Gargoyle Forum

USE AT YOUR OWN RISK

I did a rebuild so hopefully the patches were added

* bump openwrt backfire version
* remove full path from ca,cert,key and update status file path in a similar manner too
* when setting openvpn certificate expiration time, contend with the 2038 bug, so that we get the maximum expiration time possible

http://goo.gl/e4XfR

still wait you reply pm, but I will test your new FW anyway

http://www.gargoyle-router.com/wiki/dok ... ertorouter

I've made it a hurry

please help me fix any errors

ispyisail wrote:http://www.gargoyle-router.com/wiki/dok ... ertorouter

I've made it a hurry

please help me fix any errors

read UDPv4: Connection reset by peer ( WSAECONNRESET) (code=10054)

ispyisail THANKSSSSSSSSSSSSSSSSSSSSSSSS IT FULLLY WORK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

what was the problem?

ispyisail wrote:what was the problem?

First of all, thanks for your effort. I have tested succesfully but during the test I found this FW very unstable, made router "dead" all the time. I have use failsafe model to "firstboot" the router, I thank must be something wrong with FW. I test on TL-WR1043ND V1.8, network
diagram same as http://www.gargoyle-router.com/wiki/lib ... router.png but changer firewall to ADSL2 Router.

if in doubt use Eric's official builds

ispyisail wrote:if in doubt use Eric's official builds

what should i do? back to stock FW first? than flash your FW?

I would just go straight to Eric's official build