Page 5 of 5
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
Posted: Wed Apr 10, 2024 2:10 am
by angus
Lantis wrote: āSat Apr 06, 2024 6:36 am
Fantastic.
Did you change any of the default settings? You must have set your SSID at a minimum I think?
I did set the same SSID to 2.4G and 5G. Besides, fast roaming is enabled. Nothing's more.
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
Posted: Wed Apr 10, 2024 2:13 am
by angus
I also notice there is a
band_steering_threshold does not take effect unless load_balancing_threshold is also set to a value greater than 0. in the usteer page.
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
Posted: Mon May 13, 2024 4:46 am
by whataboutnow
VLAN required by ISP
Happy to see this build being released
can i just check please - my isp requires that I add a vlan ID to my connection details, is that supported in this build?
Many thanks
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
Posted: Mon May 13, 2024 5:36 am
by Lantis
whataboutnow wrote: āMon May 13, 2024 4:46 am
VLAN required by ISP
Happy to see this build being released
can i just check please - my isp requires that I add a vlan ID to my connection details, is that supported in this build?
Many thanks
What device do you have?
I finished writing basic WAN side VLAN support last night and need a Guinea pig
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
Posted: Fri May 17, 2024 7:42 am
by whataboutnow
hiya sorry for the delay,
I have a wrt3200acm
Happy to do a couple of hours guinea pig over the weekend.
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
Posted: Fri May 17, 2024 10:03 pm
by Lantis
whataboutnow wrote: āFri May 17, 2024 7:42 am
hiya sorry for the delay,
I have a wrt3200acm
Happy to do a couple of hours guinea pig over the weekend.
I'm compiling a new version for you now. I'll post it in a few hours
EDIT: Available here
https://lantisproject.com/gargoyle_cust ... lds/mvebu/
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
Posted: Mon May 27, 2024 4:16 pm
by marcinkk
Redmi AX6000 is not supported by Gargoyle 1.15, but it is supported by OpenWrt 23.05.
So I've made the following steps:
- I've cloned gargoyle from github
- I switched to
base_on_openwrt_2305 branch
- I've addedd to
targets/mediatek/profiles/filogic/config:
Code: Select all
CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_xiaomi_redmi-router-ax6000-stock=y
CONFIG_TARGET_DEVICE_PACKAGES_mediatek_filogic_DEVICE_xiaomi_redmi-router-ax6000-stock="gargoyle-large"
- I've addedd to
targets/mediatek/profiles/filogic/profile_images:
Then I've run compilation with:
And as a result I have:
gargoyle_1.15.x-mediatek-filogic-xiaomi_redmi-router-ax6000-stock-squashfs-sysupgrade.bin
What is a chance that my AX6000 will run proprely after sysupgrade to this image? It currently has OpenWrt SNAPSHOT installed.
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
Posted: Mon May 27, 2024 6:08 pm
by Lantis
High chance. Sysupgrade without preserving settings.
If it works Iād be happy to add the device (as you have)
