Gargoyle Forum

I have just acquired a WZR-HP-G300NH, and also have a WRT54GL (currently running 1.3.9, after experiencing some problems with 1.3.10) My question is: Can I have both routers on the same subnet? I would like to increase the number of wired connections from 4 if I use either router alone, to 7 or 8 if...

thanks. At the time problems occurred, I could not access the internet with firefox, and pinging the ip address of the gateway gave an error message about destination being unreachable (I don't recall the exact message). As I recall it was about halfway through a 24 hour lease, so it appears that th...

It's still happening. I had the 1/1/1970 date showing again yesterday. So here are the log files you suggested. I accept what you say about an intermittent hardware problem, but I am struggling to understand why it only occurs with 1.3.10 .... I've downgraded back to 1.3.9 for a while, just to check...

Problem not as solved as I had hoped :( At about 12 hours after last WAN lease renew, I noticed WAN access was down. basic.sh page showed lease time/date of 12MN 1970/1/1 + time zone offset. * "renew lease now" clicked --> update time/date to 24hrs post click time, but NO WAN access. * com...

With the WAN DHCP renewal apparently working as long as I left the timezone at GMT and the date format at mm/dd/yy, I decided to try putting the rest of my settings in (fixed ip addresses, quotas, time restrictions for some ip ranges etc) and the router has been working perfectly since. Interestingl...

Thanks pbix, After your report of problem free installation, I tried again. * reinstalled 1.3.10 * restored my backed up configuration (the one I built manually after finding out about the incompatibility of wireless settings between 1.3.9 and 1.3.10, that had worked at least for a while) * tried yo...

Additional info: I'm using a WRT54GL, and this problem is driving me nuts. I haven't found a reproducible way of getting the router to acquire a new WAN ip lease. Various combinations of power-cycling router and cable modem with ethernet cable connected/disconnected have sometimes worked, but not ev...

I had problems getting 1.3.10 to work with new firmware, but solved most after manually reentering settings from 1.3.9. I still have a problem though, because the WAN ip address does not seem to automatically get renewed, so I lose the WAN connection periodically. If I click the "renew lease&qu...

I had the same trouble - no wireless after upgrade from 1.3.9 to 1.3.10 I found the same solution - reapply all settings manually. It's working now, but I also have another issue. About once per 24 hours I lose WAN ip address and therefore internet access. I think at least once I have seen an issue ...

I have a WRT54GL running Gargoyle Version:1.3.5 On the Connected Hosts page, this entry is always present. Hosts With Active Connections Hostname Host IP Host MAC (unknown) 10.72.0.1 unknown I gather that 10.72.0.1 is an internal address used by the router? Why does this show up on the Connected Hos...