Version 1.9.1
Moderator: Moderators
Re: Version 1.9.1
Following the initial upgraded my TP-WR1043ND V2.1 from V1.9.0 (with Setting Preserved), I had been able to Save the Router's Configuration. A month later all of my Attempts to Save the Router's Configuration Fail, the result being the Router would Reboot itself each time! Web Browsers used for these attempts were Firefox, Chrome, IE 11 and Edge under Window 10 Home.
I Reset the TP-WR1043ND V2.1 using the Router's Reset Button (30 Seconds), Reconfigured the Router and I am now able to Save the Router's Configuration???
Particularities of my Configuration are: No Wireless, PPPoE, 105 DHCP (Ethers) Entries, 3 Inbound Ports and an External USB Drive. The only changes since the Initial Configuration had been successfully saved were related to re-entering Password for the Shared Folders (which Lantis told me was expected since I had upgraded from 1.9.0 with settings preserved) and changes to the DHCP Entries.
NOTE: With so many DHCP Entries I did have problems with my DHCP Table being Truncated when I was running V1.8.0 and V1.8.1 on a TP-WR941ND V3.6 Router, although with the V1.9.X Series on the TP-WR1043ND V2.1 Router that has NOT been an "Issue"...
I Reset the TP-WR1043ND V2.1 using the Router's Reset Button (30 Seconds), Reconfigured the Router and I am now able to Save the Router's Configuration???
Particularities of my Configuration are: No Wireless, PPPoE, 105 DHCP (Ethers) Entries, 3 Inbound Ports and an External USB Drive. The only changes since the Initial Configuration had been successfully saved were related to re-entering Password for the Shared Folders (which Lantis told me was expected since I had upgraded from 1.9.0 with settings preserved) and changes to the DHCP Entries.
NOTE: With so many DHCP Entries I did have problems with my DHCP Table being Truncated when I was running V1.8.0 and V1.8.1 on a TP-WR941ND V3.6 Router, although with the V1.9.X Series on the TP-WR1043ND V2.1 Router that has NOT been an "Issue"...
-
- Posts: 28
- Joined: Mon Apr 08, 2013 8:20 am
Re: Version 1.9.1
I upgraded my 1043nd v2.1 from 1.9.0 to 1.9.1 without preserving settings, and everything goes smoothly.
If you preserved settings from previous versions, for God's sake, please stop whining here.
If you preserved settings from previous versions, for God's sake, please stop whining here.
-
- Posts: 108
- Joined: Sun Apr 08, 2012 6:54 am
Re: Version 1.9.1
Thanx for a very improved form of gargoyle. your work is appriciateable.
I have Bufallo WZR-600-DHP
but i got some problem, when i enable Qos Upload stream then i can not have internet access.
i saw rply posts that the problem is in layer 7.
is there any update so i can preserve settings. or any downgrade version so settings could b preserved.
2. in Firewall Quota page. table sorting is not working in WZR 600DHP, but it was working in 1043 v2
3. In Status Qouta Usage Page have Percent used /bytes use/ limit is selectable of any one... can it be all in one collumns. as it is in Login page.
I have Bufallo WZR-600-DHP
but i got some problem, when i enable Qos Upload stream then i can not have internet access.
i saw rply posts that the problem is in layer 7.
is there any update so i can preserve settings. or any downgrade version so settings could b preserved.
2. in Firewall Quota page. table sorting is not working in WZR 600DHP, but it was working in 1043 v2
3. In Status Qouta Usage Page have Percent used /bytes use/ limit is selectable of any one... can it be all in one collumns. as it is in Login page.
Re: Version 1.9.1
Just like to chime in here and say that I read the shortlist of updates and upgraded from 1.8 and was surprised when the kids started complaining that the Xbox was talking about a lack of UPNP.
If you are going to remove major features on an upgrade mention it boldly in the short list of upgrade notes.
If you are going to remove major features on an upgrade mention it boldly in the short list of upgrade notes.
Re: Version 1.9.1
http://www.gargoyle-router.com/phpbb/vi ... 859#p33222reditburd wrote:Just like to chime in here and say that I read the shortlist of updates and upgraded from 1.8 and was surprised when the kids started complaining that the Xbox was talking about a lack of UPNP.
If you are going to remove major features on an upgrade mention it boldly in the short list of upgrade notes.
It was mentioned in the last version.
http://www.gargoyle-router.com/wiki/doku.php?id=1.9.x
And it was mentioned on the change log page
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Version 1.9.1
I have addressed this issue for the next version.petbrau wrote:The german translation of TOR is defective.
Workaround:
If the english file /www/i18n/English-EN/tor.js is copied into the folder /plugin_root/www/i18n/German-DE the TOR page is usable.
If the english text of this tor.js file is exchanged by the german text (the german tor.js file was saved before) the german translation works as expected.
https://github.com/lantis1008/gargoyle/ ... 3dcf3bca79
The BOM was missing at the beginning of the file.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Version 1.9.1
jeez, that post is quite ignorant...gumball3000 wrote:I upgraded my 1043nd v2.1 from 1.9.0 to 1.9.1 without preserving settings, and everything goes smoothly.
If you preserved settings from previous versions, for God's sake, please stop whining here.
this is the discussion forum for the current release of the gargoyle firmware, the point of this forum is to actually talk about problems and issues regarding that release.
as the 'preserve settings' option is a part of that release, it is only natural to point out flaws in the implementation.
furthermore: the perceived consensus here was that you shouldn't preserve when flashing upgrades with major differences. a reversion change 1.9.0 -> 1.9.1 does not qualify for me as a major upgrade.
in short: this is not about 'whining' as you have so eloquently put it, this is about letting the devs know that there is something wrong with that option, especially for the last release on wr1043nd, as most of the bricks have occurred on that device.
so just be happy that couple of people have tried to flash before you and have given their input. if anything you should be thankful that users are letting others know what to expect so that you won't have to serial unbrick..., or whine..., or anything...
Re: Version 1.9.1
@frosty
The Dev's know about the problem
You can attempt to preserve your old settings by ticking Attempt to Preserve Settings below. Be aware that this can potentially lead to problems if the new version is significantly newer than the old version, but for small, incremental differences this will likely work. It is always best to keep a backup just in case.
Not always
My advice is to any user who attempts to use "Attempt to Preserve Settings" before posting anywhere about any problems, first do a failsafe reset to check the problem still exists.
"Attempt to Preserve Settings" is a known problem
The Dev's know about the problem
You can attempt to preserve your old settings by ticking Attempt to Preserve Settings below. Be aware that this can potentially lead to problems if the new version is significantly newer than the old version, but for small, incremental differences this will likely work. It is always best to keep a backup just in case.
.......likely work
Not always
My advice is to any user who attempts to use "Attempt to Preserve Settings" before posting anywhere about any problems, first do a failsafe reset to check the problem still exists.
"Attempt to Preserve Settings" is a known problem
Re: Version 1.9.1
Hi:
Linksys WRT400n
flashed ok 1.9.1 from 1.6.2
Reboot or power cycle will lost configurations and router return to factory default.
This not happen on 1.6.2.
Any suggestion?
Ron
Linksys WRT400n
flashed ok 1.9.1 from 1.6.2
Reboot or power cycle will lost configurations and router return to factory default.
This not happen on 1.6.2.
Any suggestion?
Ron
Re: Version 1.9.1
Firstboot reset or reflashing 1.9.1 then try again.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.