Gargoyle Forum

Some updates for my router - since last reconfiguration with disabling ANI and other known tips and tricks there is no any serious crashes with WiFi.

Problem with error "ath: phy0: Failed to stop TX DMA" at TL-WR1043ND v.1 also isn't resolved - there is same errors after update to 2014-July-28 version, but as I see it can be expected in hight traffic time and low traffic times : [94400.070000] ath: phy0: Failed to stop TX DMA, queues=0x...

Updated to this version, strange warning (never listed in dmesg before): [81287.980000] ------------[ cut here ]------------ [81287.980000] WARNING: at /home/user/gargoyle/ar71xx-src/build_dir/linux-ar71xx_generic/compat-wireless-2014-05-22/net/mac80211/rx.c:3372 0x80e1f210() [81288.000000] Rate mar...

No, last 1.6.1 installed about 2 month ago, no any upgrades after it. Only new scripts added. This problem fixed after reboot, I'm investigating now. By the way - there is old problem with "ath: phy0: Failed to stop TX DMA, queues=", I'm investigating this problem too.

Hi all! At least last 3 days there is some strange problem with scheduled wifi on - state - it's turning off by schedule correctly, but isn't turning on after it. There is records in system log like "wlan0 turning on" and "wlan0 goes to the disabled state" after it. Also there is...

Hello all! Question about switch control - does anyboby have any information about swconfig dev rtl8366rb led control modes? There is only general information about at openwrt site, I'm interesting in detailed led mode information - there is 15 modes listed, but there is no descripton about this mod...

I think you can change DD-WRT to Gargoyle only through reverting to stock version from DD-WRT with Webrevert firmware. My question was more about the version of gargoyle to flash to each router, what are the recommended versions for a V1.8 and V1.10? I read about the different revisions of my route...

I think you can change DD-WRT to Gargoyle only through reverting to stock version from DD-WRT with Webrevert firmware.

These settings are controlled on the DHCP server side so unless you have control of the DHCP server you are stuck. The client can request a lease time but the server gets to decide what the lease time will be. Sure, solved, as described in "RFC 2131 Dynamic Host Configuration Protocol" Li...

It does not work, settings like config dhcp 'wan' option interface 'wan' option ignore '1' option default-lease-time '1800' option max-lease-time '86400' not applicable. As I see in logs router's dhcp client renewal time is the same as default 15 mins: Nov 20 12:50:56 TL-WR1043ND daemon.notice netif...