General Discussion
Topic: Best Router for Gargoyle
Replies: 10
Views: 8140

Re: Best Router for Gargoyle

Just keep in mind 5GHz will always be poor compared to 2.4GHz. Higher frequency spectrum is weaker at range and penetration (assuming same transmit power). In an unrelated note, this also happens in mobile networks. Mobile networks that own and use lower frequency spectrum 700-900MHz have a huge ad...
by tals
Fri Nov 13, 2015 10:00 am
Forum: General Discussion
Topic: Best Router for Gargoyle
Replies: 10
Views: 8140

Best Router for Gargoyle

Hi I currently have a Netgear 3700 v2 which is ok but I do wonder if it is lagging behind particularly on wifi performance. 5Ghz seems very poor though that maybe a Gargoyle issue. Wifi is ok but as pretty much the whole house is wifi (Now TV/Chromecasts/Pcs etc) are all on What is considered to be ...
by tals
Sun May 10, 2015 7:44 am
Forum: Monitoring / Quota / QoS Issues
Topic: (Random?) Wipe of Quota Settings
Replies: 15
Views: 13996

Re: (Random?) Wipe of Quota Settings

Agreed :cry:
by tals
Sun May 10, 2015 5:10 am
Forum: Monitoring / Quota / QoS Issues
Topic: (Random?) Wipe of Quota Settings
Replies: 15
Views: 13996

Re: (Random?) Wipe of Quota Settings

When I had some strange issues a while back it was caused by preserving the settings when I updated the firmware, is that the case for you. If so would suggest a firmware update (same version. don't preserve the settings to see if that resolves)
by tals
Sat May 09, 2015 8:59 pm
Forum: Hardware / Installation Issues
Topic: 1.6.2/1.71/x Settings not holding on power off
Replies: 8
Views: 6390

Re: 1.6.2/1.71/x Settings not holding on power off

Tbh when I started this exercise I thought that was what I was looking at and that could still be the case but this wasn't a one off. I went to those builds multiple times and at the end I even got to the scenario that worked eg 1.70 to 1.71 then flashed clean 1.71 to lose (just to prove the scenari...
by tals
Sat May 09, 2015 9:14 am
Forum: Hardware / Installation Issues
Topic: 1.6.2/1.71/x Settings not holding on power off
Replies: 8
Views: 6390

Re: 1.6.2/1.71/x Settings not holding on power off

I've had no settings loss on wndr3800 with 1.6.2, 1.7.0, 1.7.1 or any of the 1.7.X with PPPoE Hi Lantis, just to confirm you went to 1.62 or 1.71 with the preserve settings unticked ie you had to reenter the settings from scratch and afterwards if you turned off the router the settings were retaine...
by tals
Sat May 09, 2015 8:20 am
Forum: Hardware / Installation Issues
Topic: 1.6.2/1.71/x Settings not holding on power off
Replies: 8
Views: 6390

Re: 1.6.2/1.71/x Settings not holding on power off

Hi Ispy Steps I did: Update to Firmware 1.7.1 - not preserve settings Enter ppoe - wired Login and password (previously I had entered wireless etc but this is not necessary) Save Settings Check internet working. Power off router - leave for 10 seconds - power on router and wait for green light on ro...
by tals
Sat May 09, 2015 7:48 am
Forum: News
Topic: Version 1.7.1 - Guest Network Support
Replies: 152
Views: 314649

Re: Version 1.7.1 - Guest Network Support

Further to my previous posts I have done some extensive testing today and believe Gargoyle has an issue with firmwares 1.62 and 1.71/x If you go to these firmwares without previously preserving the settings, put the settings in then save the settings when the router is powered off it does not retain...
by tals
Sat May 09, 2015 7:45 am
Forum: Hardware / Installation Issues
Topic: 1.6.2/1.71/x Settings not holding on power off
Replies: 8
Views: 6390

1.6.2/1.71/x Settings not holding on power off

Tested on a Netgear 3700 v2 Firmwares 1.6.2 and 1.71 (and 1.7x) If you update to these firmwares (not preserving settings), enter the settings - test internet is working and then power off the router the router loses its settings If you are on 1.6.0/1.61 or 1.7.0 and update to the above firmwares wi...
by tals
Wed May 06, 2015 4:11 am
Forum: News
Topic: Version 1.7.1 - Guest Network Support
Replies: 152
Views: 314649

Re: Version 1.7.1 - Guest Network Support

Is their a problem with WiFi using 5ghz. Got a netgear 3700v2, upgraded to 1.71 thought I would try 5ghz and on a speediest I barely hit 1mb, on 2.4 I get 11 mb (I know that's about all I get here :() Hi one thing you could try is flash back to latest OEM firmware and then flash back to 1.7.1 It's ...