Gargoyle Forum

I'm a little confused by the previous posts does 1.5.8 of Gargoyle include 3G support in the firmware? Or does anything else need to be done to get 3G? From the forums it says 3G support has been fixed.

The link from Trex is now for 1.5.8.4, but can I just install it from this site (on a TP-MR3220) and not have to deal with changing the Polish to English?

Thanks

Gargoyle has built in support for 3G modems when loaded on routers with USB capability and at least 8MB of flash. The TL-3220 only has 4MB of flash so there is no 3G support in that image.

I strongly encourage all people who want to use Gargoyle to only purchase routers with at least 8MB of flash and 32MB of RAM. The cost delta is not significant and the performance and frustration reduction is huge.

I'm using 1.5.11.1 build (r38462) and 3G works on TL-MR3020 !!!
http://ecco.selfip.net/gargoyle-pl/atti ... actory.bin
Now I just need some help to get it translated, I've tried Trex instructions, but could not get it work.
Even if it's low on flash memory, 3g works fine if you can guess the polish settings

No it won’t work. You need to get the firmware for 3420 from the T-P link site separately. New firmware does not work on old ones. That is how it works for ever device. I hope this helps you. Best Kindergarten in Mabelah

savinandi wrote:No it won’t work. You need to get the firmware for 3420 from the T-P link site separately. New firmware does not work on old ones. That is how it works for ever device. I hope this helps you.

It worked all the weekend when I used it, Gargoyle 1.5.11.1 in Polish, but 3G works flawleesly, I just need help to get it into english

Would also love to see an gargoyle 1.5.11.1 on my MR3220 v2 in english. Gave the polish build a try and it worked flawlessly, however not speaking polish it was a hit an miss using google translate.

Hi!

i have gargoyle 1.9 installed in my Mr3220 V2
There is any way to use 3G modem ?

I tried to install the plugin USB STORAGE tha t apparently does not pre-installed in that firmwire but when i tried to install it it shoes me that i don't have space on disk.

I know that router have 32MbRam so i don't know why i can't install it.

If someone can help me i appreciate.



Thanks!

Things don't get installed into RAM they get installed into flash.
You don't have enough room.

To get 3G support you'll need to use an older, customised version from http://dl.eko.one.pl/gargoyle-pl/attitu ... nt/ar71xx/

Hi @Cezary ,

I got the MR3220 V2.4 and I've installed the old version with USB support, but it does not see my USB stick. I have the Vodafone Hungary ZTE 4607-Z . Can you please help out ?