Gargoyle Forum

No worries Peter. You'll need command line access to the router so that you can initiate the download and install onto the router. I recommend using PuTTY.exe for Windows or Terminal.app for Mac/Linux Login as root using your password. wget -O /tmp/install.sh http://lantisproject.com/gargoyle_mvebu/...

I recommend using the version available from here: http://dl.eko.one.pl/gargoyle-pl/attitude_adjustment/ar71xx/ It has the required modules to make this work. Note that you will then need to install an English (or whichever you prefer) translation pack on top. the default is Polish. Or make sure you...

No idea sorry mate.
Possibly best to ask at the openwrt forums at this stage

When you flash it automatically flashes the secondary flash. The router then boots into it.
The next time you flash it will also go to the alternative flash (the original primary).

So to get the same version on both, you need to flash twice in a row with the same image.

If it did get back to the GUI for you, the best bet is to reflash the firmware to get it all happy again, then restore your backup

Sounds like it's halfway between fail safe and broken lol.
Did you try the default password "password"

failsafe you should be able to just spam one of the buttons after you turn the device on until it enters the fail safe mode.

It takes a little while. Maybe 30 seconds.

Are you sure fail safe isn't working?
I've put my device into a completely unusable state and recovered it using fail safe.
I had a completely incompatible network config like your situation.

Try the power off power on 4 times method. It should switch to backup flash.

Details of router?

I've never experienced this.