Gargoyle Forum

https://openwrt.org/toh/hwdata/8devices/8devices_jalapeno Curious if there is a target generic supported for this device? It was built with openwrt in mind. I'd like to run the 1.13 test builds on this device to see how it goes, and I just do not have a very powerful machine to build for a target de...

I have an Atomic Pi I would like to test this on, it uses UEFI for boot though, are any of the x86 builds ok for UEFI? You will probably have to do the UEFI boot yourself (then let me know if you succeeded): https://forum.openwrt.org/t/how-to-install-18-06-0-to-a-uefi-only-x86-64-system/18125/8 or ...

I have an Atomic Pi I would like to test this on, it uses UEFI for boot though, are any of the x86 builds ok for UEFI?

Per a discusssion on forum.openwrt.org software flow offloading does seem to work with cake, obviously this is not the same as qosmon on gargoyle but it does work. I am using it so far on a wrt1900ac v1 with cake and it works just fine. Hardware offloading seems to work on only the a specific soc wh...

REMOVED

I am actually having this same issue. I am on a 1900ac v1 with a 2.4ghz and 5ghz network my guest network is 2.4ghz only and I can get an IP address but no DNS resolution. I use a pi-hole with DNSCrypt v2 for DNS and have this setup through my /etc/config/dhcp with option 6. All other devices that a...

I edited the server.conf file via cmd to push "dhcp-option DNS 192.168.2.254" which is the IP of my pi. I have confirmed this does in fact work within my pi logs while conntected over VPN.

I updated my subnet and everything is working now.

I also updated the server.conf to point DNS to my Pi Hole so now while on the move we are getting FTLDNS with DOH

Reading now. Thanks guys!

https://s22.postimg.cc/alb3bcmz5/openvpn.jpg

Here is a screenshot of what my potential settings were before the crash.

EDIT: Looking back my guess is because I set the ip to 192.168.2.1 which is my router IP I need to change that to whatever IP I want within my subnet?