Version 1.12.0 : New stable version

The latest news about Gargoyle

Moderator: Moderators

Post Reply
derdon
Posts: 1
Joined: Fri Jan 24, 2020 9:47 am

Re: Version 1.12.0 : New stable version

Post by derdon »

Hi.
Why there is no USB Printer functionality in version 1.12 on TL-WRD4300

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.12.0 : New stable version

Post by Lantis »

To save space on the initial install and allow us to keep supporting your device. You can install it as a plugin now.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ysy
Posts: 56
Joined: Sat Oct 28, 2017 12:24 pm
Location: Hong Kong !!

Re: Version 1.12.0 : New stable version

Post by ysy »

Thanks mates!
Two minor issues to report back:
1) Guest wifi user can access the admin page.
2) Disabled 2.4G and turned on 5G only. SSID won't show up for guests.
Cheers

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.12.0 : New stable version

Post by Lantis »

ysy wrote:Thanks mates!
Two minor issues to report back:
1) Guest wifi user can access the admin page.
2) Disabled 2.4G and turned on 5G only. SSID won't show up for guests.
Cheers
1. so they can see a quota assigned to them.
2. As in your primary network is only enabled for 5G, or you have both 2.4 and 5, but guest is only set to 5?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ysy
Posts: 56
Joined: Sat Oct 28, 2017 12:24 pm
Location: Hong Kong !!

Re: Version 1.12.0 : New stable version

Post by ysy »

Lantis wrote: 2. As in your primary network is only enabled for 5G, or you have both 2.4 and 5, but guest is only set to 5?
First set both 2.4 n 5 G radios on with SSID 'Gargoyle', and turned Guest 2.4 n 5 G on with SSID 'Gargoyle1'. Worked well.
Then disabled 2.4G radio, could login 'Gargoyle' but not for 'Gargoyle1' (correction: can see the SSID).
Cheers

ps. just tried disabling 5G radio instead of 2.4G, could login both 'Gargoyle' and 'Gargoyle1'.

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.12.0 : New stable version

Post by Lantis »

I'm reasonably certain that your issue is due to the browser autofilling a different password under the guest password box when you toggle certain settings.

Try the experiment again but tick the Reveal password box first and make sure both passwords are as you expect.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

fifonik
Posts: 162
Joined: Fri Dec 02, 2016 3:52 am
Location: Brisbane, AU

Re: Version 1.12.0 : New stable version

Post by fifonik »

> issue is due to the browser autofilling

I've seen this quite a few times already. Have you tried to add autocomplete="off" to the input? I know this is not standardized, but it works at least for some browsers.

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.12.0 : New stable version

Post by Lantis »

I looked at it a while ago, but being against standard means it is a bit of a no go.
Plus, for username/password type fields (which wifi password is), the browser overrides the behaviour anyway.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Waterspuwer
Posts: 36
Joined: Mon Nov 12, 2018 6:04 am

Re: Version 1.12.0 : New stable version

Post by Waterspuwer »

Any chance of a 1.12.0 build based on OpenWrt 19.07.1? It supposedly fixes the 5 GHz issue I'm having (~2s delay on WiFi).

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.12.0 : New stable version

Post by Lantis »

I will update the code, but at this stage no planned release.
You can compile yourself or ask someone else to do so.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply