X-fta dongle does not reset
Posted: Sat Dec 11, 2010 3:02 am
x-FTA Dongle does not reset and you cannot access the router with the 192.168.1.1.
Do you know of any solutions?
Do you know of any solutions?
Gargoyle Forum
A forum to discuss the Gargoyle web interface for Openwrt
https://www.gargoyle-router.com/phpbb/
X-fta dongle does not reset
Page 1 of 3
Re: X-fta dongle does not reset
Posted: Sat Jan 01, 2011 7:08 pm
I got the same issued How can I re set ? I try to log in but can't not let me get in to re set back..Please Need help very bad..How to re setting this X-fta dongle
Re: X-fta dongle does not reset
Posted: Sat Jan 08, 2011 3:53 am
Can somebody here help and respond to this issued . I need help how do i bring this Dongle back to Factory default.. X-FTA DONGLE
Re: X-fta dongle does not reset
Posted: Sat Jan 08, 2011 11:44 am
http://ftabeta.com/viewsat-discussions/ ... ongle.html
See that.
The reset button may not work.
You might have to recover via serial console or jtag
I don't think this is even available in the USA.
It looks like these are really touchy / flaky units
Might have to RMA the thing if you can't reset/recover.
See that.
The reset button may not work.
You might have to recover via serial console or jtag
I don't think this is even available in the USA.
It looks like these are really touchy / flaky units
Might have to RMA the thing if you can't reset/recover.
Re: X-fta dongle does not reset
Posted: Thu Jan 20, 2011 10:09 pm
Can anyone make a dump of their xfta if its working? Thanks
Re: X-fta dongle does not reset
Posted: Wed Jul 20, 2011 11:52 am
Has anyone figured out how to reset these? I think I have bricked and need to unbrick it.
Re: X-fta dongle does not reset
Posted: Sat Jul 23, 2011 10:03 am
This is what you have to do to reset the router.
1 hold the reset button for 40s then wait for 2mins.
2 After 2mins unplug the router then plug it back in.
3 Wait 3mins then connect the cat five cable to a lan port to you pc type 192.168.1.1 and you should be in.
1 hold the reset button for 40s then wait for 2mins.
2 After 2mins unplug the router then plug it back in.
3 Wait 3mins then connect the cat five cable to a lan port to you pc type 192.168.1.1 and you should be in.
Re: X-fta dongle does not reset
Posted: Sun Aug 14, 2011 12:53 pm
when i thought my x-fta was bricked what i did was the 30/30/30. thats 1 min with reset being pushed with power, holding reset remove power and wait 1min, then holding reset pot power back on and hold reset 1 min. it took 2 or 3 times but did return to working.
Re: X-fta dongle does not reset
Posted: Thu Aug 25, 2011 11:42 am
same problem here... can´t access the router. tryed everything you suggest guys. i think the next step is the jtag. does anyone knows how to do it?
Re: X-fta dongle does not reset
Posted: Wed Aug 31, 2011 8:39 am
here ismy problem, i can log in to gargoyke software make my password but when i do the connection set up scan for my wifi, put in the pass word for it, i hit save and thats as far as i get it will not save and i loose the page, then i have to reset the x-fta dongle , buy pushing the button on the back and try again, tried it on my i mac and my windows 7 laptop any other way to propgame this other than the lan line???????????????