Barrier Breaker Progress
Moderator: Moderators
Re: Barrier Breaker Progress
Gargoyle 1.7 Uptime: 1 days, 1 hours, 29 minutes
No problem, good work!
No problem, good work!
>>>>> Doky <<<<<
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)
Re: Barrier Breaker Progress
No bin for 841nd v5?ispyisail wrote:Code: Select all
------------------------------------------------------------------ | _____ _ | | | __ \ | | | | | | \/ __ _ _ __ __ _ ___ _ _| | ___ | | | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ | | | |_\ \ (_| | | | (_| | (_) | |_| | | __/ | | \____/\__,_|_| \__, |\___/ \__, |_|\___| | | __/ | __/ | | | |___/ |___/ | | | |----------------------------------------------------------------| | Gargoyle version 1.7.X | OpenWrt Barrier Breaker branch | | Gargoyle revision 9b4e0d7 | OpenWrt revision r43166 | | Built December 07, 2014 | Target ar71xx/default | ------------------------------------------------------------------ root@Gargoyle:~#
Router test: wr841nd v5
-
- Posts: 2
- Joined: Mon Dec 08, 2014 12:06 pm
Re: Barrier Breaker Progress
Feeback / Tested: WNDR3800ispyisail wrote:Update
http://goo.gl/W9UzMF
gargoyle_1.7.x-ar71xx-generic-wndr3800-squashfs-factory.imgCode: Select all
make FULL_BUILD=true ar71xx
gargoyle_1.7.x-ar71xx-generic-wndr3800-squashfs-sysupgrade.bin
Upgraded via web interface from:
gargoyle_1.6.2-ar71xx-generic-wndr3800-squashfs-factory.img
TO:
gargoyle_1.7.x-ar71xx-generic-wndr3800-squashfs-sysupgrade.bin
-Was able to SSH, and use the web management.
-Unable to turn on the 2.4ghz or 5ghz WiFi.
Was able to successfully revert via web interface to:
gargoyle_1.6.2-ar71xx-generic-wndr3800-squashfs-sysupgrade.img.
-
- Posts: 44
- Joined: Mon Jan 27, 2014 5:28 pm
- Location: Bukarest
Re: Barrier Breaker Progress
tapper wrote:Is that meen Transmit Power? mine says 30 dBmvladtheodor wrote:Anyone see that "iw reg set BO" is (global limit) decreased from 30dBm to 20dBm ? Changed back to US...
Yeap. Transmit power. Any alternate 20+ dBm country !?
TP-Link TL-WR1043ND v1
Re: Barrier Breaker Progress
I'm using buffalo G450H.
I install 1.7.x from openwrt,but couldn't finish the router's inital setup.
after finish the pppoe connection and wifi setting,I can't connect the router via lan or wifi.I have to pull off the power cable and turn it on again, then the router works.....
But every time I log in the router via web gui,it still show's the init setup page(ask me to change password witch I already did,and chose language).
I install 1.7.x from openwrt,but couldn't finish the router's inital setup.
after finish the pppoe connection and wifi setting,I can't connect the router via lan or wifi.I have to pull off the power cable and turn it on again, then the router works.....
But every time I log in the router via web gui,it still show's the init setup page(ask me to change password witch I already did,and chose language).
Re: Barrier Breaker Progress
Try failsafe reset (factory reset)megaslx wrote:I'm using buffalo G450H.
I install 1.7.x from openwrt,but couldn't finish the router's inital setup.
after finish the pppoe connection and wifi setting,I can't connect the router via lan or wifi.I have to pull off the power cable and turn it on again, then the router works.....
But every time I log in the router via web gui,it still show's the init setup page(ask me to change password witch I already did,and chose language).
Re: Barrier Breaker Progress
Thanks ispyisail ! Good, but don't have plugin?
Device Name: Gargoyle
Gargoyle Version: 1.7.X (Built 20141206-2344 git@9b4e0d7)
Model: TP-Link TL-WR741N/ND v4
Device Configuration: Gateway
Memory Usage: 14.1MB / 28.2MB (50.1%)
Connections: 160/4096
CPU Load Averages: 0.24 / 0.19 / 0.08 (1/5/15 minutes)
Uptime: 0 days, 0 hours, 2 minutes
Current Date & Time: 12/09/14 3:32 AM UTC+7
Device Name: Gargoyle
Gargoyle Version: 1.7.X (Built 20141206-2344 git@9b4e0d7)
Model: TP-Link TL-WR741N/ND v4
Device Configuration: Gateway
Memory Usage: 14.1MB / 28.2MB (50.1%)
Connections: 160/4096
CPU Load Averages: 0.24 / 0.19 / 0.08 (1/5/15 minutes)
Uptime: 0 days, 0 hours, 2 minutes
Current Date & Time: 12/09/14 3:32 AM UTC+7
root@Gargoyle:~#
BusyBox v1.22.1 (2014-12-07 15:02:17 NZDT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
------------------------------------------------------------------
| _____ _ |
| | __ \ | | |
| | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
| | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
| | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
| \____/\__,_|_| \__, |\___/ \__, |_|\___| |
| __/ | __/ | |
| |___/ |___/ |
| |
|----------------------------------------------------------------|
| Gargoyle version 1.7.X | OpenWrt Barrier Breaker branch |
| Gargoyle revision 9b4e0d7 | OpenWrt revision r43166 |
| Built December 07, 2014 | Target ar71xx/default |
------------------------------------------------------------------
root@(none):~#
Re: Barrier Breaker Progress
I find another problem.ispyisail wrote:Try failsafe reset (factory reset)megaslx wrote:I'm using buffalo G450H.
I install 1.7.x from openwrt,but couldn't finish the router's inital setup.
after finish the pppoe connection and wifi setting,I can't connect the router via lan or wifi.I have to pull off the power cable and turn it on again, then the router works.....
But every time I log in the router via web gui,it still show's the init setup page(ask me to change password witch I already did,and chose language).
utorrent cann't connect to any seeds or peers.....
I've already enabled the upnp setting.
-
- Posts: 44
- Joined: Mon Jan 27, 2014 5:28 pm
- Location: Bukarest
Re: Barrier Breaker Progress
O.K. - found a good country regulatory database here :
http://wireless.kernel.org/en/developer ... y/Database
Working for me Taiwan and Belize. Power back to 24 dBm.
http://wireless.kernel.org/en/developer ... y/Database
Working for me Taiwan and Belize. Power back to 24 dBm.
TP-Link TL-WR1043ND v1
Re: Barrier Breaker Progress
Hi, I got these error message when I tried to build the code cloned from github "bb" branch:
I tried on both Arch Linux and Ubuntu 14.04.
Code: Select all
configure: WARNING: unrecognized options: --disable-nls, --disable-ipv6
configure: loading site script /home/tock/桌面/gargoyle/ar71xx-src/include/site/mips-openwrt-linux-uclibc
checking build system type... x86_64-pc-linux-gnu
checking host system type... mips-openwrt-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for mips-openwrt-linux-strip... mips-openwrt-linux-uclibc-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a pax tar archive... gnutar
checking for grep that handles long lines and -e... /home/tock/桌面/gargoyle/ar71xx-src/staging_dir/host/bin/grep
configure: error: The kernel source directory /home/tock/桌面/gargoyle/ar71xx-src/build_dir/target-mips_34kc_uClibc-0.9.33.2/linux-ar71xx_generic/linux-3.10.49 is not patched with netlink.patch to support ipset
make[4]: *** [/home/tock/桌面/gargoyle/ar71xx-src/build_dir/target-mips_34kc_uClibc-0.9.33.2/linux-ar71xx_generic/ipset-6.11/.configured_] Error 1
make[4]: Leaving directory `/home/tock/桌面/gargoyle/ar71xx-src/package/ipset'
make[3]: *** [package/ipset/compile] Error 2
make[3]: Leaving directory `/home/tock/桌面/gargoyle/ar71xx-src'
make[2]: *** [/home/tock/桌面/gargoyle/ar71xx-src/staging_dir/target-mips_34kc_uClibc-0.9.33.2/stamp/.package_compile] Error 2
make[2]: Leaving directory `/home/tock/桌面/gargoyle/ar71xx-src'
make[1]: *** [world] Error 2
make[1]: Leaving directory `/home/tock/桌面/gargoyle/ar71xx-src'