Gargoyle on Nanopi R2S

[BENROFU]

Hello
I cant manage to install. ?!
Not sure whats wrong but here is what i have tested.

gargoyle_1.15.x-rockchip-armv8-friendlyarm_nanopi-r2s-squashfs-sysupgrade.img.gz

extracted this file on microsd card with etcher. no sucess starting up. no lights in leds for LAN. Do not get any IP on computer. Tried to set ip also, but no ping on 192.168.1.1

openwrt 22.03.3 installed ok with no problem..

[BENROFU]

Here is log from serial terminal:

Code: Select all

▒
U-Boot TPL 2021.07-OpenWrt-r19160+882-7ea2f3d6e2 (Jan 22 2023 - 00:35:16)
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.07-OpenWrt-r19160+882-7ea2f3d6e2 (Jan 22 2023 - 00:35:16 +0000)
Trying to boot from MMC1
NOTICE:  BL31: v2.3():v2.3
NOTICE:  BL31: Built : 15:56:43, Apr 20 2020
NOTICE:  BL31:Rockchip release version: v1.2


U-Boot 2021.07-OpenWrt-r19160+882-7ea2f3d6e2 (Jan 22 2023 - 00:35:16 +0000) Open                                                                                        Wrt

Model: FriendlyElec NanoPi R2S
DRAM:  1022 MiB
PMIC:  RK8050 (on=0x40, off=0x00)
MMC:   mmc@ff500000: 1
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: FriendlyElec NanoPi R2S
Net:   eth0: ethernet@ff540000
Hit any key to stop autoboot:  0
MMC Device 0 not found
no mmc device at slot 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
352 bytes read in 3 ms (114.3 KiB/s)
## Executing script at 00500000
36620 bytes read in 6 ms (5.8 MiB/s)
14501896 bytes read in 640 ms (21.6 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=3090000
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Device Tree to 000000003df25000, end 000000003df30f0b ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.161 (michael@michael-NUC8i7BEH) (aarch64-openw                                                                                        rt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19160+882-7ea2f3d6e2) 11.2.0, GNU ld (GNU                                                                                         Binutils) 2.37) #0 SMP PREEMPT Sun Jan 22 00:35:16 2023
[    0.000000] Machine model: FriendlyElec NanoPi R2S
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] cma: Reserved 8 MiB at 0x000000003f400000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 21 pages/cpu s45784 r8192 d32040 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 257544
[    0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio                                                                                        32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes,                                                                                         linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, li                                                                                        near)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1002864K/1046528K available (7870K kernel code, 2322K rwd                                                                                        ata, 2264K rodata, 1664K init, 708K bss, 35472K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif                                                                                        fies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:                                                                                         0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980                                                                                        46511097ns
[    0.001395] Console: colour dummy device 80x25
[    0.001858] Calibrating delay loop (skipped), value calculated using timer fr                                                                                        equency.. 48.00 BogoMIPS (lpj=240000)
[    0.002805] pid_max: default: 32768 minimum: 301
[    0.003447] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, line                                                                                        ar)
[    0.004128] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes,                                                                                         linear)
[    0.006801] rcu: Hierarchical SRCU implementation.
[    0.007469] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE                                                                                         build
[    0.009129] smp: Bringing up secondary CPUs ...
[    0.010222] Detected VIPT I-cache on CPU1
[    0.010327] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.011060] Detected VIPT I-cache on CPU2
[    0.011129] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.011849] Detected VIPT I-cache on CPU3
[    0.011913] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.012035] smp: Brought up 1 node, 4 CPUs
[    0.015259] SMP: Total of 4 processors activated.
[    0.015693] CPU features: detected: 32-bit EL0 Support
[    0.016164] CPU features: detected: CRC32 instructions
[    0.016970] CPU: All CPU(s) started at EL2
[    0.017366] alternatives: patching kernel code
[    0.028138] KASLR disabled due to lack of seed
[    0.028896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                        x_idle_ns: 19112604462750000 ns
[    0.029803] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.031004] pinctrl core: initialized pinctrl subsystem
[    0.032944] NET: Registered protocol family 16
[    0.036237] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.037370] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allo                                                                                        cations
[    0.038296] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic al                                                                                        locations
[    0.040069] thermal_sys: Registered thermal governor 'step_wise'
[    0.040078] thermal_sys: Registered thermal governor 'power_allocator'
[    0.041004] cpuidle: using governor menu
[    0.042069] ASID allocator initialised with 65536 entries
[    0.042730] Serial: AMBA PL011 UART driver
[    0.073086] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.073713] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.074324] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.074933] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.077451] cryptd: max_cpu_qlen set to 1000
[    0.079608] reg-fixed-voltage sdmmc-regulator: Failed to register regulator:                                                                                         -517
[    0.081573] iommu: Default domain type: Translated
[    0.083195] SCSI subsystem initialized
[    0.083813] usbcore: registered new interface driver usbfs
[    0.084361] usbcore: registered new interface driver hub
[    0.084892] usbcore: registered new device driver usb
[    0.087346] clocksource: Switched to clocksource arch_sys_counter
[    0.088139] VFS: Disk quotas dquot_6.6.0
[    0.088589] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.094536] NET: Registered protocol family 2
[    0.095202] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line                                                                                        ar)
[    0.097267] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192                                                                                         bytes, linear)
[    0.098106] TCP established hash table entries: 8192 (order: 4, 65536 bytes,                                                                                         linear)
[    0.098918] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear                                                                                        )
[    0.099760] TCP: Hash tables configured (established 8192 bind 8192)
[    0.100584] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.101229] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.102169] NET: Registered protocol family 1
[    0.102611] PCI: CLS 0 bytes, default 64
[    0.108038] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[    0.115793] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.116344] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_                                                                                        PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.119314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                        52)
[    0.119999] io scheduler mq-deadline registered
[    0.127048] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[    0.127735] dma-pl330 ff1f0000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num                                                                                        _Peri-20 Num_Events-16
[    0.131249] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.133521] printk: console [ttyS2] disabled
[    0.134012] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 20, base_baud =                                                                                         1500000) is a 16550A
[    0.134938] printk: console [ttyS2] enabled
[    0.134938] printk: console [ttyS2] enabled
[    0.135688] printk: bootconsole [uart8250] disabled
[    0.135688] printk: bootconsole [uart8250] disabled
[    0.144988] loop: module loaded
[    0.145293] mtip32xx Version 1.3.1
[    0.149662] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[    0.150268] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[    0.150988] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    0.151558] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available y                                                                                        et, deferred probing
[    0.155520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.156111] ehci-platform: EHCI generic platform driver
[    0.159033] ehci-platform ff5c0000.usb: EHCI Host Controller
[    0.159568] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus                                                                                         number 1
[    0.160412] ehci-platform ff5c0000.usb: irq 36, io mem 0xff5c0000
[    0.197312] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[    0.198533] hub 1-0:1.0: USB hub found
[    0.198903] hub 1-0:1.0: 1 port detected
[    0.199937] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.200526] ohci-platform: OHCI generic platform driver
[    0.201457] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[    0.202072] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus                                                                                         number 2
[    0.202967] ohci-platform ff5d0000.usb: irq 37, io mem 0xff5d0000
[    0.271979] hub 2-0:1.0: USB hub found
[    0.272358] hub 2-0:1.0: 1 port detected
[    0.273888] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.274413] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu                                                                                        mber 3
[    0.275297] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110                                                                                         quirks 0x0000000002010010
[    0.276206] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xff600000
[    0.277643] hub 3-0:1.0: USB hub found
[    0.278017] hub 3-0:1.0: 1 port detected
[    0.278767] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.279271] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu                                                                                        mber 4
[    0.279964] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    0.280606] usb usb4: We don't know the algorithms for LPM for this host, dis                                                                                        abling LPM.
[    0.281837] hub 4-0:1.0: USB hub found
[    0.282206] hub 4-0:1.0: 1 port detected
[    0.283104] usbcore: registered new interface driver usb-storage
[    0.283821] i2c /dev entries driver
[    0.287639] rk808 1-0018: chip id: 0x8050
[    0.295312] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    0.295901] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    0.298293] vdd_log: supplied by vdd_5v
[    0.300746] vdd_arm: supplied by vdd_5v
[    0.301352] vcc_ddr: supplied by vdd_5v
[    0.302867] vcc_io_33: supplied by vdd_5v
[    0.305197] vcc_18: supplied by vcc_io_33
[    0.309350] vcc18_emmc: supplied by vcc_io_33
[    0.313567] vdd_10: supplied by vdd_5v
[    0.324986] rk808-rtc rk808-rtc: registered as rtc0
[    0.327170] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:09                                                                                         UTC (1453366209)
[    0.328588] i2c i2c-1: of_i2c: modalias failure on /i2c@ff160000/usb
[    0.329161] i2c i2c-1: Failed to create I2C device for /i2c@ff160000/usb
[    0.333557] cpu cpu0: EM: created perf domain
[    0.335762] sdhci: Secure Digital Host Controller Interface driver
[    0.336322] sdhci: Copyright(c) Pierre Ossman
[    0.336711] Synopsys Designware Multimedia Card Interface Driver
[    0.337608] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.338190] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[    0.338849] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[    0.339440] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[    0.339998] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h                                                                                        ost data width,256 deep fifo
