Gargoyle Forum

Bridging still fails semi-catastrophically, as described here: http://www.gargoyle-router.com/phpbb/viewtopic.php?f=6&t=176 And, I still get nothing in my connected hosts list, even though there's 3 systems connected to the router. UPDATE: After my upgrade, I have discovered that bridging does n...

The failsafe should revert back to the previous settings once the bridge becomes operational again. It should be transparent, so if the bridge goes down, the router still works, and if the bridge comes back up, the bridge should begin working again. Barring that, it ought to be abundantly clear to t...

I think I've pinned down a critical weakness in the way Gargoyle handles bridging. If the system that the Gargoyle router is bridging to goes down, or the connection is lost for other reasons, like bad weather, then the Gargoyle router can no longer be reached via it's IP address. It appears that on...

For reference, I seem to have had an identical problem that I posted before finding the solution in this post. I posted it here: http://www.gargoyle-router.com/phpbb/viewtopic.php?f=6&t=176 I also included some details, and some questions, all of which should help anyone else with the same probl...

OK, I don't really understand what went wrong, but I found this post: http://www.gargoyle-router.com/phpbb/viewtopic.php?f=6&t=90 I suspected I may have the same problem since my router's IP is 192.168.1.1 and the router I'm bridging to has the IP 192.168.0.1 so while plugged in with a wired con...

OK, I setup a bridge, and now I can't access gargoyle. I tried resetting the router with the reset button on the back of the WRT54GS, but nothing happened, except now the bridge doesn't work anymore. My router, and the router I'm bridging to, all have different IP addresses. 192.168.1.1 and 192.168....

The fields were still empty even after fresh reboots of several computers. I have several of them without monitors, keyboards, or mice attached. I access those computers using TightVNC, but I need to know their IP first, and having them show up in the router's list is the best way I can think of to ...

The fields are empty for connected hosts, DHCP leases, etc, on my WRT54G, even when I've got a couple of PC's connected to it.