Version 1.9.2

[user3282]

user3282: What Lantis said is true, but could easily be misinterpreted.

To clarify: you need to press a button for at least 3 seconds to make the button do what it is programmed to do, not that you need to press both buttons at the same time.

The WPS/Reset button, if held for at least 3 seconds will reset the router to Gargoyle defaults. The Wifi On/Off button will reboot the router.

Hi Eric, I tested the WiFi on/off button and it not reboot the router. First I only press it and before I hold it for 3+ seconds and not reboot too.

[Smashing]

About the tables.


Before when full screen (Window Size 1920) the UI had fixed width. The table was compact and easy to read. Now the column width varies with the width of the window dynamically.

This example: in Bandwidh Usage Table

At this size of Window, the table fill all the space by itself, if I expand the window size on Bandwith usage:

Then shares it with Download Bandwith Data and the columns are narrower and they will expand as my screen became bigger.

However in B/W Distribution are two problems with 1920x1200.
The pie charts are always in vertical layout, and the size of Host names varies with the window size. Check the same window size:

and then just making it a few pixels wider.

From usable to much bigger.

In the previous screenshot you can also see the white space because of the layout (1 item). This causes the table below to be as wide as the window.
Here it is an example how would look in a super wide screen:

Not as easy to read as the previous version.

This could improve for bigger screens to keep the Host name to a fixed maximum size and put the table side by side.

---- Fonts big or small
I was referring to the button class btn-lg the padding and font are too big.
class


This is default:

and this reduced the font to 14px and padding.


The size of the buttons is just personal taste, good for fingers bad for screens.

If you need something more clear just ask and what other people think about this.

[westapher317]

Wifi toggle button isn't working for 1043nd v2. Just resets instead.

That is by design.
If you want it to do something different there's plenty of info here and on other sites

Oh right. Just found one of you scripts and changed it to make it work for the 1043nd. Thanks!

Ricky, can you point out where you found the script? I seem to be having some trouble finding it.

Edit: P.S. Never mind, I think I found it: viewtopic.php?f=7&t=980

[Lantis]

So you're saying you're having problems in excess of 1920x1200 resolutions??
That's definitely not something I looked at.

I will try to. I have a dual monitor setup so if I stretch it across th I may be able to simulate something to that effect.

[Smashing]

So you're saying you're having problems in excess of 1920x1200 resolutions??
That's definitely not something I looked at.

I will try to. I have a dual monitor setup so if I stretch it across th I may be able to simulate something to that effect.

Just at 1920 and below, I think table should have a fixed maximum width.

[ispyisail]

My screen is 1920 x 1080 and i'm seeing the same problems

To be far i'm getting used to it but its still not as good as the original.

On a cell phone it looks and works great.

[ektus]

Something isn't quite right. 1.9.2 has been installed over one of the latest 1.9.x from January preserving the settings and has been working fine since. Now I had to change the WAN settings, and WAN is dead. Restore backup from four weeks ago, WAN is alive. Change something in connection settings, WAN dies. I'll try to investigate further, but don't know where to look. Router: TP-Link Archer C7 V2.

I'll try and update to latest 1.9.x again and see what happens.


Regards
Ektus.

[Smashing]

Tonight I had a power outage UPS kicked in, batteries run out and I found the Gargoyle Router had only 1 light. (No wireless). Rebooted the router and plugged in the serial port. Keeps rebooting itself. I can connect trough SSH or Web for a few seconds

It reboots itself.