[    0.341389] ledtrig-cpu: registered to indicate activity on CPUs
[    0.342337] usbcore: registered new interface driver usbhid
[    0.342832] usbhid: USB HID core driver
[    0.344516] NET: Registered protocol family 10
[    0.346068] Segment Routing with IPv6
[    0.346484] NET: Registered protocol family 17
[    0.346933] 8021q: 802.1Q VLAN Support v1.8
[    0.362587] vcc_sd: supplied by vcc_io_33
[    0.366132] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[    0.366732] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[    0.367522] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    0.368244] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[    0.368867] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[    0.369367] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[    0.369873] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[    0.370454] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[    0.371063] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[    0.376608] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[    0.377560] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    0.378200] rk_gmac-dwmac ff540000.ethernet:         DWMAC1000
[    0.378662] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register suppo                                                                                        rted
[    0.379318] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine suppo                                                                                        rted
[    0.379973] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[    0.380431] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[    0.381049] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[    0.381615] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[    0.382136] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[    0.382650] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watc                                                                                        hdog Timer
[    0.540561] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    0.541176] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[    0.541641] debugfs: Directory 'power-domain' with parent 'pm_genpd' already                                                                                         present!
[    0.542008] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[    0.542664] debugfs: Directory 'power-domain' with parent 'pm_genpd' already                                                                                         present!
[    0.543243] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[    0.544459] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h                                                                                        ost data width,256 deep fifo
[    0.545981] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[    0.555229] rockchip-pm-domain ff100000.syscon:power-controller: failed to ge                                                                                        t ack on domain 'power-domain', val=0x88220
[    0.563766] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,                                                                                         actual 400000HZ div = 0)
[    0.577795] Waiting for root device PARTUUID=5452574f-02...
[    0.578327] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    0.637126] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 1500000                                                                                        00Hz, actual 150000000HZ div = 0)
[    0.657481] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    0.713885] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    1.053161] dwmmc_rockchip ff500000.mmc: Successfully tuned phase to 78
[    1.053801] mmc0: new ultra high speed SDR104 SDHC card at address 0007
[    1.055947] mmcblk0: mmc0:0007 SD32G 29.9 GiB
[    1.058738]  mmcblk0: p1 p2
[    1.059761] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    1.095901] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[    1.097901] Freeing unused kernel memory: 1664K
[    1.137613] Run /sbin/init as init process
[    1.344770] init: Console is alive
[    2.120599] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.151772] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-d                                                                                        evel@redhat.com
[    2.160585] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    2.167589] ehci-fsl: Freescale EHCI Host controller driver
[    2.171441] usbcore: registered new interface driver uas
[    2.172373] kmodloader: done loading kernel modules from /etc/modules-boot.d/                                                                                        *
[    2.173790] init: - preinit -
[    2.526342] random: jshn: uninitialized urandom read (4 bytes read)
[    2.552959] random: jshn: uninitialized urandom read (4 bytes read)
[    2.609074] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    6.788574] mount_root: loading kmods from internal overlay
[    6.812679] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    6.817227] kmodloader: done loading kernel modules from //etc/modules-boot.d                                                                                        /*
[    6.990164] block: attempting to load /etc/config/fstab
[    6.997142] block: unable to load configuration (fstab: Entry not found)
[    6.997991] block: no usable configuration
[    7.068701] mount_root: overlay filesystem in /dev/loop0 has not been formatt                                                                                        ed yet
[    7.278869] random: mkfs.ext4: uninitialized urandom read (16 bytes read)
[    7.279602] random: mkfs.ext4: uninitialized urandom read (16 bytes read)
[    8.562295] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts:                                                                                         (null)
[    8.579074] block: attempting to load /etc/config/fstab
[    8.579631] block: unable to load configuration (fstab: Entry not found)
[    8.580257] block: no usable configuration
[    8.581702] mount_root: overlay filesystem has not been fully initialized yet
[    8.583285] mount_root: switching to ext4 overlay
[    8.796915] fuse: init (API version 7.32)
NTFS signature is missing.
Failed to mount '/dev/mmcblk0p1': Invalid argument
The device '/dev/mmcblk0p1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
[    9.425962] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[    9.442933] urandom-seed: Seed file not found (/etc/urandom.seed)
[    9.490344] procd: - early -
/etc/init.d/mjpg-streamer: device '/dev/video0' does not exist
[    9.778925] random: jshn: uninitialized urandom read (4 bytes read)
Failed to connect to ubus
[    9.855387] random: jshn: uninitialized urandom read (4 bytes read)
Failed to connect to ubus
[   10.149882] procd: - ubus -
[   10.212205] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.219762] procd: - init -
Please press Enter to activate this console.
[   10.448876] urngd: v1.0.2 started.
[   10.472136] random: crng init done
[   10.472467] random: 30 urandom warning(s) missed due to ratelimiting
[   10.506797] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.617920] Key type dns_resolver registered
[   10.635219] RPC: Registered named UNIX socket transport module.
[   10.635762] RPC: Registered udp transport module.
[   10.636178] RPC: Registered tcp transport module.
[   10.636593] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.648012] tun: Universal TUN/TAP device driver, 1.6
[   10.663983] gre: GRE over IPv4 demultiplexor driver
[   10.666196] ip_gre: GRE over IPv4 tunneling driver
[   10.690151] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   10.697430] NFS: Registering the id_resolver key type
[   10.697923] Key type id_resolver registered
[   10.698294] Key type id_legacy registered
[   10.771091] videodev: Linux video capture interface: v2.00
[   10.776664] GACT probability on
[   10.778616] Mirror/redirect action on
[   10.789877] u32 classifier
[   10.790138]     input device check on
[   10.790462]     Actions configured
[   10.803993] Simple TC action Loaded
[   10.829454] usbcore: registered new interface driver cdc_acm
[   10.829971] cdc_acm: USB Abstract Control Model driver for USB modems and ISD                                                                                        N adapters
[   10.832259] usbcore: registered new interface driver cdc_wdm
[   10.834166] Loading modules backported from Linux version v5.15.81-0-ge4a7232                                                                                        c917c
[   10.834847] Backport generated by backports.git v5.15.81-1-0-ge1867d55
[   10.854491] usbcore: registered new interface driver ipheth
[   10.942876] usbcore: registered new interface driver ums-alauda
[   10.944658] usbcore: registered new interface driver ums-cypress
[   10.946496] usbcore: registered new interface driver ums-datafab
[   10.949061] usbcore: registered new interface driver ums-freecom
[   10.951184] usbcore: registered new interface driver ums-isd200
[   10.953040] usbcore: registered new interface driver ums-jumpshot
[   10.954746] usbcore: registered new interface driver ums-karma
[   10.956562] usbcore: registered new interface driver ums-sddr09
[   10.958804] usbcore: registered new interface driver ums-sddr55
[   10.960894] usbcore: registered new interface driver ums-usbat
[   10.962948] usbcore: registered new interface driver usblp
[   10.977439] usbcore: registered new interface driver usbserial_generic
[   10.978143] usbserial: USB Serial support registered for generic
[   11.062980] xt_time: kernel timezone is -0000
[   11.066779] usbcore: registered new interface driver cdc_ether
[   11.072919] usbcore: registered new interface driver cdc_ncm
[   11.142444] gspca_main: v2.14.0 registered
[   11.145638] usbcore: registered new interface driver ov534
[   11.149875] usbcore: registered new interface driver gspca_zc3xx
[   11.152247] usbcore: registered new interface driver huawei_cdc_ncm
[   11.231108] PPP generic driver version 2.4.2
[   11.235382] NET: Registered protocol family 24
[   11.238603] PPTP driver version 0.8.5
[   11.245784] usbcore: registered new interface driver qmi_wwan
[   11.250743] usbcore: registered new interface driver rndis_host
[   11.253606] usbcore: registered new interface driver sierra
[   11.254271] usbserial: USB Serial support registered for Sierra USB modem
[   11.257786] usbcore: registered new interface driver sierra_net
[   11.275744] usbcore: registered new interface driver uvcvideo
[   11.276288] USB Video Class driver (1.1.1)
[   11.283769] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for info                                                                                        rmation.
[   11.284491] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c                                                                                        4.com>. All Rights Reserved.
[   11.326537] usbcore: registered new interface driver cdc_mbim
[   11.329509] usbcore: registered new interface driver option
[   11.330163] usbserial: USB Serial support registered for GSM modem (1-port)
[   11.336640] usbcore: registered new interface driver qcserial
[   11.337368] usbserial: USB Serial support registered for Qualcomm USB modem
[   11.351901] kmodloader: done loading kernel modules from /etc/modules.d/*
[   16.379646] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   16.740983] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   17.078767] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   17.418564] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   17.755595] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   18.085849] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   18.430806] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   18.773572] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   19.115318] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   19.455623] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   19.788779] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   29.048650] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [R                                                                                        TL8211E Gigabit Ethernet] (irq=POLL)
[   29.057596] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support                                                                                         found
[   29.058314] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[   29.059464] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii l                                                                                        ink mode
[   29.932236] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)

[pythonic]

As an experiment, try installing Openwrt from scratch then do a sysupgrade (i.e. upgrade through OpenWrt's web UI using the Gargoyle sysupgrade image) to see whether that behaves any better. NOTE: don't keep settings!

