Gargoyle Forum

dd-wrt --> gargoyle see here credit to Gingernut just need to change the part after wget to current (1.3.12) firmware http://www.gargoyle-router.com/downloads/images/ar71xx/gargoyle_1.3.12-ar71xx-wzr-hp-g300nh-squashfs-sysupgrade.bin gargoyle --> stock firmware see thread here credit DoesItMatter so...

My problem has been (mostly) solved, but probably not in ways that are generally applicable to others, so I just let this thread die ...

If you are offering help, my thanks, but see above!

If you have a similar problem, I'm not sure what your question is ...

Ian

Disclaimer: I have no direct knowledge of this particular router! but since no-one else seems to be offering info .... OpenWRT wiki referred to by DoesItMatter suggests that your router should be recoverable by tftp see here the method I use is described here perhaps someone with more detailed knowl...

@DoesItMatter I noticed from your sig that you have upgraded to 1.3.12 on your wzr-hp-g300nh .... What method did you use to upgrade? from 1.3.11? I have been holding off from upgrading my wzr-hp-g300nh from 1.3.10, (which has been stable for me, but seems to have a minor issue with restriction rule...

Have you tried with a switch or spare router between ubuntu box and router? I've configured Ubuntu to connect with these settings: IP: 192.168.1.5 Netmask: 255.255.255.0 Gateway: 192.168.1.1 DNS: 192.168.1.1 If you set a static address for the ubuntu box as above (192.168.1.5), you can use arp to se...

So much for that idea then! :D I would suggest the sysupgrade method to flash then, since that is what I used. PM me if you need help with that. I have also successfully flashed this model with tftp. I used an old router I had lying around as a switch to keep the link up with router turned off. Othe...

hi, I have the same router but 1.3.10 and 1.3.11 doesn't work with wireless. I could see two types of drop down for wireless channels which is 5g and after you enable wireless the normal 2.4 channel list appears . However, both are empty and the wireless is not broadcasting. How come you could use ...

Just wondering if it would be possible to redirect user's browser to a (customizable?) gargoyle page informing them that the website is not accessible because of a restriction rule ... ? Something like what happens if quota is exceeded, --> browser shows gargolye login page with red message that 100...

@pbix: I think I may have found the source of the strange date 1/1/1970 seen on my router. I have since discovered that my motorola cable modem has a (limited) browser-accessed setup page. Looking at the logs, the modem appears to lose current time after a power cycle, and takes about 5 minutes to r...

Just wondering, has there been a change in the way restrictions work in 1.3.10 and 1.3.11, as compared to previous versions? I have a few rules set under restrictions to restrict ip ranges and one MAC address (no internet access after bedtime kids!). These have worked well in previous Gargoyle versi...