Gargoyle Forum

However, as I recall running the iperf3 server on OpenWrt (or on your laptop connected to OpenWrt if you wanted to test the chain) with an iperf3 client on the phone you should still be able to get a reasonable guide to performance in both directions as the server can be both data source and/or sin...

pythonic wrote: ↑

Sat Feb 03, 2024 8:01 am

OpenWrt has iperf3 in it's package collection; you should be able to install it with opkg.

I know. I wrote iperf3 app meaning a phone app, something that acts as an iperf3 server.

If you feel up to testing OpenWrt 22.03.6 (most recent point release of 22.03) that might give an indication whether the changes I mentioned earlier were backported. I don't expect any official Gargoyle 1.14 builds with these updates to be made, as I understand the available resources are focussed ...

Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s I restored Gargoyle and the settings I had before and radio0 was set to 802.11g+n The bit rates listed by iwlist wlan0 scan are the same. But in the connection manager of my laptop the connection speed is 144,4 Mbit/s I d...

That suggests that your 2.4GHz is only configured for 802.11g (54 Mb/s) standard whereas the hardware is supposed to support 802.11n (150 Mb/s??). That is likely to limit you to about 33 Mb/s download, which I see you were getting closer to with OpenWrt 21.02. I don' t know, I don' t remember setti...

I tested the speed between my laptop and Openwrt 23.05 with iperf3 and the results are: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 368 MBytes 309 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 366 MBytes 307 Mbits/sec receiver Anyway always around 300Mbps... Watching a Youtube video, to check ...

It would also be useful to sysupgrade back to OpenWrt and check the performance of the router running OpenWrt (both 22.03 as used by Gargoyle 1.14 and 23.05, possibly even 21.02). With 21.02 I got: laptop -> (wired) openwrt -> phone TTL = 65 Download = 16Mbps, upload = 1.5Mbps Download = 20Mbps, up...

Can't you get any details about the connection (e.g. signal level, SNR, "sync rate" etc) from your laptop OS? iwlist scan: Cell 02 - Address: 74:83:C2:12:F7:5B Channel:12 Frequency:2.467 GHz (Channel 12) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"myWifi" Bit Rat...

There's some info you didn't give which would be helpful: - what band, channel and bandwidth is your phone hotspot on? On the phone I can only set the band: 5GHz - what band, channel and bandwidth is your router's WAN set to? 5GHz, channel 36, 80MHz - what band, channel and bandwidth is the WiFi LA...

Not sure If I can ask here or in a new thread. I made some speed test using librespeed.org from my laptop and from my phone hotspot (that I use as WAN for Gargoyle). The results are not what I was expecting. Phone ping = 46 ms jitter = 12 ms download = 39 Mbps upload = 3 Mbps laptop -> gargoyle -> p...