[BENROFU]

Flashing…
The system is flashing now.
DO NOT POWER OFF THE DEVICE!
Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings.


Nothing more ever happens.

[pythonic]

Firstly this discussion probably should be in it's own thread because it's not about x86 - mods, can this be split off into a new thread?

It's disappointing that flashing Gargoyle as a sysupgrade didn't appear to go anywhere, but that sometimes even happens with a successful flash in my experience. Did the device give any indication it might have rebooted at all? (e.g. LED flash sequence). Does the device respond to pings on the standard IP address? If after a decent wait period (perhaps at least 10-15 minutes), what happens if you forcibly refresh the browser window?

The other thing that I think would help the developers better understand what's going on is to capture the bootlog of your device booting from the Gargoyle native SD card installation as well as (for comparison) booting from an OpenWrt native SD card installation. This is usually best done with a serial console on many devices but I don't know what's possible with yours.

[BENROFU]

Sorry, i will try to make a new post for Nanopi R2S

[BENROFU]

I am trying to install gargoyle on nanopi r2s.
Here is bootlog from openwrt installed:

Code: Select all

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒                                                                                        ▒▒▒
U-Boot TPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21)
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000)
Trying to boot from MMC1
NOTICE:  BL31: v2.3():v2.3
NOTICE:  BL31: Built : 15:56:43, Apr 20 2020
NOTICE:  BL31:Rockchip release version: v1.2