Code: Select all

[   38.910000] br-lan: port 2(wlan0) entered forwarding state
[   40.300000] random: nonblocking pool is initialized
[   82.740000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
[   82.740000]                old minutes west=0, new minutes west=-60
[  102.450000] CPU 0 Unable to handle kernel paging request at virtual address 46928e50, epc == 809b3c3c, ra == 809b3e1c
[  102.460000] Oops[#1]:
[  102.460000] CPU: 0 PID: 2610 Comm: bw_set Not tainted 3.18.45 #13
[  102.460000] task: 819b1360 ti: 81570000 task.ti: 81570000
[  102.460000] $ 0   : 00000000 7ff294f0 46928e50 00000001
[  102.460000] $ 4   : 80e7a780 0000000c 81674680 0001b7bf
[  102.460000] $ 8   : 00000001 0001b7be 81674700 00200040
[  102.460000] $12   : 00000000 00004000 00000000 00000000
[  102.460000] $16   : 80e7a880 81568000 81674500 c53c0e50
[  102.460000] $20   : 58bb5500 00000000 58ba0380 58a78071
[  102.460000] $24   : 00000002 80295b08                  
[  102.460000] $28   : 81570000 81571df8 58babc76 809b3e1c
[  102.460000] Hi    : 00000000
[  102.460000] Lo    : 0000434d
[  102.460000] epc   : 809b3c3c apply_to_every_string_map_value+0x1314/0x1638 [ipt_bandwidth]
[  102.460000]     Not tainted
[  102.460000] ra    : 809b3e1c apply_to_every_string_map_value+0x14f4/0x1638 [ipt_bandwidth]
[  102.460000] Status: 1000dc03	KERNEL EXL IE 
[  102.460000] Cause : 80800008
[  102.460000] BadVA : 46928e50
[  102.460000] PrId  : 00019374 (MIPS 24Kc)
[  102.460000] Modules linked in: ath9k ath9k_common qcserial pppoe ppp_async option iptable_nat cdc_mbim ath9k_hw ath usb_wwan sierra_net sierra rndis_host qmi_wwan pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_nat_ipv4 nf_nat_amanda nf_conntrack_pptp nf_conntrack_ipv4 nf_conntrack_amanda mac80211 ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ebtable_nat ebtable_filter ebtable_broute cfg80211 cdc_ncm cdc_ether xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_quota xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_iprange xt_id xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY usbserial usbnet usblp ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda ts_kmp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast lzo_decompress lzo_compress iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables ebtables ebt_vlan ebt_stp ebt_snat ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_ip ebt_dnat ebt_arpreply ebt_arpnat ebt_arp ebt_among ebt_802_3 crc_ccitt compat cdc_wdm cdc_acm fuse em_nbyte sch_teql sch_htb sch_prio act_ipt sch_gred sch_dsmark cls_basic sch_codel em_text em_meta act_police sch_pie sch_tbf sch_sfq sch_fq em_cmp sch_red act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress ledtrig_usbdev xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_��

Another piece of log:

Code: Select all

[  102.230000] Call Trace:
[  102.230000] [<808d3c3c>] apply_to_every_string_map_value+0x1314/0x1638 [ipt_bandwidth]
[  102.230000] [<808d3e1c>] apply_to_every_string_map_value+0x14f4/0x1638 [ipt_bandwidth]
[  102.230000] 
[  102.230000] 
Code: 104000aa  02331021  93a3001c <10600096> 8c550000  8c430004  8e040000  afa30070  8c830064 
[  102.640000] ---[ end trace 96c8ce5d96bc0234 ]---
[  102.650000] Kernel panic - not syncing: Fatal exception in interrupt
[  102.650000] Rebooting in 3 seconds..�

EDIT: What a weird bug, I just keep getting errors after this:

Code: Select all

ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
[   82.500000]                old minutes west=0, new minutes west=-60

So
changed timezone to GMT+0 and stop rebooting.

[ektus]

Does the reboot also happen if you disconnect the WAN port? If not, it might be the usual corruption of usage data and wrong system time.


Regards
Ektus.

[Smashing]

Does the reboot also happen if you disconnect the WAN port? If not, it might be the usual corruption of usage data and wrong system time.


Regards
Ektus.

I dind't try this, but right now changing the timezone fixed the problem and everything is working without problems. usage data works. Graphs and everything.