Gargoyle Forum

Finally reset it successfully. Thanks for all your helps.
I really like gargoyle. It's much more stable than ddwrt i used previously.

I tried the failsafe method by pressing the qss button. The setting led flashed rapidly but then I was not able to ping or telnet to it. How were you connected to the router? Did you set your computer to have a static ip of 192.168.1.2? I doubt that your router is bricked. If the router is generati...

I've create a new topic on this in the troubleshooting section. Please help out. Thanks a lot.
http://www.gargoyle-router.com/phpbb/vi ... f=8&t=3295

I flashed the router from openwrt to gargoyle 1.5.7. It worked. Out of no reason, I later did the 30/30/30 reset without knowing this method is not workable for gargoyle. Now, I'm stuck in the login page. It say invalid password. I tried the failsafe method by pressing the qss button. The setting le...

U232 P9 with prolink 2303HX. I use the 2nd, 3rd & 5th pins for rx, tx & ground. Shouldn't it work? I will try to solder the wire on the board and give it another shot. It's using USB, so I suppose it around 5v. I set the speed to 115200 and others as in the guide. Try 57600 for serial speed...

ispyisail wrote:

U232 P9 with prolink 2303HX

Im not sure that one will work? (only a quick look)

http://wiki.openwrt.org/doc/hardware/port.serial

But I now wasn't able to get any readings at the tx. Is the board spoilt?
I still can see the login page on the browser though and ping in normal condition.

U232 P9 with prolink 2303HX. I use the 2nd, 3rd & 5th pins for rx, tx & ground. Shouldn't it work? I will try to solder the wire on the board and give it another shot.

It's using USB, so I suppose it around 5v. I set the speed to 115200 and others as in the guide.

i tried using the RS232 serial cable, connect the tx pin to rx pin and vice versa. Launched putty with serial mode but what i got are a bunch of weird characters.

I upgraded my wr841nd v7.2 from openwrt to gargoyle 1.5.7.
It worked but i did the 30/30/30 reset and now the password becomes invalid. Any way through? Urgent. Thanks.