TP-Link WR1043ND - V1.5.8 - Connect on demand not working

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
Rapsody
Posts: 9
Joined: Thu Sep 13, 2012 1:27 pm

TP-Link WR1043ND - V1.5.8 - Connect on demand not working

Post by Rapsody »

Hi,

Device Name:Gargoyle
Gargoyle Version:1.5.8
Model:TP-Link TL-WR1043N/ND v1
Device Configuration:Gateway

Connect via: PPPOE
Reconnect mode: Connect on demand 5 minutes

Not connecting to the network. If i choose Keep Alive it works.
IS there any way to setup to a working configuration "connect on demand" ?

Grg
Posts: 5
Joined: Wed May 03, 2017 2:25 am

Re: TP-Link WR1043ND - V1.5.8 - Connect on demand not working

Post by Grg »

Hi,

I have exact the same problem, but with Gargoyle 1.8.1.

Did u find some solution?

Rapsody
Posts: 9
Joined: Thu Sep 13, 2012 1:27 pm

Re: TP-Link WR1043ND - V1.5.8 - Connect on demand not working

Post by Rapsody »

Grg wrote:Hi,

I have exact the same problem, but with Gargoyle 1.8.1.

Did u find some solution?
Hi,

No solution. It is the same on all versions.

Lantis
Moderator
Posts: 6920
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: TP-Link WR1043ND - V1.5.8 - Connect on demand not working

Post by Lantis »

https://bugs.lede-project.org/index.php ... ask_id=654

Does the suggested fix solve it for you?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply