Gargoyle Forum

Do we still need to compile a version or does the current version support an up-to-date enough OpenWRT?
If so, which image should be used for flashing this device?

You might be getting a bit confused here. You shouldn't be using dynamic DNS for what you're trying to achieve.
Dynamic DNS is a tool that allows you to set your WAN IP to a hostname, eg myhome.dyndns.org so you can access it from away from home/office.

I've made no WAN changes during this testing so not sure what it got the 43ms from originally.

1ms is accurate, I'm on a wireless connection, and the gateway I connect to is just across town.

Go to Status > Bandwidth usage.

Down bottom under Bandwidth Usage Table change Display Interval to something like days, then you'll be able to see total usage per day etc.

You're right, that far too low.

What host does it actually ping?

thats working! root@router:/tmp# cat qosmon.status State: FREE Link limit: 1000 (kbps) Fair Link limit: 900 (kbps) Link load: 867 (kbps) Ping: off Filtered ping: 0 (ms) Ping time limit: 1 (ms) Classes Active: 1 ID FFFF, Active 0, Backlog 0, BW bps (filtered): 0 ID 8015, Active 0, Backlog 0, BW bps (...

After reboot: Idle: State: WAIT Link limit: 863 (kbps) Fair Link limit: 863 (kbps) Link load: 0 (kbps) Ping: off Filtered ping: 0 (ms) Ping time limit: 0 (ms) ID FFFF, Active , Backlog , BW bps (filtered): 0.00 nbytes: 0, xbytes: 14353318963229834060, work: 14353318963229834060 ID 8004, Active , Bac...

No trouble. I noticed I couldn't disable the " Enable active congestions control (Download Direction) " as when I unticked the checkbox and hit save changes it automatically ticked itself again. Idle: root@router:/# cat /tmp/qosmon.status State: WAIT Link limit: 900 (kbps) Fair Link limit:...

Only default QOS classes as downlink, Skype, Voip and BT. I assume anything not manually specified falls into the default service class "fast"? Noone else using WAN. There was no change to QOS status during the download. Hit the ISP limit of just under 1mbit (speed showni nload). It didn't...

Running this on my alix. My connection I'm testing this on: Max downstream (offpeak) 1mbit Max downstream (onpeak) burst to 1mbit, limited to 500kbit about 30 seconds after a large download is activated. Max upstream 400-500kbit. At idle the status is: Congestion Control Status State: WAIT Link limi...