Gargoyle Forum

You don't really need to have a different subnet for the bridge, so use the same and see if it works.

Lantis wrote: Please show a screenshot?
Are you using 40MHz?
If so, this is entirely expected.

2,4 GHz and 40 MHz
I cannot use channel 1-4, I can select only from 5 to 14

WNDR 3700 from 1.9.1 to 1.9.2 preserving setting EDIT: the router reboots endless after 20/30 seconds. I was able to factory reset it doing it veeeeeeeery fast before it rebooted again. After the factory reset via web interface, I made the same configuration as before and it seems it works as before.

Fonflash sends a "fis init" command to delete the flash, but it is not a full wipe. Telnet or ssh the redboot and send "fis init -f" so it will make a real full wipe. Now turn off your fonera and then try again with fonflash, it should work again. I was using the 1.4.7 (more free...

basically it is just a "plugin" that run a server. The server is able to share a dslr camera connected to the router with a usb cable. Then you can connect to the wifi and control the dslr camera with a client. You don't need to configure anything on the server. I bought an ar71xx router t...

Thanks for your reply and explanation :) Meanwhile I found and installed this: http://wifi.ozo.com/airo/openwrt/packages/uclibc-0.9.31/gcc-4.4.3/ar71xx/uclibcxx_0.2.2-2_ar71xx.ipk Then I tried the ddserver and it was installed too. Nothing changed on the gui (pretty obviously). Do you think there is...

my mistake, I had to write openwrt... this plugin is for openwrt. I edit the message

Hello, I found that OpenWRT (so Gargoyle too) for router with AR71XX should be compatible with this: http://dslrdashboard.info/ It makes possible to control a DSLR Camera wireless hooking the usb cable from the camera to the router. The package is an opkg: http://dslrdashboard.info/download/ddserver...

I fixed the 300 Mbps issue. For future reference I had to change one settings: Ad Hoc Qos mode: WMM enabled Then pay attention if there is not traffic the wifi link is set to 150 Mbps and if you start to move data it goes up to 240-270 Mbps. Waiting for a help with the channels and tx trasmit power...

Hi, I bought an used wndr3700v1 and I installed Gargoyle 1.5.9 I have some doubts for the wifi: - I cannot reach 300 Mbps, only 150 Mbps - it is limited to 1-10 channel (not even the 11 channel); - it is limited to 17dBm trasmission power. I double checked it is selected 40MHz both router and wifi c...