Feature request Enable/Disable services
Moderator: Moderators
Feature request Enable/Disable services
I have seen a request from a user and gave me an idea .
http://www.gargoyle-router.com/phpbb/vi ... f=5&t=1712
It could be interesting to have a page to enable or disable services running on the device.
Like bandwith monitor,quotas,etc, this way the low memory devices could have some extra free memory.
http://www.gargoyle-router.com/phpbb/vi ... f=5&t=1712
It could be interesting to have a page to enable or disable services running on the device.
Like bandwith monitor,quotas,etc, this way the low memory devices could have some extra free memory.
WIFI Link @ 76 km
http://youtu.be/rrXanzlro78
http://youtu.be/rrXanzlro78
-
- Posts: 20
- Joined: Thu Feb 11, 2010 4:50 am
Re: Feature request Enable/Disable services
that would be a great and very usefull option
Re: Feature request Enable/Disable services
Already exists. See: http://openrouter.info/forum/viewtopic.php?f=22&t=541
Simplified version (without system services) you can install by:
opkg install http://ecco.selfip.net/backfire/ar71xx/ ... -1_all.ipk
(gui in polish!)
Simplified version (without system services) you can install by:
opkg install http://ecco.selfip.net/backfire/ar71xx/ ... -1_all.ipk
(gui in polish!)
-
- Posts: 20
- Joined: Thu Feb 11, 2010 4:50 am
Re: Feature request Enable/Disable services
would be great to have it in english
Re: Feature request Enable/Disable services
repack in english
http://www.4shared.com/get/xpq7XmIa/plu ... -1_al.html
copy to tmp folder then run
from putty then run
It should be loaded up in GUI
http://www.4shared.com/get/xpq7XmIa/plu ... -1_al.html
copy to tmp folder then run
Code: Select all
opkg update
opkg install /tmp/plugin-gargoyle-initd_1.5.x-1_all.ipk
from putty then run
Code: Select all
/etc/init.d/initd enable
/etc/init.d/initd start
- Attachments
-
- Service List.jpg (243.01 KiB) Viewed 17510 times
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Feature request Enable/Disable services
behappy,behappy wrote:repack in english
http://www.4shared.com/get/xpq7XmIa/plu ... -1_al.html
copy to tmp folder then runCode: Select all
opkg update opkg install /tmp/plugin-gargoyle-initd_1.5.x-1_all.ipk
from putty then runIt should be loaded up in GUICode: Select all
/etc/init.d/initd enable /etc/init.d/initd start
Is there some other package or addon that may be required?
I followed everything above, step by step, but when I try to
access the "Service" link - I get the following error:
500 Internal Error
Something unexpected went wrong running a CGI program.
httpd_gargoyle/1.0 14mar2008
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Feature request Enable/Disable services
I install it on the straight gargoyle fw.
The service-ipk does reserv the system number 310, check yr \etc\config\gargoyle file if you have installed something else.
gargoyle.system.initd='310'
config '400' 'system'
option 'access' '100'
option 'ident' '200'
option 'time' '300'
option 'backup' '400'
option 'update' '500'
option 'reboot' '600'
option 'about' '1000'
option 'themes' '311'
I'm at work, dont have access to my router.
If not it works for you then install the package as cybero2912 wrote.
Extract my repacked package by 7z (... data.tar.gz\data.tar), in there it should be to folders; etc & www. Overwrite the routers folder with those upon.
\etc\init.d\initd
\www\js\initd.js
\www\initd.sh
run \etc\init.d\initd enable
run \etc\init.d\initd start
reboot
The file initd.js defines what you want to show which services in GUI. You can change showing more or less services editing the parameter
var blockedServices = ['gargoyle_themes','initd','boot','create_original_backup','cron','ddns_gargoyle','defconfig','dnsmasq','done','dropbear','firewall','ftp','httpd_gargoyle','led',
'miniupnpd','network','nfsd','ntpclient','portmap','qos_gargoyle','rcS',
'set_kernel_timezone','sysctl','telnet','umount','usb','usb_storage','watchdog',
'webmon_gargoyle','wol'];
The service-ipk does reserv the system number 310, check yr \etc\config\gargoyle file if you have installed something else.
gargoyle.system.initd='310'
config '400' 'system'
option 'access' '100'
option 'ident' '200'
option 'time' '300'
option 'backup' '400'
option 'update' '500'
option 'reboot' '600'
option 'about' '1000'
option 'themes' '311'
I'm at work, dont have access to my router.
If not it works for you then install the package as cybero2912 wrote.
Extract my repacked package by 7z (... data.tar.gz\data.tar), in there it should be to folders; etc & www. Overwrite the routers folder with those upon.
\etc\init.d\initd
\www\js\initd.js
\www\initd.sh
run \etc\init.d\initd enable
run \etc\init.d\initd start
reboot
The file initd.js defines what you want to show which services in GUI. You can change showing more or less services editing the parameter
var blockedServices = ['gargoyle_themes','initd','boot','create_original_backup','cron','ddns_gargoyle','defconfig','dnsmasq','done','dropbear','firewall','ftp','httpd_gargoyle','led',
'miniupnpd','network','nfsd','ntpclient','portmap','qos_gargoyle','rcS',
'set_kernel_timezone','sysctl','telnet','umount','usb','usb_storage','watchdog',
'webmon_gargoyle','wol'];
Re: Feature request Enable/Disable services
to NOT show. This is blacklist, prevent disable "system" service.
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Feature request Enable/Disable services
OK - working now - looks good!behappy wrote:I install it on the straight gargoyle fw.
The service-ipk does reserv the system number 310, check yr \etc\config\gargoyle file if you have installed something else.
gargoyle.system.initd='310'
config '400' 'system'
option 'access' '100'
option 'ident' '200'
option 'time' '300'
option 'backup' '400'
option 'update' '500'
option 'reboot' '600'
option 'about' '1000'
option 'themes' '311'
I'm at work, dont have access to my router.
If not it works for you then install the package as cybero2912 wrote.
Extract my repacked package by 7z (... data.tar.gz\data.tar), in there it should be to folders; etc & www. Overwrite the routers folder with those upon.
\etc\init.d\initd
\www\js\initd.js
\www\initd.sh
run \etc\init.d\initd enable
run \etc\init.d\initd start
reboot
The file initd.js defines what you want to show which services in GUI. You can change showing more or less services editing the parameter
var blockedServices = ['gargoyle_themes','initd','boot','create_original_backup','cron','ddns_gargoyle','defconfig','dnsmasq','done','dropbear','firewall','ftp','httpd_gargoyle','led',
'miniupnpd','network','nfsd','ntpclient','portmap','qos_gargoyle','rcS',
'set_kernel_timezone','sysctl','telnet','umount','usb','usb_storage','watchdog',
'webmon_gargoyle','wol'];
Not sure why it didn't work the first time.
Very cool feature this is - hopefully something Eric will add in later.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
- Posts: 20
- Joined: Thu Feb 11, 2010 4:50 am
Re: Feature request Enable/Disable services
I have the same problem like "DoesItMatter" but I am not able to fix it
fresh installed gargoyle 1.5.0
followed the instrctions step by step
500 Internal Error
Something unexpected went wrong running a CGI program.
@DoesItMatter what have you done to get it work ?
edit: same error on 1.4.2
fresh installed gargoyle 1.5.0
followed the instrctions step by step
500 Internal Error
Something unexpected went wrong running a CGI program.
@DoesItMatter what have you done to get it work ?
edit: same error on 1.4.2