I am new to gargoyle , but I can Confirm that i faced the same issue with version 1.8.0 , My router : TP-Link TL-WR841N/ND v9 , and yes more than one window of Gargoyle where opened , but only one that i was changing .
*******************************
(EDIT)
I have tried to use just one window ( using Google chrome and IE ) , once i change any thing at the default rules at QOS (upload) , I canot save any thing at the QOS (Download) , as when i change the QOS ( Download) and click save changes , then going to the QOS (upload) then back to the QOS (Download) , I find that nothing i have made is saved at the QOS ( Download) , this is a series problem that preventing me from using the whole QOS , I really will appreciate any help .
QoS configuration disappears after power loss and breaks WAN
Moderator: Moderators
-
- Posts: 33
- Joined: Thu Aug 27, 2015 6:25 pm
Re: QoS configuration disappears after power loss and breaks
Archer C7 V5 / Gargoyle 1.12.0
TL-WR1043ND V2 / Gargoyle 1.10.0
TL-WR841ND V9 / GArgoyle 1.10.0
TL-WR1043ND V2 / Gargoyle 1.10.0
TL-WR841ND V9 / GArgoyle 1.10.0
Re: QoS configuration disappears after power loss and breaks
It's a known bug, just use one tab when updating QoS for download and upload then save it.
regards
regards
Gargoyle 1.9.x on Buffalo WZR-HP-AG300H
Gargoyle 1.10.x on TP-Link Archer C7 v2.0
Gargoyle 1.11.x on WRT3200 acm
Gargoyle 1.10.x on TP-Link Archer C7 v2.0
Gargoyle 1.11.x on WRT3200 acm
-
- Posts: 33
- Joined: Thu Aug 27, 2015 6:25 pm
Re: QoS configuration disappears after power loss and breaks
Thanks , I have managed to solve it by hard reset the router , now i can can save both QOS download and upload , it seems that changing it while opening opening a new tab has destroyed the config file completely , so only a hard rest could solve it .coits wrote:It's a known bug, just use one tab when updating QoS for download and upload then save it.
regards
Archer C7 V5 / Gargoyle 1.12.0
TL-WR1043ND V2 / Gargoyle 1.10.0
TL-WR841ND V9 / GArgoyle 1.10.0
TL-WR1043ND V2 / Gargoyle 1.10.0
TL-WR841ND V9 / GArgoyle 1.10.0
Re: QoS configuration disappears after power loss and breaks
This solves many problemshard reset the router
I don't know if this was your case but many people preserve setting on upgrade which causes no end of problems
Re: QoS configuration disappears after power loss and breaks
Version 1.9.2 on 1043ND V3 and the problem still exists.
I will try to follow the advice:
Is it RAM problem? Or script execution time problem?
Can it be somewhere configured? Can I increase the time for script execution after clicking save?
I will try to follow the advice:
But mainly I wanted to write that I've encountered a similar problem when writing other configuration elements. The most annoying for me is Firewall -> Restrictions page. I need sometimes just to enable/disable one rule and than Save Changes. Sometimes works fine but sometimes my whole firewall configuration disappearscoits wrote:It's a known bug, just use one tab when updating QoS for download and upload then save it.
Is it RAM problem? Or script execution time problem?
Can it be somewhere configured? Can I increase the time for script execution after clicking save?
Re: QoS configuration disappears after power loss and breaks WAN
It's seems to be a Session State Tracking issue.
Don't have the Gargoyle Interface open in multiple windows or tabs. Use Gargoyle only as 1 page open and it won't happen.
Don't have the Gargoyle Interface open in multiple windows or tabs. Use Gargoyle only as 1 page open and it won't happen.
Netgear WNDR3700v4 (N600) - Gargoyle 1.14.x
D-Link DIR-835 - Gargoyle 1.7.1 (Deceased)
Manual set up for PIA's OpenVPN in (Private Internet Access): https://www.gargoyle-router.com/phpbb/viewtopic.php?f=11&t=9129&p=45410#p45410
D-Link DIR-835 - Gargoyle 1.7.1 (Deceased)
Manual set up for PIA's OpenVPN in (Private Internet Access): https://www.gargoyle-router.com/phpbb/viewtopic.php?f=11&t=9129&p=45410#p45410
Re: QoS configuration disappears after power loss and breaks WAN
+1encro wrote:It's seems to be a Session State Tracking issue.
Don't have the Gargoyle Interface open in multiple windows or tabs. Use Gargoyle only as 1 page open and it won't happen.
Also, try to always keep a recent backup of your settings, so if anything goes wrong, you can always manually restore it (WinSCP) in no time.
TP-Link Archer C7 v2 - Gargoyle 1.12.X
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1