Gargoyle Forum

Found a serial cable, here is the ouput, looks like the flashing process is corrupt. After a cold boot checksum fails. You can see me here flashing it then on line 380 power cycling: PS - summited the ticket on github, probably easier to track bugs there? https://pastebin.com/fPAtD3TJ shippet: U-Boo...

Another thread would be best. A log of before you restart it (logread, dmesg, df -h) are all useful. A log of when it is in the failed state is probably the most telling, is it not accessible over SSH even in this state? What if you set a manual IP address. If you can get it into failsafe mode, som...

Runs 1.12.x without noticeable issues. Upon loading 1.13.x router boots up, but after a power cycle fails to come up. Cant SSH into it either. Here are the logs from 1.13.x: https://pastebin.com/5TxUmxst 1.12.x working for comparison: https://pastebin.com/NiXnMgZ1 above has dmesg, logread, df-h Do g...

That sounds like the symptoms of a full flash chip, but hard to know without logs. Unfortunately, unless someone shows what the problem is, its unlikely to get fixed before 1.13 release. So if you have the inclination to go back and try it and provide more information, that would be great. Otherwis...

https://openwrt.org/docs/techref/targets/ath79 Worth reading the ar71xx to ath79 upgrade guide while you are there Thanks. Attempted to install the 1.13.x (ath79 build), installs ok, works too, but once the router is powered off then powered back on its non responsive. Have to do factory reset via ...

Then you should be using ath79 (the successor to ar71xx). You cannot preserve settings moving to or from those builds due to a significant architecture change. Thanks for clarification. Is there documentation somewhere what ar71xx to ath79 transition means? Is this move to a new kernel? Or what was...

https://gargoyle.romanhk.cz/1.12.x/1.12.0.x%20gargoyle-ispy%202020-June-10%2000/ Someone has graciously hosted images there. The general Forum is here https://www.gargoyle-router.com/phpbb/viewforum.php?f=14 Thank you, but it appeears that builds for my particular router are missing. Its a MyNet N7...

https://gargoyle.romanhk.cz/1.12.x/1.12.0.x%20gargoyle-ispy%202020-June-10%2000/ Someone has graciously hosted images there. The general Forum is here https://www.gargoyle-router.com/phpbb/viewforum.php?f=14 Thank you, but it appeears that builds for my particular router are missing. Its a MyNet N7...

Seems like turning off DHCP doesnt always stick. Uncheck, save, says its not enabled. Check a few days later, its enabled again. Running latest 1.12.0 The latest versions of 1.12.x (from the community section) and 1.13.x have had this issue resolved since 2019. Sorry, how do I get the community sec...

|----------------------------------------------------------------| | Gargoyle version 1.12.0 | OpenWrt 18.06 branch | | Gargoyle revision d8b3cc58| OpenWrt commit 5e4533c | | Built December 01, 2019 | Target ar71xx/usb_large | ------------------------------------------------------------------ After ...