Gargoyle Forum

Hi,

at my TPLINK WR1043ND i have the problem that the OpenVPN Server is not in running state after first configuration (see in the Attachement)
The OpenVPN Server Port is set to Default Port 1194 not like in this screenshot.
Can you help me to troubelshoot this Problem?

Thanks

eric usually likes another person to confirm the same problem then it usually get esculated as a confirmed bug

ispyisail wrote:eric usually likes another person to confirm the same problem then it usually get esculated as a confirmed bug

Thank you

I can confirm that this is a problem with 1.7.0 and 1.7.1

Okay. I seemed to have found a workaround. I have problems if I refresh with the new rom and then immediately reload my old config, but it seems to work if I refresh the rom, then start up the openvpn server to generate new keys, and then load in my old configuration.

The bug seems to be that loading in a backup file doesn't seem to set the bit that tells the system that keys have been generated for openvpn.

Hi it's not a good thing to load a old backup file from 1.62 in to 1.71

Hi,
For my first look and testing OpenVpn works now fine on TPLink-1043ND and firmware 1.7.1.
But after the first router restart the router isn't responsible again like in the firmware versions before. I had to go in failsafe mode again to launch "firstboot".

Thanks for your help!

I am having the same problem with TPLINK WRD-3600 on 1.8.0 firmware.
Can not connect. Please let me know if there is a solution. Thank you.

When I look at the log file I see a line that says:
Options errors: You must define TUN/TAP device (--dev)

Can anyone tell me what this means and how to fix it?

brianm1962 wrote:When I look at the log file I see a line that says:
Options errors: You must define TUN/TAP device (--dev)

Are you able to login to your Gargoyle router using ssh and post the output of