Odd but repeatable wifi bridge 5ghz bug

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
fraze
Posts: 1
Joined: Tue Oct 13, 2015 5:48 pm

Odd but repeatable wifi bridge 5ghz bug

Post by fraze »

Hi guys, I signed up just to report this lovely little bug.

The setup: wireless bridge between two routers (in this case both WNDR3800) on stock Gargoyle 1.8.0, the "OUTER" router is plugged directly to cable internet and doesn't matter much. The INNER router is bridged over wifi and uses all 5 ethernet ports, WAN port is bridged to the other 4.

On the INNER router all plugged-in hosts can communicate between each other if the wireless bridge to OUTER is 802.11g and WDS. If the wireless bridge is Client Bridge and on 802.11a then everybody can connect to internet but it's like isolation mode is enabled for the host on INNER's WAN port, it simply can't see anything else on the local network.

So if you're not using the WAN port on your remote and Client Bridge on 802.11a then you'll never see this problem. Happy to provide more details if anybody needs 'em.

varma
Posts: 37
Joined: Thu Feb 17, 2011 7:53 pm

Re: Odd but repeatable wifi bridge 5ghz bug

Post by varma »

I had a similar problem with my WR1043ND with 1.7.2
when LAN and WAN were bridged together (eg. access point utilization)
the two "sub-sections" couldn't reach each other

it looks like a real bug, i hope somebody will look at it

I couldn't solve it, only bypass avoiding the use of WAN port
http://www.gargoyle-router.com/phpbb/vi ... =11&t=7622
Tp-Link WR1043ND v1.4 using Gargoyle 1.7.2
Tp-Link WDR3600 v1.5 using OpenWRT CC by SamKnows

Image

Post Reply