U-Boot 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000) OpenWrt

Model: FriendlyElec NanoPi R2S
DRAM:  1022 MiB
PMIC:  RK8050 (on=0x40, off=0x00)
MMC:   mmc@ff500000: 1
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: FriendlyElec NanoPi R2S
Net:   eth0: ethernet@ff540000
Hit any key to stop autoboot:  0
MMC Device 0 not found
no mmc device at slot 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
352 bytes read in 4 ms (85.9 KiB/s)
## Executing script at 00500000
36620 bytes read in 6 ms (5.8 MiB/s)
14632968 bytes read in 645 ms (21.6 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=30b0000
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Device Tree to 000000003df25000, end 000000003df30f0b ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.161 (builder@buildhost) (aarch64-openwrt-linux                                                                                        -musl-gcc (OpenWrt GCC 11.2.0 r20028-43d71ad93e) 11.2.0, GNU ld (GNU Binutils) 2                                                                                        .37) #0 SMP PREEMPT Tue Jan 3 00:24:21 2023
[    0.000000] Machine model: FriendlyElec NanoPi R2S
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] cma: Reserved 8 MiB at 0x000000003f400000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 21 pages/cpu s46744 r8192 d31080 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 257544
[    0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio                                                                                        32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes,                                                                                         linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, li                                                                                        near)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1002740K/1046528K available (8510K kernel code, 2386K rwd                                                                                        ata, 1580K rodata, 1728K init, 726K bss, 35596K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif                                                                                        fies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:                                                                                         0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980                                                                                        46511097ns
[    0.001425] Console: colour dummy device 80x25
[    0.001913] Calibrating delay loop (skipped), value calculated using timer fr                                                                                        equency.. 48.00 BogoMIPS (lpj=240000)
[    0.002890] pid_max: default: 32768 minimum: 301
[    0.003557] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, line                                                                                        ar)
[    0.004258] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes,                                                                                         linear)
[    0.007436] rcu: Hierarchical SRCU implementation.
[    0.008220] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE                                                                                         build
[    0.009902] smp: Bringing up secondary CPUs ...
[    0.011075] Detected VIPT I-cache on CPU1
[    0.011178] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.012000] Detected VIPT I-cache on CPU2
[    0.012077] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.012884] Detected VIPT I-cache on CPU3
[    0.012956] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.013092] smp: Brought up 1 node, 4 CPUs
[    0.016419] SMP: Total of 4 processors activated.
[    0.016865] CPU features: detected: 32-bit EL0 Support
[    0.017352] CPU features: detected: CRC32 instructions
[    0.018261] CPU: All CPU(s) started at EL2
[    0.018675] alternatives: patching kernel code
[    0.029994] KASLR disabled due to lack of seed
[    0.030645] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                        x_idle_ns: 19112604462750000 ns
[    0.031577] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.032819] pinctrl core: initialized pinctrl subsystem
[    0.035226] NET: Registered protocol family 16
[    0.038616] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.039500] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allo                                                                                        cations
[    0.040438] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic al                                                                                        locations
[    0.042207] thermal_sys: Registered thermal governor 'step_wise'
[    0.042217] thermal_sys: Registered thermal governor 'power_allocator'
[    0.043174] cpuidle: using governor menu
[    0.044283] ASID allocator initialised with 65536 entries
[    0.044995] Serial: AMBA PL011 UART driver
[    0.075663] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.076309] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.076936] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.077566] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.080344] cryptd: max_cpu_qlen set to 1000
[    0.082925] reg-fixed-voltage sdmmc-regulator: Failed to register regulator:                                                                                         -517
[    0.084935] iommu: Default domain type: Translated
[    0.086823] SCSI subsystem initialized
[    0.087459] usbcore: registered new interface driver usbfs
[    0.088026] usbcore: registered new interface driver hub
[    0.088575] usbcore: registered new device driver usb
[    0.091097] clocksource: Switched to clocksource arch_sys_counter
[    0.092081] VFS: Disk quotas dquot_6.6.0
[    0.092531] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.098316] NET: Registered protocol family 2
[    0.099005] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line                                                                                        ar)
[    0.101631] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192                                                                                         bytes, linear)
[    0.102469] TCP established hash table entries: 8192 (order: 4, 65536 bytes,                                                                                         linear)
[    0.103300] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear                                                                                        )
[    0.104163] TCP: Hash tables configured (established 8192 bind 8192)
[    0.104957] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.105623] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.106582] NET: Registered protocol family 1
[    0.107032] PCI: CLS 0 bytes, default 64
[    0.113125] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.122513] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.123080] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_                                                                                        PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.125997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                        52)
[    0.126999] io scheduler mq-deadline registered
[    0.133999] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[    0.134651] dma-pl330 ff1f0000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num                                                                                        _Peri-20 Num_Events-16
[    0.138149] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.142678] printk: console [ttyS2] disabled
[    0.143181] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 20, base_baud =                                                                                         1500000) is a 16550A
[    0.144143] printk: console [ttyS2] enabled
[    0.144143] printk: console [ttyS2] enabled
[    0.144909] printk: bootconsole [uart8250] disabled
[    0.144909] printk: bootconsole [uart8250] disabled
[    0.155128] loop: module loaded
[    0.155435] mtip32xx Version 1.3.1
[    0.155910] Loading iSCSI transport class v2.0-870.
[    0.160841] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[    0.161480] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[    0.162208] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    0.162776] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available y                                                                                        et, deferred probing
[    0.166708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.167302] ehci-pci: EHCI PCI platform driver
[    0.167768] ehci-platform: EHCI generic platform driver
[    0.170697] ehci-platform ff5c0000.usb: EHCI Host Controller
[    0.171254] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus                                                                                         number 1
[    0.172132] ehci-platform ff5c0000.usb: irq 36, io mem 0xff5c0000
[    0.201103] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[    0.202350] hub 1-0:1.0: USB hub found
[    0.202724] hub 1-0:1.0: 1 port detected
[    0.203772] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.204365] ohci-platform: OHCI generic platform driver
[    0.205294] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[    0.205907] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus                                                                                         number 2
[    0.206798] ohci-platform ff5d0000.usb: irq 37, io mem 0xff5d0000
[    0.275795] hub 2-0:1.0: USB hub found
[    0.276181] hub 2-0:1.0: 1 port detected
[    0.277806] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.278325] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu                                                                                        mber 3
[    0.279227] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110                                                                                         quirks 0x0000000002010010
[    0.280126] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xff600000
[    0.281619] hub 3-0:1.0: USB hub found
[    0.282000] hub 3-0:1.0: 1 port detected
[    0.282744] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.283246] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu                                                                                        mber 4
[    0.283937] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    0.284587] usb usb4: We don't know the algorithms for LPM for this host, dis                                                                                        abling LPM.
[    0.285817] hub 4-0:1.0: USB hub found
[    0.286185] hub 4-0:1.0: 1 port detected
[    0.287100] usbcore: registered new interface driver usb-storage
[    0.287812] i2c /dev entries driver
[    0.291641] rk808 1-0018: chip id: 0x8050
[    0.299291] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    0.299884] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    0.302275] vdd_log: supplied by vdd_5v
[    0.304729] vdd_arm: supplied by vdd_5v
[    0.305341] vcc_ddr: supplied by vdd_5v
[    0.306896] vcc_io_33: supplied by vdd_5v
[    0.309221] vcc_18: supplied by vcc_io_33
[    0.313409] vcc18_emmc: supplied by vcc_io_33
[    0.317647] vdd_10: supplied by vdd_5v
[    0.329073] rk808-rtc rk808-rtc: registered as rtc0
[    0.331262] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:09                                                                                         UTC (1453366209)
[    0.332630] i2c i2c-1: of_i2c: modalias failure on /i2c@ff160000/usb
[    0.333205] i2c i2c-1: Failed to create I2C device for /i2c@ff160000/usb
[    0.337739] cpu cpu0: EM: created perf domain
[    0.340132] sdhci: Secure Digital Host Controller Interface driver
[    0.340696] sdhci: Copyright(c) Pierre Ossman
[    0.341215] Synopsys Designware Multimedia Card Interface Driver
[    0.342002] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.342538] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[    0.343210] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[    0.343802] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[    0.344393] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h                                                                                        ost data width,256 deep fifo
[    0.345764] ledtrig-cpu: registered to indicate activity on CPUs
[    0.346679] hid: raw HID events driver (C) Jiri Kosina
[    0.347302] usbcore: registered new interface driver usbhid
[    0.347793] usbhid: USB HID core driver
[    0.349531] NET: Registered protocol family 10
[    0.351364] Segment Routing with IPv6
[    0.351789] NET: Registered protocol family 17
[    0.352270] bridge: filtering via arp/ip/ip6tables is no longer available by                                                                                         default. Update your scripts to load br_netfilter if you need this.
[    0.353400] 8021q: 802.1Q VLAN Support v1.8
[    0.370706] vcc_sd: supplied by vcc_io_33
[    0.374511] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[    0.375111] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[    0.375787] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    0.376448] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[    0.377069] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[    0.377566] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[    0.378072] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[    0.378648] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[    0.379256] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[    0.384802] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[    0.385745] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    0.386386] rk_gmac-dwmac ff540000.ethernet:         DWMAC1000
[    0.386850] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register suppo                                                                                        rted
[    0.387506] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine suppo                                                                                        rted
[    0.388163] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[    0.388623] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[    0.389241] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[    0.389807] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[    0.390328] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[    0.390840] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watc                                                                                        hdog Timer
[    0.555463] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    0.555949] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[    0.556906] debugfs: Directory 'power-domain' with parent 'pm_genpd' already                                                                                         present!
[    0.556929] debugfs: Directory 'power-domain' with parent 'pm_genpd' already                                                                                         present!
[    0.557653] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[    0.558893] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[    0.559451] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h                                                                                        ost data width,256 deep fifo
[    0.560877] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[    0.569114] rockchip-pm-domain ff100000.syscon:power-controller: failed to ge                                                                                        t ack on domain 'power-domain', val=0x88220
[    0.579091] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,                                                                                         actual 400000HZ div = 0)
[    0.593108] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    0.594131] Waiting for root device PARTUUID=5452574f-02...
[    0.651378] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    0.653468] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 1500000                                                                                        00Hz, actual 150000000HZ div = 0)
[    0.701550] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    1.351171] dwmmc_rockchip ff500000.mmc: Successfully tuned phase to 75
[    1.351821] mmc0: new ultra high speed SDR104 SDHC card at address 0007
[    1.353839] mmcblk0: mmc0:0007 SD32G 29.9 GiB
[    1.356761]  mmcblk0: p1 p2
[    1.357828] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    1.382951] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fs                                                                                        ck is recommended
[    2.100096] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (n                                                                                        ull)
[    2.100870] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.102950] Freeing unused kernel memory: 1728K
[    2.103508] Run /sbin/init as init process
[    2.153873] init: Console is alive
[    2.231696] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.240395] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    2.242583] kmodloader: done loading kernel modules from /etc/modules-boot.d/                                                                                        *
[    2.246128] init: - preinit -
[    2.411523] random: jshn: uninitialized urandom read (4 bytes read)
[    2.441561] random: jshn: uninitialized urandom read (4 bytes read)
[    2.498309] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    6.638444] mount_root: mounting /dev/root
[    6.642324] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.692228] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[    6.703545] urandom-seed: Seeding with /etc/urandom.seed
[    6.725464] procd: - early -
[    7.289859] procd: - ubus -
[    7.299031] random: ubusd: uninitialized urandom read (4 bytes read)
[    7.340819] random: ubusd: uninitialized urandom read (4 bytes read)
[    7.342285] random: ubusd: uninitialized urandom read (4 bytes read)
[    7.345505] procd: - init -
Please press Enter to activate this console.
[    7.489220] urngd: v1.0.2 started.
[    7.512867] random: crng init done
[    7.513208] random: 23 urandom warning(s) missed due to ratelimiting
[    7.534508] kmodloader: loading kernel modules from /etc/modules.d/*
[    7.559004] usbcore: registered new interface driver r8152
[    7.562744] usbcore: registered new interface driver cdc_ether
[    7.564757] usbcore: registered new interface driver cdc_ncm
[    7.592227] PPP generic driver version 2.4.2
[    7.593759] NET: Registered protocol family 24
[    7.599566] kmodloader: done loading kernel modules from /etc/modules.d/*
[    7.757068] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hc                                                                                        d
[    7.799151] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Invalid ether                                                                                         addr 00:00:00:00:00:00
[    7.800003] r8152 4-1:1.0 (unnamed net_device) (uninitialized): Random ether                                                                                         addr d2:fb:33:0b:3f:d5
[    7.827377] r8152 4-1:1.0: load rtl8153b-2 v1 10/23/19 successfully
[    7.872807] r8152 4-1:1.0 eth1: v1.11.11
[    7.873800] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[   10.598492] br-lan: port 1(eth1) entered blocking state
[   10.599000] br-lan: port 1(eth1) entered disabled state
[   10.599871] device eth1 entered promiscuous mode
[   10.603656] br-lan: port 1(eth1) entered blocking state
[   10.604169] br-lan: port 1(eth1) entered forwarding state
[   10.692483] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [R                                                                                        TL8211E Gigabit Ethernet] (irq=POLL)
[   10.701263] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support                                                                                         found
[   10.701987] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[   10.703323] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii l                                                                                        ink mode
[   11.591841] br-lan: port 1(eth1) entered disabled state

Here are serial log from what happens when i try to upgrade from openwrt to gargoyle with gargoyle_1.15.x-rockchip-armv8-friendlyarm_nanopi-r2s-squashfs-sysupgrade.img.gz on webif in openwrt.

Code: Select all

Thu Jan 21 08:51:08 UTC 2016 upgrade: Sending TERM to remaining processes ...
Thu Jan 21 08:51:12 UTC 2016 upgrade: Sending KILL to remaining processes ...
[   69.461503] stage2 (2487): drop_caches: 3
Thu Jan 21 08:51:18 UTC 2016 upgrade: Switching to ramdisk...
[   71.306309] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Thu Jan 21 08:51:20 UTC 2016 upgrade: Performing system upgrade...
Thu Jan 21 08:51:20 UTC 2016 upgrade: Reading partition table from bootdisk...
0+1 records in
0+1 records out
zcat: write error: Broken pipe
zcat: write: Broken pipe
Thu Jan 21 08:51:20 UTC 2016 upgrade: Reading partition table from image...
Writing image to /dev/mmcblk0p1...
zcat: write error: Broken pipe
zcat: write: Broken pipe
32768+0 records in
16+0 records out
Writing image to /dev/mmcblk0p2...
212992+0 records in
104+0 records out
Writing new UUID to /dev/mmcblk0...
zcat: write error: Broken pipe
zcat: write: Broken pipe
Thu Jan 21 08:51:27 UTC 2016 upgrade: Upgrade completed
Thu Jan 21 08:51:28 UTC 2016 upgrade: Rebooting system...
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[   80.095373] xhci-hcd xhci-hcd.0.auto: remove, state 1
[   80.095869] usb usb4: USB disconnect, device number 1
[   80.096331] usb 4-1: USB disconnect, device number 2
[   80.097995] br-lan: port 1(eth1) entered disabled state
[   80.102071] device eth1 left promiscuous mode
[   80.102504] br-lan: port 1(eth1) entered disabled state
[   80.283262] xhci-hcd xhci-hcd.0.auto: USB bus 4 deregistered
[   80.283817] xhci-hcd xhci-hcd.0.auto: remove, state 4
[   80.284288] usb usb3: USB disconnect, device number 1
[   80.286138] xhci-hcd xhci-hcd.0.auto: USB bus 3 deregistered
[   80.287447] reboot: Restarting system

U-Boot TPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21)
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000)
Trying to boot from MMC1
NOTICE:  BL31: v2.3():v2.3
NOTICE:  BL31: Built : 15:56:43, Apr 20 2020
NOTICE:  BL31:Rockchip release version: v1.2


