Please assist: Route forwarding from Wan router network
Posted: Thu Jul 28, 2016 5:00 am
Good day
Could anyone please assist me with this problem: I have a 3G Router that is my internet connection. It also connects to a network hub where there is a printer connected. This is a printer / scanner, and when all computers were connected to the original 3G router, they could all scan from the printer to the computers.
I have a Gargoyle router set up as AP+Client. It's WAN address is 192.168.1.2. The printer's address is 192.168.1.5. On the Gargoyle LAN side, the IP address of the device I wish to scan to (Protocol FTP) is 192.16.14.19.
Essentially I wish to allow traffic from 192.168.1.5 to go to 192.16.4.19 - actually all computers on the 192.16.4.x addresses.
How do I set up this port forwarding on the Gargoyle router? Traffic from the computers connected to the Gargoyle router have internet access and can print to the printer, so the outgoing routes are fine.
Many thanks
Ian
Could anyone please assist me with this problem: I have a 3G Router that is my internet connection. It also connects to a network hub where there is a printer connected. This is a printer / scanner, and when all computers were connected to the original 3G router, they could all scan from the printer to the computers.
I have a Gargoyle router set up as AP+Client. It's WAN address is 192.168.1.2. The printer's address is 192.168.1.5. On the Gargoyle LAN side, the IP address of the device I wish to scan to (Protocol FTP) is 192.16.14.19.
Essentially I wish to allow traffic from 192.168.1.5 to go to 192.16.4.19 - actually all computers on the 192.16.4.x addresses.
How do I set up this port forwarding on the Gargoyle router? Traffic from the computers connected to the Gargoyle router have internet access and can print to the printer, so the outgoing routes are fine.
Many thanks
Ian