Search found 4 matches

by bobcov
Tue Nov 12, 2019 7:05 am
Forum: Network / Wireless Issues
Topic: How to setup 2 Wi-Fi networks with LAN-to-LAN connected routers?
Replies: 28
Views: 22852

Re: How to setup 2 Wi-Fi networks with LAN-to-LAN connected routers?

Thank you for replying, Lantis. But it still doesn't work. Now, at Router 2, I've disabled "Connect Via" and set the LAN IP address to 192.168.1.2 (same subnet as Router 1). The cable is already connected at a LAN port on Router 1 and a LAN port on Router 2. DHCP disabled on Router 2. Wi-...
by bobcov
Mon Oct 14, 2019 4:39 am
Forum: Hardware / Installation Issues
Topic: Using Gargoyle Router as Ethernet Switch and Wireless Extender
Replies: 12
Views: 13221

Re: Using Gargoyle Router as Ethernet Switch and Wireless Extender

Solution: DD-WRT on an old Buffalo WHR-HP-G54. Exact same configuration, but it works. Upstream router in the WAN port bridged to the Ethernet ports, TV box in an Ethernet port. All devices, wired and wireless, working fine...except for the fact that this is an ancient router with only B/G wireless.
by bobcov
Mon Oct 14, 2019 2:51 am
Forum: Hardware / Installation Issues
Topic: Using Gargoyle Router as Ethernet Switch and Wireless Extender
Replies: 12
Views: 13221

Re: Using Gargoyle Router as Ethernet Switch and Wireless Extender

Couldn't find a way to update my post with following: Just discovered the WR1043ND 1.8 (running 1.8 Gargoyle, too) will not auto-negotiate with 100 meg devices. No link light. I put my laptop on, got a 1g connection, released and renewed, got an IP address yet I cannot ping the gateway or even the r...
by bobcov
Sun Oct 13, 2019 6:34 pm
Forum: Hardware / Installation Issues
Topic: Using Gargoyle Router as Ethernet Switch and Wireless Extender
Replies: 12
Views: 13221

Re: Using Gargoyle Router as Ethernet Switch and Wireless Extender

I finally got the router configured so that I could log back into it after setting it up per the screenshots above - but I still can't get connected to the internet via the ethernet port. What was strange to me was that I could see the router on the network using an IP scanner (Fing) but it couldn'...