U-Boot 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000) OpenWrt

Model: FriendlyElec NanoPi R2S
DRAM:  1022 MiB
PMIC:  RK8050 (on=0x40, off=0x00)
MMC:   mmc@ff500000: 1
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: FriendlyElec NanoPi R2S
Net:   eth0: ethernet@ff540000
Hit any key to stop autoboot:  0
MMC Device 0 not found
no mmc device at slot 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
352 bytes read in 3 ms (114.3 KiB/s)
## Executing script at 00500000
36620 bytes read in 5 ms (7 MiB/s)
14501896 bytes read in 640 ms (21.6 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=3090000
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Device Tree to 000000003df25000, end 000000003df30f0b ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.161 (michael@michael-NUC8i7BEH) (aarch64-openw                                                                                        rt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19160+882-7ea2f3d6e2) 11.2.0, GNU ld (GNU                                                                                         Binutils) 2.37) #0 SMP PREEMPT Sun Jan 22 00:35:16 2023
[    0.000000] Machine model: FriendlyElec NanoPi R2S
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] cma: Reserved 8 MiB at 0x000000003f400000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 21 pages/cpu s45784 r8192 d32040 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 257544
[    0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio                                                                                        32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes,                                                                                         linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, li                                                                                        near)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1002864K/1046528K available (7870K kernel code, 2322K rwd                                                                                        ata, 2264K rodata, 1664K init, 708K bss, 35472K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif                                                                                        fies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:                                                                                         0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980                                                                                        46511097ns
[    0.001393] Console: colour dummy device 80x25
[    0.001853] Calibrating delay loop (skipped), value calculated using timer fr                                                                                        equency.. 48.00 BogoMIPS (lpj=240000)
[    0.002799] pid_max: default: 32768 minimum: 301
[    0.003443] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, line                                                                                        ar)
[    0.004127] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes,                                                                                         linear)
[    0.006802] rcu: Hierarchical SRCU implementation.
[    0.007472] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE                                                                                         build
[    0.009146] smp: Bringing up secondary CPUs ...
[    0.010242] Detected VIPT I-cache on CPU1
[    0.010348] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.011080] Detected VIPT I-cache on CPU2
[    0.011148] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.011869] Detected VIPT I-cache on CPU3
[    0.011933] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.012060] smp: Brought up 1 node, 4 CPUs
[    0.015287] SMP: Total of 4 processors activated.
[    0.015719] CPU features: detected: 32-bit EL0 Support
[    0.016189] CPU features: detected: CRC32 instructions
[    0.016999] CPU: All CPU(s) started at EL2
[    0.017401] alternatives: patching kernel code
[    0.028154] KASLR disabled due to lack of seed
[    0.028913] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                        x_idle_ns: 19112604462750000 ns
[    0.029820] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.031008] pinctrl core: initialized pinctrl subsystem
[    0.032955] NET: Registered protocol family 16
[    0.036205] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.037337] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allo                                                                                        cations
[    0.038260] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic al                                                                                        locations
[    0.040031] thermal_sys: Registered thermal governor 'step_wise'
[    0.040041] thermal_sys: Registered thermal governor 'power_allocator'
[    0.040964] cpuidle: using governor menu
[    0.042032] ASID allocator initialised with 65536 entries
[    0.042688] Serial: AMBA PL011 UART driver
[    0.073037] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.073667] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.074276] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.074885] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.077404] cryptd: max_cpu_qlen set to 1000
[    0.079545] reg-fixed-voltage sdmmc-regulator: Failed to register regulator:                                                                                         -517
[    0.081524] iommu: Default domain type: Translated
[    0.083143] SCSI subsystem initialized
[    0.083761] usbcore: registered new interface driver usbfs
[    0.084307] usbcore: registered new interface driver hub
[    0.084837] usbcore: registered new device driver usb
[    0.087296] clocksource: Switched to clocksource arch_sys_counter
[    0.088084] VFS: Disk quotas dquot_6.6.0
[    0.088533] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.094473] NET: Registered protocol family 2
[    0.095137] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line                                                                                        ar)
[    0.097186] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192                                                                                         bytes, linear)
[    0.098015] TCP established hash table entries: 8192 (order: 4, 65536 bytes,                                                                                         linear)
[    0.098828] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear                                                                                        )
[    0.099670] TCP: Hash tables configured (established 8192 bind 8192)
[    0.100499] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.101146] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.102088] NET: Registered protocol family 1
[    0.102528] PCI: CLS 0 bytes, default 64
[    0.107924] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[    0.115683] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.116235] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_                                                                                        PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.119188] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                        52)
[    0.119876] io scheduler mq-deadline registered
[    0.126925] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[    0.127603] dma-pl330 ff1f0000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num                                                                                        _Peri-20 Num_Events-16
[    0.131100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.133356] printk: console [ttyS2] disabled
[    0.133843] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 20, base_baud =                                                                                         1500000) is a 16550A
[    0.134766] printk: console [ttyS2] enabled
[    0.134766] printk: console [ttyS2] enabled
[    0.135517] printk: bootconsole [uart8250] disabled
[    0.135517] printk: bootconsole [uart8250] disabled
[    0.144781] loop: module loaded
[    0.145085] mtip32xx Version 1.3.1
[    0.149481] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[    0.150086] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[    0.150807] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    0.151376] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available y                                                                                        et, deferred probing
[    0.155335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.155928] ehci-platform: EHCI generic platform driver
[    0.158838] ehci-platform ff5c0000.usb: EHCI Host Controller
[    0.159378] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus                                                                                         number 1
[    0.160231] ehci-platform ff5c0000.usb: irq 36, io mem 0xff5c0000
[    0.197260] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[    0.198485] hub 1-0:1.0: USB hub found
[    0.198858] hub 1-0:1.0: 1 port detected
[    0.199892] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.200480] ohci-platform: OHCI generic platform driver
[    0.201406] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[    0.202027] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus                                                                                         number 2
[    0.202911] ohci-platform ff5d0000.usb: irq 37, io mem 0xff5d0000
[    0.271931] hub 2-0:1.0: USB hub found
[    0.272307] hub 2-0:1.0: 1 port detected
[    0.273838] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.274356] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu                                                                                        mber 3
[    0.275251] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110                                                                                         quirks 0x0000000002010010
[    0.276157] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xff600000
[    0.277591] hub 3-0:1.0: USB hub found
[    0.277963] hub 3-0:1.0: 1 port detected
[    0.278705] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.279210] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu                                                                                        mber 4
[    0.279901] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    0.280546] usb usb4: We don't know the algorithms for LPM for this host, dis                                                                                        abling LPM.
[    0.281779] hub 4-0:1.0: USB hub found
[    0.282148] hub 4-0:1.0: 1 port detected
[    0.283043] usbcore: registered new interface driver usb-storage
[    0.283758] i2c /dev entries driver
[    0.287574] rk808 1-0018: chip id: 0x8050
[    0.293273] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    0.293865] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    0.296258] vdd_log: supplied by vdd_5v
[    0.298772] vdd_arm: supplied by vdd_5v
[    0.299387] vcc_ddr: supplied by vdd_5v
[    0.300903] vcc_io_33: supplied by vdd_5v
[    0.303238] vcc_18: supplied by vcc_io_33
[    0.307361] vcc18_emmc: supplied by vcc_io_33
[    0.311604] vdd_10: supplied by vdd_5v
[    0.322704] rk808-rtc rk808-rtc: registered as rtc0
[    0.324884] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:51:38                                                                                         UTC (1453366298)
[    0.326249] i2c i2c-1: of_i2c: modalias failure on /i2c@ff160000/usb
[    0.326825] i2c i2c-1: Failed to create I2C device for /i2c@ff160000/usb
[    0.331190] cpu cpu0: EM: created perf domain
[    0.333385] sdhci: Secure Digital Host Controller Interface driver
[    0.333946] sdhci: Copyright(c) Pierre Ossman
[    0.334332] Synopsys Designware Multimedia Card Interface Driver
[    0.335157] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.335793] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[    0.336451] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[    0.337039] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[    0.337609] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h                                                                                        ost data width,256 deep fifo
[    0.339043] ledtrig-cpu: registered to indicate activity on CPUs
[    0.340012] usbcore: registered new interface driver usbhid
[    0.340506] usbhid: USB HID core driver
[    0.341845] NET: Registered protocol family 10
[    0.343202] Segment Routing with IPv6
[    0.343600] NET: Registered protocol family 17
[    0.344032] 8021q: 802.1Q VLAN Support v1.8
[    0.359546] vcc_sd: supplied by vcc_io_33
[    0.362901] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[    0.363495] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[    0.364169] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    0.364834] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[    0.365455] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[    0.365952] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[    0.366460] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[    0.367034] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[    0.367910] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[    0.373461] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[    0.374442] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    0.375080] rk_gmac-dwmac ff540000.ethernet:         DWMAC1000
[    0.375542] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register suppo                                                                                        rted
[    0.376197] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine suppo                                                                                        rted
[    0.376852] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[    0.377335] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[    0.377953] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[    0.378517] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[    0.379038] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[    0.379551] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watc                                                                                        hdog Timer
[    0.540364] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    0.540984] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[    0.541480] debugfs: Directory 'power-domain' with parent 'pm_genpd' already                                                                                         present!
[    0.541808] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[    0.542471] debugfs: Directory 'power-domain' with parent 'pm_genpd' already                                                                                         present!
[    0.543049] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[    0.544264] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit h                                                                                        ost data width,256 deep fifo
[    0.546129] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[    0.555126] rockchip-pm-domain ff100000.syscon:power-controller: failed to ge                                                                                        t ack on domain 'power-domain', val=0x88220
[    0.563532] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,                                                                                         actual 400000HZ div = 0)
[    0.577396] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    0.578549] Waiting for root device PARTUUID=5452574f-02...
[    0.636878] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 1500000                                                                                        00Hz, actual 150000000HZ div = 0)
[    1.053095] dwmmc_rockchip ff500000.mmc: Successfully tuned phase to 80
[    1.053727] mmc0: new ultra high speed SDR104 SDHC card at address 0007
[    1.055896] mmcblk0: mmc0:0007 SD32G 29.9 GiB
[    1.058607]  mmcblk0: p1 p2
[    1.059672] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    1.075582] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[    1.077485] Freeing unused kernel memory: 1664K
[    1.127598] Run /sbin/init as init process
[    1.384486] init: Console is alive
[    2.155432] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.186494] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-d                                                                                        evel@redhat.com
[    2.195655] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    2.202667] ehci-fsl: Freescale EHCI Host controller driver
[    2.206418] usbcore: registered new interface driver uas
[    2.207437] kmodloader: done loading kernel modules from /etc/modules-boot.d/                                                                                        *
[    2.213748] init: - preinit -
[    2.558111] random: jshn: uninitialized urandom read (4 bytes read)
[    2.583617] random: jshn: uninitialized urandom read (4 bytes read)
[    2.641328] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    2.857675] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.922215] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout,                                                                                         ignoring dependency
[    6.817904] mount_root: loading kmods from internal overlay
[    6.842050] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    6.846557] kmodloader: done loading kernel modules from //etc/modules-boot.d                                                                                        /*
[    7.003717] block: attempting to load /etc/config/fstab
[    7.010857] block: unable to load configuration (fstab: Entry not found)
[    7.011579] block: no usable configuration
[    7.088687] mount_root: overlay filesystem in /dev/loop0 has not been formatt                                                                                        ed yet
[    7.303611] random: mkfs.ext4: uninitialized urandom read (16 bytes read)
[    7.304344] random: mkfs.ext4: uninitialized urandom read (16 bytes read)
[    8.658305] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts:                                                                                         (null)
[    8.675508] block: attempting to load /etc/config/fstab
[    8.676080] block: unable to load configuration (fstab: Entry not found)
[    8.676715] block: no usable configuration
[    8.678330] mount_root: overlay filesystem has not been fully initialized yet
[    8.679883] mount_root: switching to ext4 overlay
[    8.882429] fuse: init (API version 7.32)
NTFS signature is missing.
Failed to mount '/dev/mmcblk0p1': Invalid argument
The device '/dev/mmcblk0p1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
[    9.668464] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[    9.684725] urandom-seed: Seed file not found (/etc/urandom.seed)
[    9.731031] procd: - early -
/etc/init.d/mjpg-streamer: device '/dev/video0' does not exist
[   10.018926] random: jshn: uninitialized urandom read (4 bytes read)
Failed to connect to ubus
[   10.094536] random: jshn: uninitialized urandom read (4 bytes read)
Failed to connect to ubus
[   10.374124] procd: - ubus -
[   10.434176] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.442012] procd: - init -
Please press Enter to activate this console.
[   10.666005] urngd: v1.0.2 started.
[   10.690179] random: crng init done
[   10.690518] random: 30 urandom warning(s) missed due to ratelimiting
[   10.755831] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.861101] Key type dns_resolver registered
[   10.878435] RPC: Registered named UNIX socket transport module.
[   10.878974] RPC: Registered udp transport module.
[   10.879385] RPC: Registered tcp transport module.
[   10.879799] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.891280] tun: Universal TUN/TAP device driver, 1.6
[   10.906919] gre: GRE over IPv4 demultiplexor driver
[   10.909288] ip_gre: GRE over IPv4 tunneling driver
[   10.932604] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   10.940339] NFS: Registering the id_resolver key type
[   10.940832] Key type id_resolver registered
[   10.941202] Key type id_legacy registered
[   11.014152] videodev: Linux video capture interface: v2.00
[   11.019794] GACT probability on
[   11.021637] Mirror/redirect action on
[   11.032837] u32 classifier
[   11.033099]     input device check on
[   11.033423]     Actions configured
[   11.046842] Simple TC action Loaded
[   11.072185] usbcore: registered new interface driver cdc_acm
[   11.072704] cdc_acm: USB Abstract Control Model driver for USB modems and ISD                                                                                        N adapters
[   11.074968] usbcore: registered new interface driver cdc_wdm
[   11.076832] Loading modules backported from Linux version v5.15.81-0-ge4a7232                                                                                        c917c
[   11.077614] Backport generated by backports.git v5.15.81-1-0-ge1867d55
[   11.097055] usbcore: registered new interface driver ipheth
[   11.186869] usbcore: registered new interface driver ums-alauda
[   11.188750] usbcore: registered new interface driver ums-cypress
[   11.190750] usbcore: registered new interface driver ums-datafab
[   11.192429] usbcore: registered new interface driver ums-freecom
[   11.194141] usbcore: registered new interface driver ums-isd200
[   11.195885] usbcore: registered new interface driver ums-jumpshot
[   11.197880] usbcore: registered new interface driver ums-karma
[   11.200059] usbcore: registered new interface driver ums-sddr09
[   11.202000] usbcore: registered new interface driver ums-sddr55
[   11.203900] usbcore: registered new interface driver ums-usbat
[   11.205867] usbcore: registered new interface driver usblp
[   11.221657] usbcore: registered new interface driver usbserial_generic
[   11.222353] usbserial: USB Serial support registered for generic
[   11.306440] xt_time: kernel timezone is -0000
[   11.310717] usbcore: registered new interface driver cdc_ether
[   11.317745] usbcore: registered new interface driver cdc_ncm
[   11.394504] gspca_main: v2.14.0 registered
[   11.402249] usbcore: registered new interface driver ov534
[   11.406222] usbcore: registered new interface driver gspca_zc3xx
[   11.409327] usbcore: registered new interface driver huawei_cdc_ncm
[   11.489106] PPP generic driver version 2.4.2
[   11.509539] NET: Registered protocol family 24
[   11.512789] PPTP driver version 0.8.5
[   11.516839] usbcore: registered new interface driver qmi_wwan
[   11.521919] usbcore: registered new interface driver rndis_host
[   11.524625] usbcore: registered new interface driver sierra
[   11.525278] usbserial: USB Serial support registered for Sierra USB modem
[   11.528356] usbcore: registered new interface driver sierra_net
[   11.542085] usbcore: registered new interface driver uvcvideo
[   11.542614] USB Video Class driver (1.1.1)
[   11.548282] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for info                                                                                        rmation.
[   11.548993] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c                                                                                        4.com>. All Rights Reserved.
[   11.590395] usbcore: registered new interface driver cdc_mbim
[   11.593236] usbcore: registered new interface driver option
[   11.593855] usbserial: USB Serial support registered for GSM modem (1-port)
[   11.600258] usbcore: registered new interface driver qcserial
[   11.600866] usbserial: USB Serial support registered for Qualcomm USB modem
[   11.615847] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.971092] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   16.339487] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   16.669949] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   17.009207] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   17.345388] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   17.680783] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   18.026258] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   18.371438] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   18.709838] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   19.045830] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   19.382520] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)
[   29.358584] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [R                                                                                        TL8211E Gigabit Ethernet] (irq=POLL)
[   29.367545] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support                                                                                         found
[   29.368246] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[   29.369435] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii l                                                                                        ink mode
[   30.277467] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (n                                                                                        ull)

