TP-LINK Archer C7 Gargoyle
Moderator: Moderators
Re: TP-LINK Archer C7 Gargoyle
What is max tx power (dbm) on this router? (V2)
wdr3600 v1.5 @ Latest ispyisail build
-
- Posts: 1
- Joined: Fri Oct 27, 2017 3:14 pm
Re: TP-LINK Archer C7 Gargoyle
Hi there Guys.
After a long time waiting, i would like to know if there is some custom firmware for my archer c7 v1.1 who works fully with all frequencies of the router (2.4ghz and 5ghz).
I´ved tried a few months to flash with dd-wrt firmware but i´ved almost bricked the router.
Tks a million for replying me.
After a long time waiting, i would like to know if there is some custom firmware for my archer c7 v1.1 who works fully with all frequencies of the router (2.4ghz and 5ghz).
I´ved tried a few months to flash with dd-wrt firmware but i´ved almost bricked the router.
Tks a million for replying me.
Re: TP-LINK Archer C7 Gargoyle
No Gargoyle version.
I’m not sure there ever will be. From my reading the 5ghz isn’t supported by the driver. It’s a bad revision of the router for open source.
I’m not sure there ever will be. From my reading the 5ghz isn’t supported by the driver. It’s a bad revision of the router for open source.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: TP-LINK Archer C7 Gargoyle
I am planning to replace my Archer C7v1.1 with a Ubiquiti AP AC PRO to connect wireless clients, and I was hoping that I could flash Gargoyle onto it to "upgrade" my WR1043N. As I would not need the WiFi, the primary concern for most C7v1.x users wouldn't apply to my use case.
From what I have heard, it doesn't seem likely to work at all on v1.x routers, but if someone could provide a clear/definitive answer (WRT is supposed to work on v1.x), I would appreciate it.
From what I have heard, it doesn't seem likely to work at all on v1.x routers, but if someone could provide a clear/definitive answer (WRT is supposed to work on v1.x), I would appreciate it.
Re: TP-LINK Archer C7 Gargoyle
Gargoyle works on the Archer C7 1.x, but 5ghz doesn’t
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: TP-LINK Archer C7 Gargoyle
My C7 works great, 2.4 and 5ghz with the latest Nov iSpay build. What I don't understand is why my speed test shows 200 mbps/sec but if I go directly thru the gateway I get almost 950 mbps. I have a gigabyte fiber.
Why would it make such a big diffference?
Why would it make such a big diffference?
Re: TP-LINK Archer C7 Gargoyle
Your CPU can’t keep up with the data
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: TP-LINK Archer C7 Gargoyle
I suspected HW.Lantis wrote:Your CPU can’t keep up with the data
Thanks for clarifying.