Just stops here. Red stable light on SYS. No LAN led, no ip.


My hope someone with better knowledge than i can help me installing gargoyle on this device.

[BENROFU]

When i power off/on, after i tried to update i get this log:

Code: Select all

U-Boot TPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21)
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000)
Trying to boot from MMC1
NOTICE:  BL31: v2.3():v2.3
NOTICE:  BL31: Built : 15:56:43, Apr 20 2020
NOTICE:  BL31:Rockchip release version: v1.2


U-Boot 2021.07-OpenWrt-r20028-43d71ad93e (Jan 03 2023 - 00:24:21 +0000) OpenWrt

Model: FriendlyElec NanoPi R2S
DRAM:  1022 MiB
PMIC:  RK8050 (on=0x40, off=0x00)
MMC:   mmc@ff500000: 1
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: FriendlyElec NanoPi R2S
Net:   eth0: ethernet@ff540000
Hit any key to stop autoboot:  0
MMC Device 0 not found
no mmc device at slot 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
352 bytes read in 3 ms (114.3 KiB/s)
## Executing script at 00500000
36620 bytes read in 6 ms (5.8 MiB/s)
14501896 bytes read in 639 ms (21.6 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=3090000
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Device Tree to 000000003df25000, end 000000003df30f0b ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.161 (michael@michael-NUC8i7BEH) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19160+882-7ea2f3d6e2) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP PREEMPT Sun Jan 22 00:35:16 2023
[    0.000000] Machine model: FriendlyElec NanoPi R2S
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000] cma: Reserved 8 MiB at 0x000000003f400000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 21 pages/cpu s45784 r8192 d32040 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 257544
[    0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio32,0xff130000 root=PARTUUID=5452574f-02 rw rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1002864K/1046528K available (7870K kernel code, 2322K rwdata, 2264K rodata, 1664K init, 708K bss, 35472K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001426] Console: colour dummy device 80x25
[    0.001901] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.002879] pid_max: default: 32768 minimum: 301
[    0.003536] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.004239] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.006938] rcu: Hierarchical SRCU implementation.
[    0.007621] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.009313] smp: Bringing up secondary CPUs ...
[    0.010422] Detected VIPT I-cache on CPU1
[    0.010527] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.011260] Detected VIPT I-cache on CPU2
[    0.011330] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.012043] Detected VIPT I-cache on CPU3
[    0.012107] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.012234] smp: Brought up 1 node, 4 CPUs
[    0.015567] SMP: Total of 4 processors activated.
[    0.016013] CPU features: detected: 32-bit EL0 Support
[    0.016497] CPU features: detected: CRC32 instructions
[    0.017323] CPU: All CPU(s) started at EL2
[    0.017735] alternatives: patching kernel code
[    0.028595] KASLR disabled due to lack of seed
[    0.029272] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030207] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.031432] pinctrl core: initialized pinctrl subsystem
[    0.033394] NET: Registered protocol family 16
[    0.036663] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.037813] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.038821] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.040564] thermal_sys: Registered thermal governor 'step_wise'
[    0.040576] thermal_sys: Registered thermal governor 'power_allocator'
[    0.041522] cpuidle: using governor menu
[    0.042617] ASID allocator initialised with 65536 entries
[    0.043289] Serial: AMBA PL011 UART driver
[    0.073638] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.074285] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.074915] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.075544] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.078061] cryptd: max_cpu_qlen set to 1000
[    0.080348] reg-fixed-voltage sdmmc-regulator: Failed to register regulator: -517
[    0.082488] iommu: Default domain type: Translated
[    0.084323] SCSI subsystem initialized
[    0.084948] usbcore: registered new interface driver usbfs
[    0.085515] usbcore: registered new interface driver hub
[    0.086063] usbcore: registered new device driver usb
[    0.088367] clocksource: Switched to clocksource arch_sys_counter
[    0.089176] VFS: Disk quotas dquot_6.6.0
[    0.089636] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.095423] NET: Registered protocol family 2
[    0.096107] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.098172] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.099037] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.099868] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.100732] TCP: Hash tables configured (established 8192 bind 8192)
[    0.101521] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.102188] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.103138] NET: Registered protocol family 1
[    0.103592] PCI: CLS 0 bytes, default 64
[    0.109278] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[    0.117062] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.117630] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.120529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.121239] io scheduler mq-deadline registered
[    0.128235] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[    0.128970] dma-pl330 ff1f0000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.132454] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.134709] printk: console [ttyS2] disabled
[    0.135209] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 20, base_baud = 1500000) is a 16550A
[    0.136162] printk: console [ttyS2] enabled
[    0.136162] printk: console [ttyS2] enabled
[    0.136926] printk: bootconsole [uart8250] disabled
[    0.136926] printk: bootconsole [uart8250] disabled
[    0.146268] loop: module loaded
[    0.146576] mtip32xx Version 1.3.1
[    0.150895] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[    0.151503] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[    0.152230] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    0.152798] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available yet, deferred probing
[    0.156751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.157342] ehci-platform: EHCI generic platform driver
[    0.160258] ehci-platform ff5c0000.usb: EHCI Host Controller
[    0.160795] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 1
[    0.161655] ehci-platform ff5c0000.usb: irq 36, io mem 0xff5c0000
[    0.188369] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[    0.189571] hub 1-0:1.0: USB hub found
[    0.189944] hub 1-0:1.0: 1 port detected
[    0.190989] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.191578] ohci-platform: OHCI generic platform driver
[    0.192509] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[    0.193124] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 2
[    0.193975] ohci-platform ff5d0000.usb: irq 37, io mem 0xff5d0000
[    0.263022] hub 2-0:1.0: USB hub found
[    0.263401] hub 2-0:1.0: 1 port detected
[    0.264938] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.265458] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[    0.266377] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    0.267278] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xff600000
[    0.268730] hub 3-0:1.0: USB hub found
[    0.269100] hub 3-0:1.0: 1 port detected
[    0.269845] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    0.270349] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    0.271041] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    0.271684] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.272898] hub 4-0:1.0: USB hub found
[    0.273264] hub 4-0:1.0: 1 port detected
[    0.274161] usbcore: registered new interface driver usb-storage
[    0.274881] i2c /dev entries driver
[    0.278710] rk808 1-0018: chip id: 0x8050
[    0.286325] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    0.286916] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    0.289309] vdd_log: supplied by vdd_5v
[    0.291731] vdd_arm: supplied by vdd_5v
[    0.292332] vcc_ddr: supplied by vdd_5v
[    0.293880] vcc_io_33: supplied by vdd_5v
[    0.296193] vcc_18: supplied by vcc_io_33
[    0.300428] vcc18_emmc: supplied by vcc_io_33
[    0.304638] vdd_10: supplied by vdd_5v
[    0.316071] rk808-rtc rk808-rtc: registered as rtc0
[    0.318255] rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:09 UTC (1453366209)
[    0.319661] i2c i2c-1: of_i2c: modalias failure on /i2c@ff160000/usb
[    0.320235] i2c i2c-1: Failed to create I2C device for /i2c@ff160000/usb
[    0.324643] cpu cpu0: EM: created perf domain
[    0.326783] sdhci: Secure Digital Host Controller Interface driver
[    0.327341] sdhci: Copyright(c) Pierre Ossman
[    0.327728] Synopsys Designware Multimedia Card Interface Driver
[    0.328512] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.329049] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[    0.329710] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[    0.330301] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[    0.330866] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
[    0.332288] ledtrig-cpu: registered to indicate activity on CPUs
[    0.333292] usbcore: registered new interface driver usbhid
[    0.333787] usbhid: USB HID core driver
[    0.335470] NET: Registered protocol family 10
[    0.336971] Segment Routing with IPv6
[    0.337382] NET: Registered protocol family 17
[    0.337834] 8021q: 802.1Q VLAN Support v1.8
[    0.354810] vcc_sd: supplied by vcc_io_33
[    0.357909] rk_gmac-dwmac ff540000.ethernet: IRQ eth_wake_irq not found
[    0.358566] rk_gmac-dwmac ff540000.ethernet: IRQ eth_lpi not found
[    0.359251] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    0.359943] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[    0.360565] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[    0.361062] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[    0.361569] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[    0.362146] rk_gmac-dwmac ff540000.ethernet: cannot get clock clk_mac_speed
[    0.362754] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[    0.368298] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[    0.369238] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    0.369878] rk_gmac-dwmac ff540000.ethernet:         DWMAC1000
[    0.370339] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
[    0.370995] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
[    0.371651] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[    0.372111] rk_gmac-dwmac ff540000.ethernet: TX Checksum insertion supported
[    0.372729] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[    0.373294] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[    0.373815] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[    0.374328] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    0.531561] dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
[    0.531781] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[    0.532225] dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
[    0.533179] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    0.533546] dwmmc_rockchip ff500000.mmc: Version ID is 270a
[    0.534231] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[    0.534750] dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
[    0.537269] dw-apb-uart ff130000.serial: forbid DMA for kernel console
[    0.546895] rockchip-pm-domain ff100000.syscon:power-controller: failed to get ack on domain 'power-domain', val=0x88220
[    0.554620] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    0.568489] Waiting for root device PARTUUID=5452574f-02...
[    0.569257] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[    0.627792] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    0.648656] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    0.705217] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[    1.045289] dwmmc_rockchip ff500000.mmc: Successfully tuned phase to 81
[    1.045924] mmc0: new ultra high speed SDR104 SDHC card at address 0007
[    1.048090] mmcblk0: mmc0:0007 SD32G 29.9 GiB
[    1.050860]  mmcblk0: p1 p2
[    1.051874] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[    1.100472] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[    1.102221] Freeing unused kernel memory: 1664K
[    1.148696] Run /sbin/init as init process
[    1.414194] init: Console is alive
[    2.202245] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.233570] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    2.242577] reg-fixed-voltage vcc-rtl8153-regulator: deferred probe timeout, ignoring dependency
[    2.249676] ehci-fsl: Freescale EHCI Host controller driver
[    2.253518] usbcore: registered new interface driver uas
[    2.254457] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.264354] init: - preinit -
[    2.613045] random: jshn: uninitialized urandom read (4 bytes read)
[    2.641179] random: jshn: uninitialized urandom read (4 bytes read)
[    2.697702] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    6.886816] mount_root: loading kmods from internal overlay
[    6.912496] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    6.917164] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    7.078495] block: attempting to load /etc/config/fstab
[    7.086893] block: unable to load configuration (fstab: Entry not found)
[    7.087630] block: no usable configuration
[    8.568412] random: crng init done
[    8.568753] random: 3 urandom warning(s) missed due to ratelimiting
[    8.730131] EXT4-fs (loop0): recovery complete
[    8.734131] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    8.758320] block: attempting to load /etc/config/fstab
[    8.759049] block: unable to load configuration (fstab: Entry not found)
[    8.759711] block: no usable configuration
[    8.761055] mount_root: switching to ext4 overlay
[    8.964226] fuse: init (API version 7.32)
NTFS signature is missing.
Failed to mount '/dev/mmcblk0p1': Invalid argument
The device '/dev/mmcblk0p1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
[    9.089329] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[    9.093625] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[    9.107250] urandom-seed: Seeding with /etc/urandom.seed
[    9.161602] procd: - early -
/etc/init.d/mjpg-streamer: device '/dev/video0' does not exist
Failed to connect to ubus
Failed to connect to ubus
[    9.766145] procd: - ubus -
[    9.823735] procd: - init -
Please press Enter to activate this console.
[   10.049492] urngd: v1.0.2 started.
[   10.148114] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.251431] Key type dns_resolver registered
[   10.268645] RPC: Registered named UNIX socket transport module.
[   10.269188] RPC: Registered udp transport module.
[   10.269602] RPC: Registered tcp transport module.
[   10.270017] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.281365] tun: Universal TUN/TAP device driver, 1.6
[   10.297117] gre: GRE over IPv4 demultiplexor driver
[   10.299345] ip_gre: GRE over IPv4 tunneling driver
[   10.323023] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   10.331471] NFS: Registering the id_resolver key type
[   10.331971] Key type id_resolver registered
[   10.332344] Key type id_legacy registered
[   10.406138] videodev: Linux video capture interface: v2.00
[   10.411798] GACT probability on
[   10.413650] Mirror/redirect action on
[   10.425068] u32 classifier
[   10.425330]     input device check on
[   10.425651]     Actions configured
[   10.439381] Simple TC action Loaded
[   10.464275] usbcore: registered new interface driver cdc_acm
[   10.464790] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   10.467120] usbcore: registered new interface driver cdc_wdm
[   10.469105] Loading modules backported from Linux version v5.15.81-0-ge4a7232c917c
[   10.469787] Backport generated by backports.git v5.15.81-1-0-ge1867d55
[   10.489145] usbcore: registered new interface driver ipheth
[   10.563698] usbcore: registered new interface driver ums-alauda
[   10.565323] usbcore: registered new interface driver ums-cypress
[   10.566923] usbcore: registered new interface driver ums-datafab
[   10.568502] usbcore: registered new interface driver ums-freecom
[   10.570197] usbcore: registered new interface driver ums-isd200
[   10.571828] usbcore: registered new interface driver ums-jumpshot
[   10.573893] usbcore: registered new interface driver ums-karma
[   10.576456] usbcore: registered new interface driver ums-sddr09
[   10.578610] usbcore: registered new interface driver ums-sddr55
[   10.580586] usbcore: registered new interface driver ums-usbat
[   10.582594] usbcore: registered new interface driver usblp
[   10.602232] usbcore: registered new interface driver usbserial_generic
[   10.603017] usbserial: USB Serial support registered for generic
[   10.685634] xt_time: kernel timezone is -0000
[   10.689960] usbcore: registered new interface driver cdc_ether
[   10.695711] usbcore: registered new interface driver cdc_ncm
[   10.757300] gspca_main: v2.14.0 registered
[   10.761387] usbcore: registered new interface driver ov534
[   10.765143] usbcore: registered new interface driver gspca_zc3xx
[   10.767754] usbcore: registered new interface driver huawei_cdc_ncm
[   10.843483] PPP generic driver version 2.4.2
[   10.870373] NET: Registered protocol family 24
[   10.874435] PPTP driver version 0.8.5
[   10.880031] usbcore: registered new interface driver qmi_wwan
[   10.885655] usbcore: registered new interface driver rndis_host
[   10.888760] usbcore: registered new interface driver sierra
[   10.889454] usbserial: USB Serial support registered for Sierra USB modem
[   10.892647] usbcore: registered new interface driver sierra_net
[   10.908440] usbcore: registered new interface driver uvcvideo
[   10.908978] USB Video Class driver (1.1.1)
[   10.916580] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   10.917309] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   10.968199] usbcore: registered new interface driver cdc_mbim
[   10.970976] usbcore: registered new interface driver option
[   10.971536] usbserial: USB Serial support registered for GSM modem (1-port)
[   10.978010] usbcore: registered new interface driver qcserial
[   10.978749] usbserial: USB Serial support registered for Qualcomm USB modem
[   10.994014] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.423496] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   15.427774] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   15.809725] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   15.813635] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   16.242790] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   16.246559] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   16.641167] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   16.645086] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   16.942192] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   16.945970] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   17.237583] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   17.241426] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   17.545809] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   17.549586] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   17.789658] rk_gmac-dwmac ff540000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
[   17.808653] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found
[   17.809389] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[   17.810708] rk_gmac-dwmac ff540000.ethernet eth0: configuring for phy/rgmii link mode
[   17.866464] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   17.870435] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   18.236688] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   18.240820] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   18.581050] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   18.585012] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[   18.808930] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[   18.812835] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)

[Lantis]

Give me 5 minutes i'll load up another test image for you to try

I'll also split this thread out

[Lantis]

Posts have been moved into the new thread you created.

Try out new images at the same link
https://lantisproject.com/gargoyle_cust ... /rockchip/